• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1660-1668
• /
• 2008

The WiBro was adopted to the 3G international standard. By the change of specification from Wave 1 to Wave 2, MIMO technology is applied in order to increase the speed of downlink. By MIMO the RF part of WiBro base station is increased to 2 Tx paths. Therefore, the size of RF part is bigger and material cost is increased. For reducing these demerits, the RF part which is consisted of PA, LNA, and TDD switch is designed to one complex RF unit. Also, the experimental results of the RF unit have been discussed. Since the complex RF unit is more compact than the RF part of Wave 1 base station, it can be used as the RF part of Wave 2 base station with 2T/2R MIMO.

• Journal of Environmental Science International
• /
• v.28 no.9
• /
• pp.807-811
• /
• 2019

The present study aimed to examine the effects of dietary illite as a feed additive on the Haugh unit and fatty acid profiles of eggs. One hundred and twenty laying hens (48-week-old Hy-line Brown) were randomly assigned to one of the following two treatments: control or 2% illite powder. At 2 and 4 weeks, the Haugh unit values between the control and 2% illite powder groups were not significantly different (p>0.05). In addition, individual fatty acid content at 2 and 4 weeks did not differ between the treatments (p>0.05), except for palmitic (C16:0) and palmitoleic acid (C16:1) content. The addition of 2% illite powder caused no difference between the total saturated and total unsaturated fatty acids at 2 and 4 weeks (p>0.05). In conclusion, the addition of dietary illite at a rate of 2% did not improve the Haugh unit values or fatty acid profiles of eggs.

• Clinical Endoscopy
• /
• v.57 no.2
• /
• pp.274-276
• /
• 2024

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.101-105
• /
• 2011

The purpose of this study was to assess the marginal fit of three-unit bridges produced using LAVA CAD/CAM (computer-aided design/computer-aided manufacturing) system and conventional PFG in vitro. Materials and methods: #11, 13 resin teeth were prepared on dentiform, then duplicated. Twenty resin models were fabricated, ten for PFG 3-unit bridges and ten for LAVA 3-unit bridges. Each bridge was cemented on the resin model. Marginal discrepancy was measured with stereoscopic microscope (Nikon DS-Fi 1, Nikon, Japan) at a magnification of ${\times}75$. Independent t-test was done for the statistical analysis. Results: The mean marginal discrepancy values and standard deviations of the PFG bridges was $97.1{\pm}18.7\;{\mu}m$ for incisors, $76.6{\pm}21.8\;{\mu}m$ for canines; that of the LAVA bridges was $90.4{\pm}26.7\;{\mu}m$ for incisor, $110.2{\pm}30.2\;{\mu}m$ for canines. The mean marginal discrepancy between PFG and LAVA for incisor did not show significant difference (P<.05). But for canine, the mean marginal discrepancy of PFG bridges was smaller than that of LAVA bridges (P<.05). Conclusion: The LAVA CAD/CAM 3-unit bridges and the PFG 3-unit bridges showed clinically acceptable marginal discrepancy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.125-137
• /
• 1997

To study the vertical variation of heavy metal and Rare Earth Element (REE) contents in deep-sea sediments, eighteen cores were sampled from the Korea Deep-sea Environmental Study (KODES)-96 area in the C-C zone (Clarion-Clipperton fracture zone), northeast equatorial Pacific. Sediment columns can be divided into three units based on sediment colors and geochemical characters; uppermost Unit I with brown color, middle Unit II with pale brown color and smaller Ni/Cu ratio than the ratio in Unit I, and lowermost Unit III with dark (brown) colors and higher contents of Mn, Ni, Cu, and REEs than those in Unit I and II. Unit II can be divided more into two layers of upper Unit IIa and lower Unit IIb. Unit IIb is characterized by high contents of Cu, 3+REEs (REEs except Ce), smectite, and severely deteriorated fossil tests. Unit III can also be divided into two units; upper Unit IIIa with dark brown color, and lower Unit IIIb with black color and enriched Mn and Fe. The KODES area was located near from the East Pacific Rise (EPR) When Unit III Sediments were deposited, considering the hiatus between Unit II and III (Quaternary-Tertiary boundary) and the spreading rate (10 cm/yr) and direction (north southern west) of the Pacific plate from the EPR. High contents of Mn and Fe in Unit IIIb may be related with hydrothermal influence from the EPR. Meanwhile, Unit IIb (about 2~3 Ma) and Unit III (11~30 Ma) layers were probably formed near (or under) the equatorial high productivity zone, and accordingly received a lot of organic materials. As a result, Cu and 3+REEs, closely associated with organic materials, are enriched in smectite and/or Ca-P composites (fish bone debrise, biogenic apatite) after decomposition and reprecipitation on the sea floor. Higher contents of Cu and 3+REEs in Unit IIb and III are suggested to be the result of abundant supply of organic substances in the equatorial high productivity zone.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.1
• /
• pp.32-42
• /
• 2002

