• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.418-418
• /
• 2008

The electrochemical etching of silicon in HF-based solutions is known to form various types of porous structures. Porous structures are generally classified into three categories according to pore sizes: micropore (below 2 nm in size), mesopore (2 ~ 50 nm), and macropore (above 50 nm). Recently, the formation of macropores has attracted increasing interest because of their promising characteristics for an wide scope of applications such as microelectromechanical systems (MEMS), chemical sensors, biotechnology, photonic crystals, and photovoltaic application. One of the promising applications of macropores is in the field of MEMS. Anisotropic etching is essential step for fabrication of MEMS. Conventional wet etching has advantages such as low processing cost and high throughput, but it is unsuitable to fabricate high-aspect-ratio structures with vertical sidewalls due to its inherent etching characteristics along certain crystal orientations. Reactive ion dry etching is another technique of anisotropic etching. This has excellent ability to fabricate high-aspect-ratio structures with vertical sidewalls and high accuracy. However, its high processing cost is one of the bottlenecks for widely successful commercialization of MEMS. In contrast, by using electrochemical etching method together with pre-patterning by lithographic step, regular macropore arrays with very high-aspect-ratio up to 250 can be obtained. The formed macropores have very smooth surface and side, unlike deep reactive ion etching where surfaces are damaged and wavy. Especially, to make vertical microwire or nanowire arrays (aspect ratio = over 1:100) on silicon wafer with top-down photolithography, it is very difficult to fabricate them with conventional dry etching. The electrochemical etching is the most proper candidate to do it. The pillar structures are demonstrated for n-type silicon and the formation mechanism is well explained, while such a experimental results are few for p-type silicon. In this report, In order to understand the roles played by the kinds of etching solution and mask patterns in the formation of microwire arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, dimethyl sulfoxide (DMSO), iso-propanol, and mixtures of HF with water on the structure formation on monocrystalline p-type silicon with a resistivity with 10 ~ 20 $\Omega{\cdot}cm$. The different morphological results are presented according to mask patterns and etching solutions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.848-856
• /
• 2017

This study aimed to investigate the effect of rice nuruk prepared from rice with different degrees of milling (0, 10, 30, 50, and 70%) on physicochemical qualities of yakju. The results indicated significant differences in the qualities of yakju prepared using rice nuruk from rice with different degrees of milling. Specially, pH, amino acidity, brownness, b value, and color difference were significantly reduced as the degrees of milling increased, whereas contents of alcohol and volatile acid, reducing sugar, and L value were increased. Malic acid, succinic acid, and lactic acid were the main organic acids in yakju, and there were significant differences among the treatments in malic acid, lactic acid. However, there was no tendency according to different degrees of milling. In addition, contents of total free amino acids and nitrogen compounds showed no tendency according to degrees of milling, whereas the content of aspartic acid showed a tendency to decrease significantly. The content of 2-phenyl alcohol in the volatile flavor components showed a tendency to increase significantly with higher degree of milling of rice nuruk, whereas contents of n-propanol and iso-amyl alcohol tended to decrease significantly.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.889-899
• /
• 2017

To investigate the quality characteristics of domestic $ros{\acute{e}}$ wines marketed in Korea, 11 kinds of wines were purchased at the Korea Wine Festival in 2016. The color, physiological activity, aroma component and sensory evaluations were conducted. The hue value of $ros{\acute{e}}$ wines ranged from 0.592 to 1.990, with the Ro7 of Delaware having the highest value. The brightness of $ros{\acute{e}}$ wines ranged from 42.96 to 94.99, the redness from 3.20 to 59.37, and the yellowness from 8.43 to 24.83. Of the 11 $ros{\acute{e}}$ wines evaluated, 1 was a dry wine and 10 were sweet wines. The average sugar content of the sweet wines was 73.89 mg/mL. Among the organic acid contents, malic acid ranged from 0.214 to 2.903 mg/mL, and lactic acid content ranged from 0 to 3.423 mg/mL. Malolactic fermentation differed, depending on the source. The total polyphenol content of $ros{\acute{e}}$ wines ranged from 50.55 to 99.55 mg%, the anthocyanin content was 2.12 to 213.30 mg/L, and the DPPH radical scavenging activity of $ros{\acute{e}}$ wines was between 73.75 to 90.41%. A total of 41 volatile components were detected, including 7 alcohols, 22 esters, 4 terpenes, 3 acids and 5 other compounds. Of these, 9 compounds had odor activity value(OAV) greater than 1; these were identified as 1-propanol (alcohol, pungent), 3-methyl-1-butanol (harsh, nail polish), ethyl butanoate (strawberry, lactic), isopentyl acetate (fresh, banana), ethyl hexanoate (green apple, fruity), ethyl octanoate (pineapple, pear, floral), ethyl decanoate (fruity, fatty, pleasant), linalool (flower, lavender) and limonene (lemone, orange). As a result of the sensory evaluation, the Ro5 wine made from Campbell Early grape, and having a good color, flavor and taste, was the most preferred.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.2012-2018
• /
• 2013

