• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.96-107
• /
• 1996

In case of remote image retrieval via shared network or low speed link in order to make a decision for target image problems such as transmission delay are encountered. In this paper browsing and optimization techniques are proposed for fast retrieval of Image by the multiresolution representation and progressive transmission. The proposed network model was analyzed and evaluated for system's performance improvement. Interactive user-system using several multiresolution representation has shown better performance in transmission delay minimization over the single resolution image retrieval system.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1096-1106
• /
• 2013

This paper presents the control of a Permanent Magnet Electric Variable Transmission (PM-EVT) for Hybrid Electric Vehicles (HEVs). Consisting of two electric machines, the EVT realizes the power split function in an electromagnetic way rather than in a mechanical way. A specific PM-EVT has been designed for Toyota Prius II. The control scheme of the entire vehicle is deduced using the Energetic Macroscopic Representation methodology. The energy management strategy yields local control references. A specific attention is paid for the field weakening for wide speed range. Simulation results are provided to illustrate the EVT modeling and control.

• Journal of Biomedical Engineering Research
• /
• v.9 no.2
• /
• pp.195-210
• /
• 1988

We build up distributed database of medical picture and design and realize H/W & S/W of special image workstation. We build up high speed image transmission system for distributed database and retrieval of various medical pictures in w ard through image transmission system and realize integrated image diagnosis. This system improves medical service by speedy diagnosis and enables more precise diagnosis by integrated image diagnosis through distributed database. In economical view this system curtails huge cost of film processing and transmission, which make medical expense cheaf, because it does not use film. We built up PACS in pediatric hospital of Seoul National University Hopital and tested the system with various medical pictures and showed that speedy integrated image diagnosis is possible.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.150.2-150
• /
• 2001

For pneumatic system control, we need a data transmission system with high speed and reliability for information interchange between main computer and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition, we developed a communication protocol for construction of RS-485 based multi-drop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is ...

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.69-77
• /
• 1996

We analyzed wideband propagation characteristics of a microstrip transmission line based on FR-4 composite substrate using the wideband complex dielectric constant model and the phenomenological loss equivalence method. The loss calculated by constant relative permittivity and loss tangent is greatly overestimatd compared to that calculated by the frequency-dependent complex relative permittivity. This wideband analysis can be helpful to characterize high-speed and high-density transmission lines associated with the wideband dielectric characteristics and shows that the FR-4 composite substrate has high potential of high frequency circuit applications in terms o fthe propagation loss.

• Applied Microscopy
• /
• v.46 no.3
• /
• pp.167-169
• /
• 2016

Solder/electroless nickel immersion gold (ENIG) joint sample which is comprised of dissimilar materials with different mechanical properties has limited the level of success in preparing thin samples for transmission electron microscopy (TEM). This short technical note reports the operation parameters for ultramicrotomy of solder joint sample and TEM analysis results. The solder joint sample was successfully sliced to 50~70 nm thick lamellae at slicing speed of 0.8~1.2 mm/s using a boat-type $45^{\circ}$ diamond knife. Ultramicrotomy can be applied as a routine sample preparation technique for TEM analysis of solder joints.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.111-119
• /
• 1997

The operating characteristics of the check valve in the clutch piston of an automatic transmission have a great effect on the shifting performance. This paper addresses the modeling, dynamic analysis, and optimization of the check valve. It was found that the vortex causes a pressure drop, which is related to the rotating speed of the clutch piston, oil volume discharged from the check valve, and valve geometry. Maximizing the oil volume discharged, geometry of the check valve is optimized. The results can be used to design an improved check valve which provides a suitable oil pressure curves for achieving smoother shifting.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.69-83
• /
• 2002

This research attempts on plate making for gravure. Direct Hard Dot Method, Helio Kliso Graph, and Laser TB Dot; these three method are the most popular in Korea. For examining ink transmission, three plates were made in the above three different way for the same manuscript and were printed under the same condition. After printing speed was also varied into 150line/inch, 175line/inch, and 200line/inch, ink transmission was examined too. After printing the same manuscript with the above three method then the researcher examined level of ink transmission. Printing lines shows that Laser TB Dot Method and Direct Hard Dot Method were favorable level, while there was big differences of state of Helio Kliso Graph plate.

• Wind and Structures
• /
• v.7 no.5
• /
• pp.345-357
• /
• 2004

In the 1990s, four strong typhoons hit the Kyushu area of Japan and inflicted severe damage on power transmission facilities, houses, and so on. Maximum gust speeds exceeding 60 m/s were recorded in central Kyushu. Although the wind speeds were very high, the gust factors were over 2.0. No meteorological stations are located in mountainous areas, creating a deficiency of meteorological station data in the area where the towers were damaged. Since 1995 the authors have operated a network for wind measurement, NeWMeK, that measures wind speed and direction, covering these mountainous areas, segmenting the Kyushu area into high density arrays. Maximum gusts exceeding 70 m/s were measured at several NeWMeK sites when Typhoon Bart (1999) approached. The gust factors varied widely in southerly winds. The mean wind speeds increased due to effects of the local terrain, thus further increasing gust speeds.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.247-249
• /
• 2006

In the development of a new wireless communications system, a versatile and accurate radio channel for indoor communications is needed. In particular, the investigation of radio transmission into buildings is very important. In this letter, we present an improved three-dimensional electromagnetic wave propagation prediction model for indoor wireless communications that takes into consideration building penetration loss. A ray tracing technique based on an image method is also employed in this study. Three-dimensional models can predict any complex indoor environment composed of arbitrarily shaped walls. A speed-up algorithm, which is a modified deterministic ray tube method, is also introduced for efficient prediction and computation.