• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.249-255
• /
• 2013

대형 냉장고의 경우 내부구조가 복잡하고 냉장고 문을 열고 닫을 때 냉장고 내부에 온도편차가 발생하며, 또한 진동에 의한 흔들림이 발생하게 된다. 이러한 다양한 원인에 의하여 간헐적으로 부품간 마찰에 의한 이상소음이 발생하기도 한다. 따라서 본 연구에서는 이러한 이상소음의 원인과 메커니즘을 실험적으로 분석하고 이것을 줄일 수 있는 가능성에 대하여 제안하고자 한다. 이상 소음을 구현하기 위한 실험장치를 구성하고 냉장고 문의 열림과 닫힘에서 발생되는 변형량 분석과 온도 변화에 따른 내부 압력변화를 측정하여 소음발생의 주요원인에 대하여 분석하였다. 또한 설계초기 단계에서 적용이 가능한 소음저감 방법론을 제안하였다.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.37-43
• /
• 2019

This study conducted a research as to condensation heat transfer friction loss headby using three types of flat micro multi-channel tubes with different processing of micro-fin and number of channels inside the pipes and different sizes of appearances. In addition, identical studies were conducted by using smoothing circular tubes with 5mm external diameter to study heat enhancement factor and pressure drop penalty factor. 1) The friction head loss showed an increase as the vapor quality and mass flux increased. In case of saturation temperature, it shows an increase as it gets lower. These factors are the reason occurring as the lower the saturation temperature is, the higher the density of refrigerant vapor gets. The influence of heat flux is similar as the dryness is low, but as it gets higher, it lowers in heat flux, and as the high temperature of high heat flux, it is a factor that occurs as the density gets lower. 2) RMS error of the in case of friction head loss, it showed to be predicted as 0.45~0.67 by Chisholm, Friedel, Lockhart and Martinelli. 3) As forfriction head loss penalty factor, the smaller the aspect ratio is, the larger the penalty factor gets, and as for the effect of micro-fin, the penalty factor increased because it decreases to the gas fluid the way groove for the refrigerant's flow.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.282-287
• /
• 2014

Objectives: The aim of the present study was to investigate the bond strength of RelyX Unicem (3M) to root canal dentin when used as an endodontic sealer. Materials and Methods: Samples of 24 single-rooted teeth were prepared with Gates Glidden drills and K3 files. After that, the roots were randomly assigned to three experimental groups (n = 8) according to the filling material, (1) AH Plus (Dentsply De Trey GmbH)/Gutta-Percha cone; (2) Epiphany SE (Pentron)/Resilon cone; (3) RelyX Unicem/Gutta-Percha cone. All roots were filled using a single cone technique associated to vertical condensation. After the filling procedures, each tooth was prepared for a push-out bond strenght test by cutting 1 mm-thick root slices. Loading was performed on a universal testing machine at a speed of 0.5 mm/min. One-way analysis of variance and Tukey test for multiple comparisons were used to compare the results among the experimental groups. Results: Epiphany SE/Resilon showed significantly lower push-out bond strength than both AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p < 0.05). There was no significant difference in bond strength between AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p > 0.05). Conclusions: Under the present in vitro conditions, bond strength to root dentin promoted by RelyX Unicem was similar to AH Plus. Epiphany SE/Resilon resulted in lower bond strength values when compared to both materials.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.74-75
• /
• 2000

The past few decades have witnessed the development of very robust technique, known as magneto-optical trap(MOT), for cooling and trapping of neutral atoms using lasers and magnetic fields. This technique can easily produce cooled atoms to a temperature range of nano-kelvin $s^{(1)}$ . These laser cooled and trapped atoms have found applications in various fields, such as ultrahigh resolution spectroscopy, precision atomic clocks, very cold atomic collision physics, Bose-Einstein Condensation, the Atom laser, etc. Particularly, a few isolated atoms of very low temperature are needed in the cavity QED studies in the optical regime. One can obtain such atoms from a MOT using the atomic fountain technique. The widely used technique for atomic fountain is, first to cool and trap the neutral atoms in MOT. And then launch them in the vertical (1, 1, 1) direction with respect to cooling beams, using moving molasses technique. Recently, this technique combined with the cavity-QED has opened an active area of basic research. This way atoms can be strongly coupled to the optical radiation in the cavity and leads to various new effects. Trapping of single atom after separating it from MOT in the high Q-optical cavity is actively initiated presentl $y^{(2.3)}$. This will help to sharpen our understanding of atom-photon interaction at quantum level and may lead to the development of single-atom laser. Our efforts to develop an $^{85}$ Rb-atomic fountain is in progress. (omitted)