The objective of this research was to investigate the quality characteristics of the spirits by different distillation and filtrations. The contents of alcohol, total acids, and amino acids in rice mash were 15%, 0.25 g/100 mL, and 0.15 g/100 mL, respectively. The soluble content was $10^{\circ}Brix$, and pH was 4.6 in the rice mash. Lactic acid was the most prominent organic acid found in rice mash. The rice spirit distilled by a multi stage distiller showed the highest amounts of aroma compounds, such as fusel oil and esters. However, the filtration did not affect the amounts of total aroma compounds. It is suggested that a multi stage distiller may influence taste and flavor positively by enhancing the aroma and removing the impurities in rice spirits.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.581-587
• /
• 2005

In order to obtain a highly purified p-dioxanone (PDX) as monomer of biodegradable polymer, suitable solvent must be selected. The selection was based on the solubility of impurities, and partial layer melt crystallization were carried out under the presence of solvent. The solubility of PDX in various solvents such as ethyl acetate, tetrahydrofuran, acetone, alcohols (methanol, ethanol, 1-propanol, 1-butanol and 1-pentanol) were measured over the temperature range of $-10{\sim}15^{\circ}C$. As solubility parameters, the mixing and dissolution enthalpy between the PDX and the solvents was studied based on empirical equations and the regular solution theory. The solubility and the temperature dependency of the solubility with the solvents of acetone, ethylacetate, and tetrahydrofuran of PDX were shown to have relatively high values compared to the alcohol type solvents. Also, in same alcohols, the smaller molecules and higher polarity gave higher solvency. In partial layer melt crystallization, small amount of ethylacetate selectively dissolved impurities and gave highly purified p-dioxanone, over 99.9% purity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.326-338
• /
• 2021

Ultra-performance liquid chromatography (UPLC) was used to assess the hordein protein fraction of malting barley. C-hordeins (barley prolamins) were extracted with 70% ethanol (EtOH) and 55% isopropyl alcohol (IPA, 2-propanol), and B-hordeins were extracted with the same alcohols in 1.0% dithiothreitol (DTT). High molecular weight (HMW) prolamins (D-hordeins) were extracted with 50% IPA with 1M Tris-HCl (pH 8.0). The same protein patterns were observed in both the experimental extraction solutions (EtOH and IPA). However, the patterns of hordein, extracted with EtOH and IPA containing 1.0% DTT, differed slightly. C- and B-hordeins extracted from those solutions were analyzed. Twenty-six malting barley varieties developed in Korea were analyzed using UPLC. The varieties were divided into seven groups according to hordein patterns of retention time 16 min to 18 min, and 20 varieties showed unique patterns.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.485-494
• /
• 2000

According to the worldwide interest in controlling $CO_2$ which contributes to green house effect. new techniques of reducing $CO_2$ are under development. We have developed new technique for reducing $CO_2$. In low $CO_2$ concentration. the chemical absorption method is useful. In this study. the kinetics of the reaction between $CO_2$ and the sterically hindered amine solution with piperazine. have been investigated from measurements of the rate of absorption of $CO_2$ in the stirred vessel that has a horizontal liquid-gas interface, in the temperature range $30{\sim}70^{\circ}C$. The experiments were carried out in the range 10.130~20.260 kPa of partial pressure of $CO_2$, and in aqueous $2.0kmol/m^3$ AMP solution with $0{\sim}0.4kmol/m^3$ piperazine The experimental results are as follows: 1) The absorption rate of $CO_2$ into aqueous AMP + piperazine solution is gett ng faster than that of aqueous AMP absorbents with temperature. Because the activation energy of piperazine 57.147 kJ/mol is higher than that of AMP 41.7kJ/mol. therefore the effect of piperazine on absorption rate increases with temperature. 2) Compared with aqueous AMP solution. the absorption rate of $CO_2$ into AMP + piperazine solution increases from 6.33% at $30^{\circ}C$ to 12% at $70^{\circ}C$, so AMP + piperazine solution is thought to be a better than AMP solution, 3) The reaction rate constants of piprazine in aqueous AMP solution with $CO_2$ have been determined as 217.21, 420.46, 707.00 and $3162.167m^3/kmol{\cdot}s$ respectively at 30, 40, 50 and $70^{\circ}C$ but these results are higher than those of Xu which were 186.7. 367.32. 693.01. $2207.65m^3/kmol{\cdot}s$ at 30, 40, 55, $70^{\circ}C$in aqueous MDEA solution. So the regression analysis of the data has led to the following equation In $k_p$ =28.324-6934.7/T.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.565-578
• /
• 1992

