• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.401-412
• /
• 2003

In this paper, a broadband phase shifter structure using a new switched network was proposed. A new reference network is composed of coupled lines and 45$^{\circ}$open and short stubs, which are shunted at the edge points of a main line, respectively, A delay network is composed of only a standard transmission line. It is possible to design a broadband 180$^{\circ}$phase shifter that phase dispersive characteristics by an impedance ratio R of coupled lines and greater phase dispersive characteristics by characteristic impedances Zm, Zs of a main line and stubs are used together. By considering a structure symmetry, the even and odd mode analysis was performed to obtain theoretical S-parameters of the proposed phase shifter. Also, through computer simulation on the basis of derived equations, design graphs were presented to optimally design a 180$^{\circ}$broadband phase shifter. Design graphs provide the values of characteristic impedances Zm, Zs, and I/O match and phase bandwidths. To verify electrical performances of the broadband phase shifter proposed in this paper, low different 180$^{\circ}$phase shifters, operated at the center frequency 3 GHz were designed and fabricated using design graphs, and were experimented. One of them was designed as a standard Schiffman structure to compare with electrical performances. Measured results of each phase shifter to satisfy simultaneously design conditions of I/O match （VSWR=1.15:1) and maximum phase deviation $({\varepsilon}_{{\Delta}{\phi}}＝{\pm}2^{\circ})$ were well in agreement with corresponding simulation results over impedance match and phase error bandwidths, and showed broadband characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.862-877
• /
• 2008

In this paper, two types of wideband 3-dB ring hybrids are compared and discussed to show the ring hybrid with a set of coupled-line sections better. However, the better one still has a realization problem that perfect matching can be achieved only with -3 dB coupling power. To solve the problem, a set of coupled-line sections with two shorts is synthesized using one- and two-port equivalent circuits and design equations are derived to have perfect matching, regardless of the coupling power. Based on the design equations, a modified ${\Pi}-type$ of transmission-line equivalent circuit is newly suggested. It consists of coupled-line sections with two shorts and two open stubs and can be used to reduce a transmission-line section, especially when its electrical length is greater than ${\pi}$. Therefore, the $3\;{\lambda}/4$ transmission-line section of a conventional ring hybrid can be reduced to less than ${\pi}/2$. To verify the modified ${\Pi}-type$ of transmission- line equivalent circuit, two kinds of simulations are carried out; one is fixing the electrical length of the coupled-line sections and the other fixing its coupling coefficient. The simulation results show that the bandwidths of resulting small transmission lines are strongly dependent on the coupling power. Using modified and conventional ${\Pi}-types$ of transmission-line equivalent circuits, a small ring hybrid is built and named a compact wideband coupled-line ring hybrid, due to the fact that a set of coupled-line sections is included. One of compact ring hybrids is compared with a conventional ring hybrid and the compared results demonstrate that the bandwidth of a proposed compact ring hybrid is much wider, in spite of being more than three times smaller in size. To test the compact ring hybrids, a microstrip compact ring hybrid, whose total transmission-line length is $220^{\circ}$, is fabricated and measured. The measured power divisions($S_{21}$, $S_{41}$, $S_{23}$ and $S_{43}$) are -2.78 dB, -3.34 dB, -2.8 dB and -3.2 dB, respectively at a design center frequency of 2 GHz, matching and isolation less than -20 dB in more than 20 % fractional bandwidth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.80-87
• /
• 2006

In this paper, we analyze the performance of IEEE 802.11b WLAN communication between access point(AP) and mobile equipment(ME) in 2.4 GHz band with noise and interference factors. WLAN communication at in-vehicle environment is assumed as the communication between main vehicle controller and electronic device such as sensor, ECU (Electrical Control Unit) in vehicle on telematics field for implementing wireless vehicle control system. Received interference level from other system's mobile equipment in the same band and automobile noise from each part of vehicle can be the main factors that can cause increasing error rate of control signal. With these (actors, we focus on the Eb/No the BER performance of WLAN for analyzing the characteristic of interference factors by the measured bit error rate.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.227-234
• /
• 2011

Many technologies for wireless internet are increasing as more and more laptop computers, net books, smart phone and other terminals, which provide wireless network, are created. IEEE 802.11 is computer wireless network technology that used in small area, called wireless LAN or Wi-Fi. IEEE 802.11 is a set of standards for implementing wireless local area network (WLAN) computer communication in the 2.4, 3.6 and 5 GHz frequency bands. They are created and maintained by the IEEE LAN/MAN Standards Committee (IEEE 802). AP (Access Point) is installed at cafes and public places providing wireless environment. It is more convenient to use wireless internet, however, It can be seen easily around us and possible to communicate with AP. IEEE 802.11 has many vulnerability, such as packet manipulation and information disclosure, so we should pay more attention when using IEEE 802.11. Therefore this paper developing monitoring system which can find out AP and Stations that connect with it, and capturing AP's information to find out vulnerability. This paper suggests monitoring system which traffic analysis in wireless environment.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.99-108
• /
• 2004