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.370-381
• /
• 2002

This study was performed to evaluate the temperature rise on various position of the Buchanan plugger, the peak temperature of plugger's type and the temperature change by its touching time of heat control spling. The heat carrier system 'System B' (Model 1005, Analytic Technologies, USA) and the Buchanan's plug-gers of F, FM, M and ML sizes are used for this study. The temperature was set to 20$0^{\circ}C$ which Dr. Buchanan's "continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. In order to apply heat on the Buchanan's pluggers, the heat control spring was touched for 1, 2, 3, 4 and 5 seconds respectively. The temperature rise on the surface of the pluggers were measured at 0.5 mm intervals from tip to 20 mm length of shank using the infrared thermography (Radiation Thermometer-IR Temper, NEC San-ei Instruments, Ltd, Japan) and TH31-702 Data capture software program (NEC San-ei Instruments, Ltd, Japan). Data were analyzed using a one way ANOVA followed by Duncan's multiple range test and linear regression test. The results as follows. 1. The position at which temperature peaked was approximately at 0.5 mm to 1.5 mm far from the tip of Buchanan's pluggers (p<0.001). The temperature was constantly decreased toward the shank from the tip of it (p<0.001). 2. When the pluggerss were heated over 5 seconds, the peak temperature by time of measurement revealed from 253.3$\pm$10.5$^{\circ}C$ to 192.1$\pm$3.3$^{\circ}C$ in a touch for 1 sec, from 218.6$\pm$5.$0^{\circ}C$ to 179.5$\pm$4.2$^{\circ}C$ in a touch for 2 sec, from 197.5$\pm$3.$0^{\circ}C$ to 167.5$\pm$3.7$^{\circ}C$ in a touch for 3 sec, from 183.7$\pm$2.5$^{\circ}C$ to 159.8$\pm$3.6$^{\circ}C$ in a touch for 4 sec and from 164.9$\pm$2.$0^{\circ}C$ to 158.4$\pm$1.8$^{\circ}C$ in a touch for 5 sec. A touch for 1 sec showed the highest peak temperature, followed by, in descending order, 2 sec, 3 sec, 4 sec. A touch for 5 sec showed the lowest peak temperature (p<0.001). 3. A each type of pluggers showed different peak temperatures. The peak temperature was the highest in F type and followed by, in descending order, M type, ML type. FM type revealed the lowest peak temperature (p<0.001). The results of this study indicated that pluggers are designed to concentrate heat at around its tip, its actual temperature does not correlate well with the temperature which Buchanan's "continuous wave of condensation" technique recommend, and finally a quick touch of heat control spring for 1sec reveals the highest temperature rise.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.204-212
• /
• 2008

본 연구의 목적은 Resilon을 이용한 근관충전시 methacrylate-based root canal sealer와 자기-접착 레진시멘트의 사용에 따른 치근단 미세누출을 비교해 보는 것이다. 70개 단근치를 ProFile NiTi rotary instrument와 GG drill을 이용해 근관성형 하였다. 치근을 4개의 실험군 (n = 15)과 2개의 대조군 (n = 5)으로 분류하여 측방가압법으로 충전하였다 <1군: GP + AH-26, 2군: Resilon + RealSeal primer&sealant, 3군: Resilon + Rely-X Unicem, 4군: Resilon + Biscem> 7일간 1% 메틸렌블루 용액에 침적 후 수직절단하여 치근첨부터 색소의 침투도를 측정하였다. 1 군에서 가장 적은 미세누출값이 측정되었고, 2, 3, 4군간의 통계적 유의성은 없었다. 이번 연구의 결과에 따르면, 자가-접착 레진시멘트는 Resilon을 이용한 근관충전시 sealer로 사용이 가능하리라 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.204-212
• /
• 2008