It has been suggested that Hg$^{2+}$-promoted reaction of a series of cis-[Co(en)$_2$(L)Cl]$^{2+}$ (en = 1,2-diaminoethane) with L = NH$_3$, NH$_2$CH$_3$, glyOC$_2$H$_5$, glyOCH$_3$, dl-alaOC$_2$H$_5$, NH$_2$CH$_2$CONH$_2$, and NH$_2$CH$_2$CN proceeds by dissociative interchange(I$_d$) mechanism from kinetic data, circular dichroism spectra, analyses of products, and the values of m(Grunwald-Winstein plot) using Y (solvent ionizing power) in aqueous solution and in mixed aqueous-organic solvent. It has been found that chloride replacement by water (aquation) for the series with L = NH$_3$ and NH$_2$CH$_3$ and chelation of ligand L to Co(Ⅲ) for the series with L = glyOC$_2$H$_5$, glyOCH$_3$, dl-alaOC$_2$H$_5$, NH$_2$CH$_2$CONH$_2$, and NH$_2$CH$_2$CN occurs, respectively. The rate constants on Hg$^{2+}$-induced reaction of the series except cis-[Co(en)$_2$(NH$_2$CH$_2$CN)Cl]$^{2+}$ were increased with increasing the contents of ethanol in mixed water-ethanol solvents. In mixed water-30${\%}$ organic solvents, the rate constants of the series except cis-[Co(en)$_2$(NH$_2$CH$_2$CN)Cl]$^{2+}$ have also been measured in the order 30${\%}$ 2-propanol-water > 30${\%}$ ethanol-water > water. However, the rate constants of cis-[Co(en)$_2$(NH$_2$CH$_2$CN)Cl]$^{2+}$ were reversed. The rate constants of the series with L= NH$_3$ and NH$_2$CH$_3$ were related to ligand field parameter (${\Delta}$), but those of the series with L = glyOC$_2$H$_5$, glyOCH$_3$, dl-alaOC$_2$H$_5$, NH$_2$CH$_2$CONH$_2$, NH$_2$CH$_2$CN were not. The reaction between the series and Hg2+ in aqueous media containing NO$_3^-$ has been investigated. The results for the reaction do not alter the mechanism, but the rate only was altered.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.737-744
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties during preparation of Yukwa. Protein content of glutinous rice was decreased during soaking time and acid and pH values were increased while contents of lipid and ash were not changed. Particle size distribution showed thate average particle size of 7 days soaking treatment smaller than those of 3 days and starch damage of glutinous rice flour was increased during soaking time. The major flavor components after soaking were found ethyl ester acetic acid, ethanol, 2-butan -ol, 2-methyl 1-propanol, 1-butanol, 3-methyl 1-butanol and 1-pentanol, propanoic acid. Content of acetic acid and butanoic acid were rapidly increased during soaking time. Results for ratio of storage modulus(G') and loss modulus(G') in glutinous rice flour dough indicated $tan{\delta}$ was increased for a while and decreased as frequency increased. G' value was very similar with G' value after steaming which means rubber-like property while G' and G' value were changed after during storage time. Treatment at $-20^{\circ}C$ had the highest hardness for cutting degree of dough. There was no difference in color value between different water contents. Hardness of Bandegi (sheet) was decreased as water content increased and the highest popping value was obtained at 18% of water contents. Adding 3% soaked bean had higher redness value of Yukwa and lower value in yellowness.