• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.5
• /
• pp.422-430
• /
• 2014

This study proposes a small-signal model and control design for a two-stage DC-DC-AC converter to investigate its dynamic characteristics in relation to battery energy storage system. When the circuit analysis of the two-stage DC-DC-AC converter is attempted simultaneously, the mathematical procedure of deriving the dynamic equation is complex and difficult. The main idea of modeling the two-stage DC-DC-AC converter states that this topology is separated into a bidirectional DC-DC converter and a single-phase inverter with an equivalent current source corresponding to that of the inverter or converter. The dynamic equations for the separated converter and inverter are then derived using the state-space averaging technique. The procedures of building the small-signal model of the two-stage DC-DC-AC converter are described in detail. Based on the derived small-signal model, the individual controllers are designed through a frequency-domain analysis. The simulation and experimental results verify the validity of the proposed modeling approach and controller design.

• The Korean Journal of Applied Statistics
• /
• v.28 no.1
• /
• pp.93-102
• /
• 2015

The D-optimal design for the nonlinear model typically depends on the unknown parameters to be estimated. Therefore, it is strongly recommended in literature to use a sequential experimental design for estimating the parameters. In this paper two stage experimental design is discussed under many different circumstances including estimating parameters. The method is so universal to be applied to any mixture of objectives for any model including linear model. A hybrid approach is suggested to handle more than 2 objectives in two-stage experimental design. The design is discussed in approximate design framework.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.132-139
• /
• 2018

The photosynthetic rate is an indicator of the growth state and growth rate of crops and is an important factor in constructing efficient production systems. The objective of this study was to develop a canopy photosynthetic rate model of romaine lettuce using the three variables of $CO_2$ concentration, light intensity, and growth stage. The canopy photosynthetic rates of the lettuce were measured at five different $CO_2$ concentrations ($600-2,200{\mu}mol{\cdot}mol^{-1}$), five light intensities ($60-340{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$), and four growth stages (5-20 days after transplanting) in three closed acrylic chambers ($1.0{\times}0.8{\times}0.5m$). A simple multiplication model expressed by multiplying three single-variable models and the modified rectangular hyperbola model including photochemical efficiency, carboxylation conductance, and dark respiration, which vary with growth stage, were also considered. In validation, the $R^2$ value was 0.923 in the simple multiplication model, while it was 0.941 in the modified rectangular hyperbola model. The modified rectangular hyperbola model appeared to be more appropriate than the simple multiplication model in expressing canopy photosynthetic rates. The model developed in this study will contribute to the determination of an optimal $CO_2$ concentration and light intensity with the growth stage of lettuce in plant factories.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.823-835
• /
• 2019

Purpose: This study deals with a production planning and scheduling problem to minimize the total weighted tardiness on hybrid flow shop with sets of non-identical parallel machines on stages, where parallel machines in the set are dedicated to perform specific subsets of jobs and sequence-dependent setup times are also considered. Methods: A two-stage approach, that applies MILP model in the 1st stage and dispatching rules in the 2nd stage, is proposed in this paper. The MILP model is used to assign jobs to a specific machine in order to equalize the workload of the machines at each stage, while new dispatching rules are proposed and applied to sequence jobs in the queue at each stage. Results: The proposed two-stage approach was implemented by using a commercial MILP solver and a commercial simulation software and a case study was developed based on the spark plug manufacturing process, which is an automotive component, and verified using the company's actual production history. The computational experiment shows that it can reduce the tardiness when used in conjunction with the dispatching rule. Conclusion: This proposed two-stage approach can be used for HFS systems with dedicated machines, which can be evaluated in terms of tardiness and makespan. The method is expected to be used for the aggregated production planning or shop floor-level production scheduling.

• Journal of Animal Science and Technology
• /
• v.52 no.6
• /
• pp.467-473
• /
• 2010

A total of 4,323,781 records for informal 16 primary linear descriptive traits of dairy cows in Holstein breed from 1988 to 2007 in USA were analyzed to estimate adjustment factors for lactation number and stage. While all factors in the model were highly significant (P < 0.01), major influences on linear type traits were due to lactation number and stage. The frequencies of lactation number 1 through 6 were 58.6, 22.0, 11.8, 4.8, 2.1, and 0.8%, respectively. Further, the frequencies of lactation stage were 0.7, 76.9, 15.3, 4.9, and 2.1%, respectively, for springing, early, medium, late, and dry. To adjust 16 linear traits (stature, dairy form, strength, body depth, rump width, rump angle, legs rear view, leg set, foot angle, fore udder, rear udder height, rear udder width, udder support, udder depth, and front teat placement), additive and multiplicative adjustment factors of lactation number (lactations 2 to 4) and stage (springing, medium, late and dry) were estimated with the solutions in the generalized linear model, assigning lactation 1 and stage early as base class. Additive adjustment factors of lactation number ranged from -1.23 to 2.908, while multiplicative factors ranged from 0.853 to 2.207. Further, additive and multiplicative adjustment factors for lactation stage ranged from -0.668 to 0.785, and from 0.891 to 1.154. Application of adjustment factors to 20 randomly sampled sub-data sets produced the results that additive adjustment factors for both lactation number and stage reduced more mean square of lactation number and stage over 16 linear traits than any combination of adjustments, and leaded additive adjustment factors for both lactation number and stage as a choice of methods for adjustment of informal 16 primary linear type traits collected by classifiers of AI studs.