We have designed and implemented a Voice Messenger System(VMS) for sending and receiving voice data in order to measure and analyze the performance of a multimedia data transfer system using PDAs(Personal Digital Assistants) in a fast wireless LAN environment. The VMS has been configured as an infrastructure network by integrating a wireless intra-network based on IEEE 802,11 b standard with a wired network based on Ethernet. A sending time, a receiving time and a round-trip time(RTT) have been measured by varying its pecket size from 256 to 6656 bytes, Besides, we have performed the experiments to see which NIC is more stable between CF and PCMCIA type in such a wireless LAN environment, The results of such experiments show that the NIC with PCMClA type is better than that with CF type from the points of both efficiency and stability. The performance of a notebook computer with the attachment of a wireless NIC that is used as a VMS client is almost constant by varying its packet size when transferring voice data. However, with PDA client, in the case of receiving packets from the VMS server, the performance is the best when the pecket size is 6656 bytes, In addition, in the case of sending packets from PDA client to the VMS server, the performance is the best when the packet size is 4096 bytes. Even with the same pecket size, the time of receiving packets from the VMS server to PDA is longer than the time of sending packets from PDA to the VMS Server, Thus, we conclude that when PDA is used as a client by applying different pecket size when sending and receiving packets should be achieved a better performance over a wireless LAN environment.

• Preventive Nutrition and Food Science
• /
• v.9 no.1
• /
• pp.53-57
• /
• 2004

The purpose of this study was to investigate the effects of green tea catechin on mixed function oxidase system (MFO), lipofuscin contents, carbonyl value, oxidative damage and the antioxidative defense system in lung of microwave exposed rats. Experimental groups were divided to normal group and microwave exposed group. The microwave exposed groups were subdivided into three groups: catechin free diet (MW-0C) group, 0.25% catechin (MW-0.25C) group and 0.5 ％ catechin (MW-0.5C) group according to the levels of dietary catechin supplementation. The rats were irradiated with microwave at frequency of 2.45 GHz for 15 min. Experimental animals were sacrificed at 6th day after microwave irradiation. The contents of cytochrome P$_{450}$ contents in MW-0C group was increased to 95% , compared with normal group. MW-0.25C and MW-0.5C groups were reduced to 16% and 31%, respectively, compared with MW-0C group. The activity of NADPH-cytochrome P$_{450}$ reductase in MW-0C group was increased to 44%, compared with normal group. MW-0.25C and MW-0.5C groups were reduced to 12% and 17％, respectively, compared with MW-0C group. The activity of superoxide dismutase (SOD) in MW-0C group was decreased to 21 ％, compared with normal group. MW-0.25C and MW-0.5C group were significantly (p < 0.05) increased, compared with MW-0C group. The activity of glutathione peroxidase (GSHpx) in MW-0C group was significantly decreased, compared with normal group. MW-0.25C and MW-0.5C groups were recovered to the level of normal group. The thiobarbituric acid reactive substances (TBARS) content in MW-0C group was increased to 34 ％, compared with normal group. Catechin supplementation groups were maintained the level of normal group. The levels of caybonyl value in MW-0C group was increased to 21 ％, compared with normal group. MW-0.25C and MW-0.5C groups were reduced to 14% and 12%, respectively, compared with MW-0C group. The lipofuscin contents in MW-0C group were increased to 23.4 ％, compared with normal group. That of MW-0.5C group was significantly reduced, compared with MW-0C group. In conclusion, MFO system was activated and the formation of oxidized protein, lipofuscin was increased and antioxidative defense system was weakened of lung tissue in microwave exposed rats, thus oxidative damage was increased. But it was rapidly recovered to normal level by green tea catechin supplementation.n.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.60.3-61
• /
• 2021

The Korean VLBI Network (KVN) consists of three 21m radio telescopes installed in Seoul, Ulsan, and Jeju Island with the world's first 4-channel receiver that can observe four different frequencies (e.g., 22, 43, 86, 129 GHz) simultaneously. This receiving system of KVN is particularly effective in millimeter-wavelength VLBI (mm-VLBI) observations by compensating fast atmospheric fluctuations effectively. This technology is now being enhanced with a compact triple-band receiver, becoming the world standard for a mm-VLBI system. In 2020, KVN supported 54 observing programs (KVN: 28, EAVN: 26) including the 2nd KVN Key Science Program (KSP) which supports 8Gbps data recording rate and the East Asian VLBI Network (EAVN) programs. KVN also participated in the European VLBI Network (EVN) and GMVA (Global Millimeter VLBI Array) sessions regularly. Here, we report current status and future propsects of KVN.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.55-79
• /
• 2013

