• Applied Biological Chemistry
• /
• v.24 no.1
• /
• pp.59-66
• /
• 1981

Trichoxanthes Kirilowii with high starch-content was investigated to utilize as a food source. The weight and starch content of Trichoxanthes Kirilowii roots increased rapid1y in proporion to the growth period. The seasonal variations of the starch content were $36.5{\sim}48.0%$ (dry basis) from June to December. The chemical properties of natural growth soils of Trichoxanthes Kirilowii contained more organic matter and total nitrogen content than citrus orchard soils, but less mineral; P,K,Ca and Mg. To prepare starch with the plant root, the centrifugal method(3,000 rpm, 20 min) obtained the highest yield. The industrial-scale method, was similar to the processing of sweetpotato starch (tank precipitation method), and was good in quality. The starch granules were mainly spherical with diameters ranging from $5{\sim}16{\mu}$. The density of the starch was 1.535 and amylose content was about 26.7%. The X-ray diffraction pattern showed that the granules were of the B-type. The blue value of starch, amylose and amylopectin was 0.46, 0.80 and 0.18, respectively. The starch contained 0.05% ash, 0.35% crude protein and 34 mg% phosphorus. and had an inital pasting temperature of $63.5^{\circ}C$. The color intensity of the starch which iodine gave rise to absorption maxima at 670nm. The starch paste showed high stability during cold storage at $5^{\circ}C$.

• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.187-194
• /
• 2011

This study analyzed the A1B climate change scenario provided by National Institute of Meteorological Research (NIMR), Korea, to investigate potential climate changes in watersheds of 15 multi-purpose dams in South Korea. The A1B climate change scenario is produced by Regional Climate Model (RCM) with 27 km horizontal grid spacings using a one-way nesting technique with Global Climate Model (GCM). Relative to present climate conditions (1971~ 2000), the modeled 10-year averaged daily temperatures at the watersheds of the 15 multi-purpose dams continuously increased to year 2100, whereas precipitation changes were varied regionally (north, central, and south regions of South Korea). At two watersheds located in Gangwon-province (north region), the modeled temporal variations of precipitation rapidly increased in the 2090's after a slow decrease that had occurred since the 2050's. At seven watersheds in the central region, including Gyeongsangbuk-province to Jeollanam-province, the modeled temporal variations of precipitation increase showed 10-year periodic changes. At six watersheds in the south region, the modeled temporal variations of precipitation increased since the 2070's after a rapid decrease in the 2060's. Compared to the climate conditions of the late of 20th century (1971~2000), the number of rainy days and precipitation intensity increased (3% and 6~12%, respectively) in the late 21st century (2071~2100). The frequency of precipitation events tended to increase with precipitation intensity in all regions. The frequency of heavy precipitation events (>50 mm $d^{-1}$) increased with >100% in the north region, 60~100% in the central region, and 20~60% in the south region.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.221-231
• /
• 2010

A simple extraction method was applied to control four selected cyanobacteria, solitary (SMA) and colonial Microcystis aeruginosa (CMA), and green algae, Scenedesmus quadricauda and Chlorella vulgaris using a domestic plant and mineral. Three kinds of concentrations (1, 5, and 10 mg $L^{-1}$) of three fresh plants Camellia sinensis, Quercus acutissima, and Castanea crenata, three minerals loess, quartz porphyry, and natural zeolite, and plant-mineral composite, totally seven materials were prepared with the simple extraction processes: drying and grinding of material, water-extraction by high temperature-sonication and filtering. Cyanobacteria SMA and CMA (over 60% of control) were effectively inhibited with the low concentration (1 mg $L^{-1}$) of plants Q. acutissima and C. crenata and natural zeolite, while green alga S. quadricauda (below 50% of control) also retarded in growth. Low concentrations (1 mg $L^{-1}$) of C. sinensis effectively increased the growth of C. vulgaris, while loess also induced the algal growth of S. quadricauda. Therefore, our results indicate that crude extract of domestic plants, Q. acutissima and C. crenata can be also useful to control the cyanobacterial bloom in eutrophic lake, whereas C. sinensis and loess may be a good growth factor or useful media for the algal mass culture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.149-158
• /
• 1998