본 연구의 목적은 Resilon을 이용한 근관충전시 methacrylate-based root canal sealer와 자가-접착 레진시멘트의 사용에 따른 치근단 미세누출을 비교해 보는 것이다. 70개 단근치를 ProFile NiTi rotary instrument와 GG drill을 이용해 근관성형 하였다. 치근을 4개의 실험군 (n = 15)과 2개의 대조군 (n = 5)으로 분류하여 측방가압법으로 충전하였다. <1군: GP + AH-26, 2군: Resilon + RealSeal primer&sealant, 3군: Resilon + Rely-X Unicem, 4군: Resilon + Biscem > 7일간 1% 메틸렌블루 용액에 침적 후 수직절단하여 치근첨부터 색소의 침투도를 측정하였다. 1군에서 가장 적은 미세누출값이 측정되었고, 2, 3, 4군 간의 통계적 유의성은 없었다. 이번 연구의 결과에 따르면, 자가-접착 레진시멘트는 Resilon을 이용한 근관충전시 sealer로 사용이 가능하리라 생각된다.

• 생명과학회지
• /
• 제26권3호
• /
• pp.353-358
• /
• 2016

Thiolase는 두 분자의 acetyl-CoA를 중합하여 acetoacetyl-CoA를 생산하는 효소이다. 우리는 Clostridium butyricum 유래 thiolase (CbTHL)를 대장균에서 발현하고, 대량으로 정제하여 결정화에 성공하였다. 성장된 결정을 이용하여 엑스선회절 데이터를 획득하였으며, 3차원 입체구조를 2.0 Å으로 규명하였다. 전체적인 구조는 C. acetobutylicum 유래 thiolase (CaTHL)와 같은 type II biosynthetic thiolase와 매우 유사하다는 것을 확인하였다. CbTHL 구조를 CaTHL/CoA 복합체구조와 겹치기를 함으로써 활성화 잔기와 기질결합에 관여하는 잔기를 밝혀낼 수 있었다. CbTHL의 활성화부위는 3개의 잘 보존된 잔기인 Cys88, His349, Cys379로 구성되어 있으며, 이들 잔기는 각각, 공유결합친핵체, 일반염기, 2번째 친핵체의 역할을 하는 것으로 보인다. CbTHL에서 기질결합은, β-mercaptoethyamine과 pantothenic acid 부위는 타 thiolase와 매우 유사한 방법으로 안정화 되지만, ADP 부분은 타 thiolase와는 달리 매우 특이적인 잔기들을 사용한다. CbTHL 구조에서 가장 특징적인 것은 본 단백질이 가역적 이황화결합을 매개로 산화환원스위치를 통하여 그 활성을 조절한다는 것이다.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.133-140
• /
• 2008

이 실험의 목적은 Resilon으로 근관충전된 치아에서 자가산부식전처리제에 따른 치근단 미세누출을 평가하고자 함이다. 70개의 단근치를 사용하였고 .04 Taper ProFile을 사용하여 ISO #40까지 근관성형 하였다. 치아는 근관충전 재료와 자가산부식 전처리제에 따라서 15개씩 4개의 실험군과 5개씩 2개의 대조군으로 나누었다. 실험 치아는 치아 장축에 평행하게 잘라내어 염색액의 최대 침투 길이를 측정하였다. 통계분석은 One-way ANOVA test로 분석하였으며 Scheffe test로 사후검정 하였다. 실험결과 자가산부식전처리제를 사용한 2, 3, 4군 사이에서는 통계적으로 유의한 차이를 나타내지 않았다. 그러나 1군과 4군 사이에서는 통계적으로 유의한 차이가 나타났으며 (p < 0.05), 1군에서 가장 적은 치근단 미세누출을 나타냈다. 이 실험 결과에 따르면 Resilon으로 근관충전을 한 치아는 gutta percha와 $AH26^{(R)}$으로 근관충전한 치아와 비교했을 때 더 좋은 치근단 밀폐를 나타내지 않는다는 결론을 얻었으며, Resilon을 사용하여 근관충전을 한 경우에 자가산부식 전처리제의 차이에 따른 치근단 밀폐효과의 차이를 보이지 않는다는 결론을 얻었다.

