• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.403-404
• /
• 2020

본 논문에서는 단일 2-level 3-leg 전압형 인버터를 사용하여 직렬 연결된 3상 및 단상 표면부착형 영구자석 동기전동기(SPMSM)를 가변속 운전하는 기법을 제안한다. 일반적으로 두 영구자석 동기전동기를 독립적으로 가변속 운전하기 위해서는 각각의 인버터가 필요하지만, 본 논문은 옵셋(Offset) 전압을 사용한 전압 펄스 폭 변조(PWM) 방식으로 인버터를 제어하여 단일 인버터를 사용한 3상 및 단상 전동기 동시 운전이 가능하다. 제안된 방식은 전력용 반도체 소자 수를 줄여 전동기 구동시스템의 가격을 절감시킬 수 있으며, PLECS 시뮬레이션을 통하여 제안된 토폴로지의 유효성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.205-206
• /
• 2014

본 논문에서는 3-레벨 인버터 시스템에서 공통 모드 전압 변동 제거를 위한 새로운 Medium Vector PWM(MVPWM)을 제안한다. 제안된 MVPWM의 특징은 다음과 같다. 1) 스위칭 상태와 관계없이 공통모드 전압은 일정하게 유지된다. 2) 무게 중심좌표계 방법에 의하여 구현되므로 구현이 간단하고 직관적이다. 본 논문에서는 시뮬레이션을 통하여 제안된 MVPWM의 위와 같은 특성을 밝히고 태양광 인버터의 제어에 적합함을 입증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.43-44
• /
• 2015

본 논문에서는 3-레벨 인버터의 공통 모드 전압 변동 제거의 목적으로 사용되는 MVPWM(Medium Vector PWM의 과변조 특성을 분석한다. MVPWM의 과변조 특성은 다음과 같다. 1) 과변조 상태에서도 동일한 공통모드전압을 갖는 7개의 벡터만 선택한다. 2) 진폭변조지수를 증가시킬 때 선형영역에서 비선형영역으로의 천이가 연속적이다. 본 논문에서는 시뮬레이션을 통하여 MVPWM의 위와 같은 과변조 특성을 밝힌다.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.173-178
• /
• 2011

In order to verify the performance of brushless DC (BLDC) motors, the simulation method has been widely used. The current of a BLDC motors flows on two phase windings to obtain a constant torque. However, the freewheeling current caused by the inductance component of a BLDC motor exists at the commutation point so that the current can flow on three phase windings at the same time. Due to the changes of the excited phases, the model equations are frequently changed during BLDC motor drive operation. The model equations can be also changed by the applied switching pattern since the current path in the inverter circuit changes according to switching pattern. A BLDC motor system can utilize various switching patterns for many different purposes. However, such changes of the model equations complicate the simulation procedure. In this paper, the technique to set up model equations is proposed to ease the simulation of a BLDC motor system through an inverter circuit analysis. The proposed technique will be verified using the C language. Although this method does not provide the level of detail obtainable from commercial simulation tools like PSIM or SIMULINK, it can provide an efficient way to quickly compare various conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 2008

Global warming and air pollution have increased the amount $CO_2$ in the atmosphere. In order to decrease the amount of $CO_2$, lots of researches are conducted toward using Hydrogen energy. Because of its high efficiency energy level and environmental friendly features, many companies have researched on developing hydrogen engine system and distributed generation system. Especially, the focus of this research provides the operation method of linear generator for hydrogen fuel combustion linear engine. During an ignition, linear generator is operated by motor to create the initial condition of engine combustion. Once the engine combustion is stabilized, the generator supplies electric power to grid. In order to stabilize the engine, linear generator is required to control mover frequency, direction, and force; Hence the PCS(Power Conversion System) place three H-bridge type inverter stacks in parallel to control phase current independently. As well, by using Back-to-Back method, it can receive electric power from both end.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.131-136
• /
• 2015

We develop the 60 W class hybrid solar LED street lamp controller. The controller is providing power via an inverter in the day with the least solar cell and battery and charging the battery for the ESS, acts as a power failure, the built-in battery. Rated output of the fabricated LED street lamp is 300 W or greater battery capacity 300 Wh, discharge time 10 hr, LED street lamp efficiency showed a very high level of light efficiency by about 127 lm/W. In addition, as a result of light distribution pattern according to the distance and the light intensity measurement will be able to ensure a very high quality, show the constant brightness in the distance from the road lights 6 m is about 35~40 lux in uniformity ratio. The proposed hybrid solar LED street lamp system showed a high energy capacity of approximately 1.5 to 152.7% power generation efficiency than typical conventional solar street lamp.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1523-1534
• /
• 2017