The SAR patterns of biological objects contacted with coaxial waveguide antennal has been investigated, in which the biological object was modeled by a homogeneous and four-layered lossy human body. We derived the finite-difference time-domain(FDTD) algorithm and equation of MUR and generalized perfectly matched layer(GPML) ABCs in cylindrical coordination. The coupling between coaxial waveguide antenna and a biological object was analyzed by use of MUR and GPML ABCs in the FDTD method to obtain the absorbed power patterns in the media. The specific absorption rates (SAR) distribution which was corresponding to the temperature distribution was calculated in each region by use of the steady-state response in the FDTD method. The SAR patterns of the FDTD method using MUR absorbing boundary conditions(ABCs) was compared with those of the FDTD method using GPML ABCs. The comparison exhibits that the penetration depth of the SAR patterns using MUR ABCs is deeper than that of the SAR patterns using GPML ABCs because of loss in free space. However, the spread in the lateral directions of the SAR patterns using GPML ABCs is smaller than of the SAR patterns using MUR ABCs.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.605-612
• /
• 2013

Removal of decay heat from an operating reactor during a prolonged station blackout condition is a big concern for reactor designers, especially after the recent Fukushima accident. In the case of a prolonged station blackout condition, heat removal is possible only by passive means since no pumps or active systems are available. Keeping this in mind, the AHWR has been designed with many passive safety features. One of them is a passive means of removing decay heat with the help of Isolation Condensers (ICs) which are submerged in a big water pool called the Gravity Driven Water Pool (GDWP). The ICs have many tubes in which the steam, generated by the reactor core due to the decay heat, flows and condenses by rejecting the heat into the water pool. After condensation, the condensate falls back into the steam drum of the reactor. The GDWP tank holds a large amount of water, about 8000 $m^3$, which is located at a higher elevation than the steam drum of the reactor in order to promote natural circulation. Due to the recent Fukushima type accidents, it has been a concern to understand and evaluate the capability of the ICs to remove decay heat for a prolonged period without escalating fuel sheath temperature. In view of this, an analysis has been performed for decay heat removal characteristics over several days of an AHWR by ICs. The computer code RELAP5/MOD3.2 was used for this purpose. Results indicate that the ICs can remove the decay heat for more than 10 days without causing any bulk boiling in the GDWP. After that, decay heat can be removed for more than 40 days by boiling off the pool inventory. The pressure inside the containment does not exceed the design pressure even after 10 days by condensation of steam generated from the GDWP on the walls of containment and on the Passive Containment Cooling System (PCCS) tubes. If venting is carried out after this period, the decay heat can be removed for more than 50 days without exceeding the design limits.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.915-922
• /
• 2017

This study aimed in onion production by evaluating cost and labor efficiencies of onion storage methods using either a ton-bag or a wire-steel pallet. New methods using ton-bag and wire-steel pallets were developed and applied to postharvest tasks, such as harvest packaging, transportation, and storage. The storage parameters evaluated for their effect on the logistics of onion production were: working duration, working hours, and cost expenditure. The longitudinal tensile strength of the ton-bag developed in this study was 16% higher than that of the conventional ton-bag. The wire-steel pallet developed in this study had 10% more storage capacity in a low-temperature storage room, and its truck loading capacity was more than doubled compared to that of the conventional steel pallet. There was no difference in the wasting rate during bulk storage between the newly developed wire-steel pallet and the conventional steel pallet, for 500 kg of onions. However, the bulk storage of 1,000 kg of onions using the wire-steel pallet was not found to be suitable, because the wasting rate of onions stored using the wire-pallet was 3.7% higher than that of onions stored using a conventional steel pallet. The time and the total investing costs for the bulk method decreased by 50.1% and 46.1%, respectively, compared to those for conventional harvest. In the bulk storage using the wire-steel pallet, the total storage cost decreased by 28.8%. Thus, it is estimated that we could have saved 18.3 billion won if the wire-steel pallet method about 30% of the total onion production (1,298,749 M/T) in 2016.