• 대한한의학원전학회지
• /
• 제4권
• /
• pp.127-157
• /
• 1990

Geum-Won dynasty is the era which totalized the every medical attainments of before Song dynasty and appeared some medical practioners who found new medical theory based upon this, and is important time for various developments of the oriental medical theory. At this time of the era, the representative practioners are called the four noted physician of Geum-Won dynasty. Jang Won-So who influenced the formation of the theory of the four noted physcian of Geum-Won dynasty, originated new theory by joining the theory of "Nae-Gyung" with his own medical experience. The results can be summarized as follows after studying his life and idea of medicine. 1. Jang Won-So, courtesy name is Gyeol-Go, came from Yeog-Joo and it is unknown that when he was born and dead, but he lived in 11C. At 27, after failed in a Jin-Sa examination, he started medical study, and widely spreaded his medical art by healing the Yoo Wan-So's Sang-Han disease. 2. There are many Jang Won-So's writings, such as "Eui-Hag-Gye-Won" which is the condensation of his idea of medicine, "Jin-Joo-Nang" which is greatly contributed to development of Herbology, "Jang-Boo-Pyo-Bon-Han-Yeol-Heo-Sil-Yong-Yag-Sig" which is the sample of Jang-Boo-Byun-Jeung-Lon-Chi, and "Yag-Joo-Nan-Gyung" "Gyeol-Go-Ga-Jin" "Gyeol-Go-Joo-Sug-Hwa-Mag-Gyeol" "Gyeol-Go-Bon-Cho" "San-Yog-Bo-Sang-Bang" which are known do not existing. 3. Jang Won-So's study about Jang-Boo-Byun-Jeung was influenced by "Nae-Gyung" "Jung-Jang-Gyung" "So-A-Yag-Jeung-Jig-Gyeol" etc. and outline by Han-Yeol-Heo-Sil and the change and prognosis of the state of disease can be decided by Saeng-Sa-Yeog-Soon, so he contribute to development of lang-Boo-Byun-Jeung-Lon-Chi of posterity. 4. Jang Won-So succeeded and develope the theory of the herbs of Oh-Jang-Go-Yog-Bo-Sa and about Ki-Mi-Seung-Gang-Boo-Chim etc. appeared on "Nae-Gyung", especially invented such as Kwi-Gyung-Lon, In-Gyeung-Bo-Sa-Seol, Jang Boo-Pyo-Bon-Yag-Sig and he enriched the content of pharmacological theory, so he motivated various development of herbalogical theory. 5. Jang Won-So's idea of On-Yang-Bi-Wi directly influence Lee Go's assertion of Bi-Wi-Lon, idea of Go-Geum-I-Gue-Seol presented theological basis of posterior medical practioners formation of prescription, so the way of drug usage greatly developed. 6. Jang Won-So's theory of the lang-Boo-Byun-Jeung and herbology directly influenced to Lee Go, Wang Ho-Go, Na Chen-Ik, lang Byeok etc. so he became the father of Yeog-Soo class and indirectly influenced to Seol Gi, Jo Hen-Ga, lang Gae-Bin, Lee Jung-Jae etc. of Myeng dynasty, so the On-Bo class has been formed. Like this, because, his idea of medicine developed at various aspect and greatly influenced to posterity, Lee Si-Jin said "Since the emergency of "Nae-Gyung", Jang Won-So is the only man who greatly enhance medical principle.", so it is clear that this is not unfounded expression at all.