The late Quaternary deposit of Cheonsu Bay, up to 20 m in thickness above the Jurassic granite basement, consists of two sedimentary units: an upper Holocene mud and sandy mud deposit (Unit M1), and a lower late Pleistocene sand and mud deposit (Unit M2; 'Kanweoldo Deposit&apos). Unit M1 is a typical Holocene tidal-flat deposit of Cheonsu Bay, showing a coarsening upward, retrogradational facies trend. This retrograding facies trend is probably due to a relative low sedimentation rate during Holocene transgression. Overlain unconformably by Unit M1, Unit M2 deposit reaches up to 14 m in thickness and is mainly composed of muddy sediment with yellow to gray color. This unit is characterized by a variety of tide-influenced signatures such as rhythmic bedding, flaser bedding, crab burrow fossil, marine dinoflagellate assemblage and authigenic glauconite mineral, indicating very similar depositional environment to those of Unit M1 deposit. It suggests that Unit M2 was probably accumulated under the tidal-flat environment during a pre-Holocene sea-level highstand. In particular, the uppermost 3-4 m of Unit M2 appears to have undergone subaerial exposure and subsequent weathering during the sea-level lowstand after deposition. Therefore, stratigraphic unconformity between Holocene and late Pleistocene sediments is highlighted by the desiccated and weathered surface of Unit M2.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.2 no.2
• /
• pp.39-51
• /
• 1979

In introducing and applying the budget management system, the question of how to establish management structure(skelton) representing budget management responsible unit is significantly related to the degree of accuracy and analysis on the performance measurement of standard work unit. We have the following rational process of establishing performance measurement of budget management System ; 1) Standardization of work method 2) Establishment of management structure 3) Institution of budget management system. Especially, this system is based on a premise of efficiency of objectives management, it is assumed that performance measurement in the standard work unit must be enforced according to the basis and categories of performance evaluation based on the evaluating work unit. Therefore, most of all, the following three detail questions(subjects) are to be determined in order to rationalize these above principles to a maximum possible extent of performance measurement system. First, we established respective performance standard unit with respect to such detailed work unit, performance standard unit of which were accurately applicable directly from using the budget ana objectives account data and their supplementary data of the work measurement techniques. Second, by using the above mentioned question, over all evaluation and suggestion are made based on the study of the recording for each work unit development, budget management and production nit (volume of production) Third, the measurement of performance of budget management system is based on the principle of standard work unit, compared with the standard basis and actual work unit by period and activities unit and calculated percentage effectiveness according to the above procedure. and so evaluated the efficiency of performance measurement on the budget management system.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.102-110
• /
• 2006

The purpose of this study was to find out the spacial characteristics from the $69.42-11.70m^2$ unit plans of the apartment houses in Jeon-ju city, and to check up on the general spacial principles of Korean apartment unit plans. The content analysis method and the survey method were used for this study. The data of apartment unit plans and the questionnaires were collected from apartment offices or real estate agency offices. The data of 157 unit plans and 190 questionnaires were analyzed. The results of this study were as follows; 1) The general spacial principles of Korean apartment unit plans, the tendency of front 3-bay unit plan, the openness of living room, the Anbang with a bathroom and a dressroom, the utility room as a kitchen support space, and the addition of balconies, were showed in those of Jeon-ju city. 2) There was a new tendency, the front room arrangement of Anbang-living room-bedroom was changed into Anbang-living room-bathroom or kitchen, in them. 3) The characteristics of L-DK floor plans that the closeness of DK from exterior space and the interior openness and exterior privacy of L were showed in them. 4) The entrance was needed a intermediate space as a balcony or a former space, in them. These tendencies on unit plans of the apartment houses in Jeon-ju city were followed the general spacial principles of Korean apartment unit plans.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.975-983
• /
• 2020

Since the Fukushima Daiichi accident in 2011, concerns for the safety of multi-unit Nuclear Power Plant (NPP) sites have risen. This is because more than 70% of NPP sites are multi-unit sites that have two or more NPP units and a multi-unit accident occurred for the first time. After this accident, Probability Safety Assessment (PSA) has been considered in many countries as one of the tools to quantitatively assess the safety for multi-unit NPP sites. One of the biggest concerns for a multi-unit accident such as Fukushima is that the consequences (health and economic) will be significantly higher than in the case of a single-unit accident. However, many studies on multi-unit PSA have focused on Level 1 & 2 PSA, and there are many challenges in terms of public acceptance due to various speculations without an engineering background. In this study, two kinds of multi-unit Level 3 PSA for multi-unit site have been carried out. The first case was the estimation of multi-unit risk with conservative assumptions to investigate the margin between multi-unit risk and QHO, and the other was to identify the effect of time delays in releases between NPP units on the same site. Through these two kinds of assessments, we aimed at investigating the level of multi-unit risk and understanding the characteristics of risk in a multiunit context.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.26-29
• /
• 1965

1. The purpose of this study was to find out the best sampling form and sampling unit in forest survey. 2. The value of small sampling unit was over estimated in comparison with that of large sampling unit. 3. The value of circular form was over estimated in comparison with that of the others. 4. The smallest unit for estimation in area sampling were as follows. a) 0.06 ha. in the rectangular plot. b) 0.08 ha. in the square plot. c) 0.10 ha. in the circular plot. 5. Conclusion was as follows. The best sampling unit was 0.06 hectoare in the rectangular plot, which was most economic above all and gave preferable result for in the forest survey.