In this paper, we propose a hybrid genetic algorithm (HGA) approach to effectively solve the reverse logistics network with centralized centers (RLNCC). For the proposed HGA approach, genetic algorithm (GA) is used as a main algorithm. For implementing GA, a new bit-string representation scheme using 0 and 1 values is suggested, which can easily make initial population of GA. As genetic operators, the elitist strategy in enlarged sampling space developed by Gen and Chang (1997), a new two-point crossover operator, and a new random mutation operator are used for selection, crossover and mutation, respectively. For hybrid concept of GA, an iterative hill climbing method (IHCM) developed by Michalewicz (1994) is inserted into HGA search loop. The IHCM is one of local search techniques and precisely explores the space converged by GA search. The RLNCC is composed of collection centers, remanufacturing centers, redistribution centers, and secondary markets in reverse logistics networks. Of the centers and secondary markets, only one collection center, remanufacturing center, redistribution center, and secondary market should be opened in reverse logistics networks. Some assumptions are considered for effectively implementing the RLNCC The RLNCC is represented by a mixed integer programming (MIP) model using indexes, parameters and decision variables. The objective function of the MIP model is to minimize the total cost which is consisted of transportation cost, fixed cost, and handling cost. The transportation cost is obtained by transporting the returned products between each centers and secondary markets. The fixed cost is calculated by opening or closing decision at each center and secondary markets. That is, if there are three collection centers (the opening costs of collection center 1 2, and 3 are 10.5, 12.1, 8.9, respectively), and the collection center 1 is opened and the remainders are all closed, then the fixed cost is 10.5. The handling cost means the cost of treating the products returned from customers at each center and secondary markets which are opened at each RLNCC stage. The RLNCC is solved by the proposed HGA approach. In numerical experiment, the proposed HGA and a conventional competing approach is compared with each other using various measures of performance. For the conventional competing approach, the GA approach by Yun (2013) is used. The GA approach has not any local search technique such as the IHCM proposed the HGA approach. As measures of performance, CPU time, optimal solution, and optimal setting are used. Two types of the RLNCC with different numbers of customers, collection centers, remanufacturing centers, redistribution centers and secondary markets are presented for comparing the performances of the HGA and GA approaches. The MIP models using the two types of the RLNCC are programmed by Visual Basic Version 6.0, and the computer implementing environment is the IBM compatible PC with 3.06Ghz CPU speed and 1GB RAM on Windows XP. The parameters used in the HGA and GA approaches are that the total number of generations is 10,000, population size 20, crossover rate 0.5, mutation rate 0.1, and the search range for the IHCM is 2.0. Total 20 iterations are made for eliminating the randomness of the searches of the HGA and GA approaches. With performance comparisons, network representations by opening/closing decision, and convergence processes using two types of the RLNCCs, the experimental result shows that the HGA has significantly better performance in terms of the optimal solution than the GA, though the GA is slightly quicker than the HGA in terms of the CPU time. Finally, it has been proved that the proposed HGA approach is more efficient than conventional GA approach in two types of the RLNCC since the former has a GA search process as well as a local search process for additional search scheme, while the latter has a GA search process alone. For a future study, much more large-sized RLNCCs will be tested for robustness of our approach.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.518-527
• /
• 2014

Our society is changed and diversified rapidly and such tendency is accelerated day after day and has made a lot of problems in the many fields. The important thing we have to recognize is such tendency has a bad effect recently on the safety system in Korea. So it is time to enhance the national safety system and moreover recently Sewol-ho(passenger ship) went down in the sea, it made people remind the importance of national safety system. With this incident, Korean government decided to establish the national safety communication network against the disaster. At this time, I will propose several ideas about the national safety communication network. 1. It must to be established an unified network to contact people who is on a disaster site anytime and anywhere. This is most important element on all disaster sites. 2. PS-LTE technology must to be adopted to the network because it has many advantages including various multimedia services compared to the TETRA in the past. 3. 700MHz is the most efficient band for the network because it has wide cell sites coverage compared to 1.8GHz. 4. Satellite communication system is needed to the network for back-up. 5. It will be effective to adopt Social Media to the communication network system like a Twitter or Facebook for sharing many kinds of information and notifying people of warning message. 6. It can make the network more useful to introduce the latest technology like a sensor network. And Korean government has to improve the system related to the disaster including law and operating organization.