A Current Error Space Phasor (CESP) based hysteresis controller with online computation of the boundary for two-level inverter fed Induction Motor (IM) drives is presented in this paper. The stator voltages estimated along the ${\alpha}$-and ${\beta}$-axes and the orthogonal current error components of the motor are used in the online computation of the hysteresis boundary. All of the inherent benefits of space phasor based hysteresis controllers such as its quick dynamic response and nearby voltage vector switching are present in the proposed scheme with the added benefit of suppressing switching frequency variations. The similarity in the frequency spectrum of the phase voltage obtained at the output of the inverter using the proposed scheme and Bus Clamping Pulse Width Modulation (BCPWM) based drive is justified with the help of extensive MATLAB SIMULINK simulations. The controller is experimentally verified with a three phase, 2.2 kW IM drive for steady state and transient conditions and the obtained results match the simulation results.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.233-238
• /
• 2018

This paper proposes a seamless MPPT operation mode transfer method of photovoltaic system. The photovoltaic system consists of a DC-DC boost converter, a DC-Link, and a 3-level neutral point clamp (NPC) type inverter. The PV voltage fluctuates due to the output characteristics of the solar pane1 depending on the irradiation amount and the temperature. The photovoltaic system requires seamless MPPT mode transfer method that the discontinuity does not occur in order to supply the stable power to system without affecting the fluctuation of the PV voltage. MPPT operation is divided into two modes by the voltage reference. Under the condition that the PV voltage is below 650V, the DC-DC boost converter performs MPPT through duty control based on perturb & observe (P&O) method, and the inverter conducts DC-link voltage and grid current controls in synchronous reference frame. On the other hand, when the PV voltage exceeds above 650V, inverter performs MPPT in accordance with the variation of DC-link voltage control while the converter stops operating. Two MPPT operation modes is smoothly transferred through the proposed method that DC-link voltage or grid current commands are appropriately adjusted from the certain criteria. The feasibility of the MPPT operation mode transfer method is verified using a 10kW solar photovoltaic system, experimental results have good performances that the fluctuation of PV current is reduced to 100%.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.96-105
• /
• 2017

In this paper, a hybrid modular multilevel converter (MMC) topology with an improved nearest level modulation method is proposed for medium-voltage high-power applications. The arm of the proposed topology contains N series connected half-bridge submodules (HBSMs), one full-bridge submodule (FBSM) and an inductor. By exploiting the FBSM, half-level voltages are obtained in the arm voltages. Therefore, an output voltage with a 2N+1 level number can be generated. Moreover, the total level number of the inserted submodules (SMs) is a constant. Thus, there is no pulse voltage across the arm inductors, and the SM capacitor voltage is rated. With the proposed voltage balancing method, the capacitor voltage of the HBSM is twice the voltage of the FBSM, and each IGBT of the FBSM has a relatively low switching frequency and an equalized conduction loss. The capacitor voltage balancing methods of the two kinds of SMs are implemented independently. As a result, the switching frequency of the HBSM is not increased compared to the conventional MMC. In addition, according to a theoretical calculation of the total harmonic distortion of the electromotive force (EMF), the voltage quality with the presented method can be significantly enhanced when the SM number is relatively small. Simulation and experimental results obtained with a MMC-based inverter verify the validity of the developed method.

• 한국통신학회논문지
• /
• 제12권5호
• /
• pp.505-518
• /
• 1987

본 논문은 2레벨 및 3레벨 형태의 펄스폭변조 기법을 해석한 후 이런 두 형태의 펄스폭변조인버터에 대한 제어기로서 사용될 수 있는 다중 프로세서를 설계하였다. 설계된 다중 프로세서 방식은 Supervisory 프로세서가 공용메모리를 통해서 Local 프로세서와 상호 연결되어 있는 계층적인 구성을 도입함으로써 정교한 디지탈제어특성을 보였다. 이런 다중 프로세서 구성을 실현함으로써 시스템의 소프트웨어를 변경시 큰 자유도를 얻을 수 있었고 단일 프로세서구성때보다 소프트웨어를 더욱 간단하게 할 수 있었다.