• Korean Journal of Environment and Ecology
• /
• v.18 no.2
• /
• pp.191-196
• /
• 2004

Mt. Deogyusan, 1,614m in altitude, is located in the southwest of South Korea. Around Mt. Duckyu, many Korean endemic and rare plants are populated, so it is considered a very important biogeographical area where the temperature zones of northern and southern plants are crossed. Because it is the graceful figure of Mt. Duckyu, it is a common mountain where many tourists visit frequently. Continuous tourist's visit may cause a bad influence on vegetation around the climbing paths. Therefore, weed community around the climbing paths on Mt. Duckyu, where visitors exert a bad influence directly on its community by coming in and out, was surveyed phytosocialogically. Our surveys have been accomplished from July to August, 2003. Weed communities formed around the climbing paths on Mt. Duckyu were divided into several patterns and analysed. They have been divided into 8 communities and 4 subcommunities. Community A: Plantago asiatica community, A-a: Carex bostrychostigma subcommunity, A-b: Artemisia princeps var. orientalis subcommunity, B: Sasa borealis community, B-a: Carex siderosticta subcommunity, B-b: Veratrum parulum subcommunity, C: Rubus crataegifolius community, D: Hosta longipes community, E: Tripterygium regelii community, F: Miscanthus sinensis var. purpurascens community, G: Carex okamotoi community, H: Lespedeza maximowiczii community. The flora surveyed in these communities was constituted of 34 families, 83 genera, 12 varieties, and 92 species. Wild plants such as Plantago asiatica, Artemisia princeps var. orientalis, Rubus crataegifolius, Sasa borealis and Miscanthus sinensis var. purpurascens were mostly light loving plants and higher resistant plants against the stamping pressure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.961-964
• /
• 2008

There are researches in progress on ensuring the safety of the high impact concrete in case of fire which is a current rising social problem and this research institute also developed PFB technology, the explosion preventing technology. PFB technology is to apply POSCO E&C Fire Board, a fireproof board, with an adhesive agent on the construction site, and this technology passed 3-hour fireproof test and this technology was proven from a previous research that the temperature of main root is maintained under $200^{\circ}C$. Therefore, tests on basic contents was performed in this research before the actual construction, with a full scale of wooden prototype to apply PFB technology to actual construction sites and the tests were done on the workability of fireproof board, the adhesive power, the resistance against imprint of wooden nail, the heat conductivity and etc. As the results of these tests, PFB technology was proven to have an excellent workability at a construction site and to be easy for processing and also, this technology was proven to have a great resisting power against imprint of wooden nail. Therefore, this research has confirmed that PFB technology has no problem to be applied on a construction site.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.590-598
• /
• 2004

The preconcentration and determination of trace Cu(II) and Pb(II) on calcium alginate beads in aqueous solution were studied. A calcium alginate beads were prepared by adding an alginic acid to sample solution contained Ca(II). Some following conditions were optimized: the pH of sample solution, amount of alginic acid, and stirring time for effective adsorption; the type and concentration of acid, and sonication time in an ultrasonic vibrator for the perfect de-sorption. A sample solution was prepared with Cu(II) and Pb(II) in DI water. And Ca(II) and ethanol was added into the sample solution. The pH of the final sample solution was controlled with buffer solution. The alginic acid were dispersed in the sample solution by a magnetic stirrer. This mixture was stored in room temperature for 30 min to form a calcium alginate. After the beads were filtered and washed on a membrane filter, the analytes were redissolved from the beads by an ultrasonic vibration of 10 minutes in 1.0M $HNO_3$ solution. The effect of diverse ions on the adsorption of analytes were studied. This procedure was applied for the analysis of two real samples. The recoveries in spiked samples were $90.4{\sim}104.3%$ for analytes.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.