• The Korean Journal of Applied Statistics
• /
• v.25 no.3
• /
• pp.447-456
• /
• 2012

For a sensitive survey in which the population is comprised of several clusters with a quantitative attribute, we present an additive quantitative randomized response model by cluster sampling that adapts a two-stage cluster sampling instead of a simple random sample based on Himmelfarb-Edgell's additive quantitative attribute model and Gjestvang-Singh's one. We also derive optimum values for the number of 1st stage clusters and the optimum values of observation units in a 2nd stage cluster under the condition of minimizing the variance given constant cost. We can see that Himmelfarb-Edgell's model is more efficient than Gjestvang-Singh's model under the condition of cluster sampling.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1023-1033
• /
• 2008

The purpose of this study was to segment home-shopper market by using the demographic characteristics. This study enables a better unders landing of home-shoppers and improving the strategy of marketing. The specific objects of this study are as follow: First, it was to exam market segmentations by demographic factors using mixture model. Second, it was to exam shopping orientations of fashion merchandise according to segmentation groups. The data was collected from 637 subjects who had used the home shopping more than one time in a year. The data was analysised through frequencies, factor analysis, ANOVA, Duncan's mutiple range tests with SPSS 12.0 and Mixture model. The results of data are as follows: 1. The result of market segmentation as demographic factor using Mixture model was extracted to 4 market segments called 20's/ unmarried stage, 30's/ children bearing & rearing stage, 40's/ families with children's education stage, 50's/ aging stage. 2. Shopping orientations were extracted to 5 factors called a pleasure oriented, convenience oriented, off-line oriented, human oriented, thrift oriented.

• The Korean Journal of Applied Statistics
• /
• v.11 no.2
• /
• pp.415-421
• /
• 1998

In this paper, we proposed improved unrelated question model which has the benefit of simplicity the Kim et al.'s two-stage unrelated question model(1992). conditions are obtained under which the proposed model is more efficient than the Greenberg et al. model(1971) and Kim et al's two-stage unrelated question model.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.118-133
• /
• 2018

This study investigated the effect a fashion model's self-expression has on stage confidence, commitment, and satisfaction. The differences in stage confidence, commitment and satisfaction were analyzed by comparing the frequency of fashion show experiences. A survey was conducted using convenience sampling of professional male and female fashion models at fashion venues (Dongdaemoon Design Plaza) and model agencies from March 2, 2017 through April 10, 2017. A total of 248 questionnaires were obtained and SPSS 21.0 was used for data analysis. The results of this study are as follows. First, the analysis indicated a fashion model's self-expression factors, including movement, meaning, and individuality, had positively impacted the model's psychological and physical confidence, while acting ability negatively impacted such confidences. Secondly, movement meaning, expressive impulse, and individuality had positive impacts on behavioral commitment. A model's expressive impulse was also found to have a positive impact on cognitive commitment. In addition, acting ability negatively impacted behavioral commitment, while it affected cognitive commitment positively. Third, a high level of psychological and physical confidences about fashion shows, as well as a high level of behavioral and cognitive commitment, had a positive impact on fashion-show satisfaction. There were significant differences in cognitive commitment and fashion-show satisfaction by frequency of fashion show experiences. The findings can be utilized to understand the psychological factors that affect a fashion model's performance in order to increase the model's fashion-show satisfaction. It is also expected to provide useful information to enhance the quality of fashion shows.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.244-253
• /
• 2005

In the initial ship design stage of shipyards, the hull form design, the basic design (compartment modeling and ship calculation), and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system 'EzHULL' and the compartment modeling and ship calculation system 'EzCOM-PART' for developing finally an integrated ship design system. And, in this study, we present an object-oriented hull structural design .system 'EzSTRUCT', which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural parts (or objects) such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slot, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design. Therefore, designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawings in the detailed design and production design stages. In this study, the hull structural design system, which can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.