• Bulletin of the Korean Chemical Society
• /
• 제5권3호
• /
• pp.104-108
• /
• 1984

The self-diffusion experiment of THO was performed across a series of copolymer hydrogel membranes at different temperatures. Copolymer hydrogel membranes were prepared by copolymerizing 2-hydroxyethyl methacrylate (HEMA) and 2-aminoethyl methacrylate (AEMA) in the presence of the solvent and the crosslinker, ethylene glycol dimethacrylate (EGDMA). By changing the crosslinker content and the ratio of HEMA and AEMA monomer, two series of copolymer hydrogel membranes were synthesized. The tagging material was THO and efflux of THO was counted on a Liquid Sc-intillation Counter. The experimental data show that the permeability decreases as the amount of EGDMA and the mole fraction of HEMA increase, and the permeability is proportional to the temperature. The partition coefficient shows a parallel trend with permeability. Using the relationship between viscosity and diffusivity, the viscosity of water within the membrane was obtained. According to the result, the viscosity of watler within the membrane has the same value with those of supercooling water. And we obtained the activation energy of THO for transport in the membrane by using Arrhenius plotting.

• 한국안광학회지
• /
• 제20권4호
• /
• pp.437-443
• /
• 2015

목적: 본 연구는 3-chloropyridine-4-carboxylic acid와 3-fluoropyridine-4-carboxylic acid를 첨가제로 사용하여 소프트 콘택트렌즈 제조 후 물리적 및 광학성 특성을 분석하여 콘택트렌즈 재료로서 활용도를 알아보았다. 방법: 본 실험에서는 소프트 하이드로젤 콘택트렌즈의 주재료인 HEMA (2-hydroxyethyl methacrylate)와 AA(acylic acid), MMA(methacrylic acid) 그리고 개시제인 AIBN(azobisisobutyronitrile), 교차결합제인 EGDMA(ethylene glycol dimethacrylate)를 사용하여 공중합 하였다. 결과: 생성된 고분자의 물리적 특성을 측정한 결과, 굴절률 1.4320~1.4342, 함수율 34.54~37.15%, 접촉각 $57.82{\sim}79.57^{\circ}$, 인장강도 0.2872~0.3608로 각각 나타났고 광학적 특성 측정 결과 가시광선 영역에서는 투과율이 88.8~90.6%로 나타났으며, UV-B 76.8~82.4%, UV-A 84.6~86.6%로 각각 나타났다. 결론: 본 실험 결과 3-chloropyridine-4-carboxylic acid 및 3-fluoropyridine-4-carboxylic acid를 첨가제로 사용하였을 때 고습윤성 및 자외선 차단기능을 가진 콘택트렌즈 재료로 활용될 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제8권2호
• /
• pp.367-371
• /
• 2007

본 연구에서는 극성 monomer인 HEMA와 GMA를 이용하여 PP를 개질한 상용화제를 제조하였고, 이를 이용하여 용융컴파운딩 방법에 의해 PP계 나노복합재료를 제조하였다. 제조한 나노복합재료는 comonomer 도입 유무에 따른 상용화제 효과를 관찰하고자 XRD를 이용하여 분산성을 확인하였고, UTM등을 통하여 기계적 성질을 측정하였다. XRD 분석 결과, comonomer가 도입된 상용화제를 이용하여 제조된 나노복합재료는 Clay의 층간삽입이 개선되어 분산성이 향상됨을 볼 수 있었다. 또한, 기계적 성질 평가 결과 GMA monomer로 개질된 상용화제를 사용하여 제조한 나노복합재료가 굴곡탄성률과 충격강도 측면에서 더 향상된 견과를 보여주었다 Comonomer를 도입하여 제조한 나노복합재료는 comonomer를 도입하지 않은 나노복합재료에 비해서 그라프팅 수율이 향상되었고, 반면에 용융지수가 감소되는 경향을 보였다. 본 연구에서 제조한 comonomer가 도입된 나노복합재료는 monomer와 comonomer의 비율이 1:1인 경우에 가장 향상된 기계적 성질과 분산성을 보임을 확인 할 수 있었다.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.100-106
• /
• 2022

Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.

• 대한화학회지
• /
• 제61권6호
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.199-203
• /
• 2004

Fibrous arsenic (As) adsorbent was synthesized by loading zirconium (Zr) on fibrous phosphoric adsorbent that was directly synthesized by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid on polyethylene-coated polypropylene nonwoven fabric. Zirconium reacted with phosphoric acid grafted in the polyethylene layer. Zirconium density of the resulting adsorbent was 4.1 mmol/g. The breakthrough curve of As(V) adsorption was independent of the flow rate up to $1300\;h^{-1}$ in space velocity. The total capacity of As(V) was 2.0 mmol/g-adsorbent at pH of 2. The adsorbed Zr(IV) could be evaluated by 0.4 M sodium hydroxide solution because negligible Zr(IV) could be found in the eluted solution.

• 한국안광학회지
• /
• 제11권1호
• /
• pp.49-53
• /
• 2006

Diisocynate를 HEMA(2-hydroxyethylmethacrylate)와 DBTDL(Dibutylitin dilaurate) 촉매 하에서 반응시킨 후 다시 고 산소 투과성 특성을 가지는 bis(hydroxyalkyl)terminated poly(dimethylsiloxane)를 반응시켜 Acrylate-PDMS(Polydimethylsiloxane)-Urethane Prepolymer를 합성하였다. HEMA(2-hydroxyethyl-methacrylate)는 중합 가능한 prepolymer를 만들기 위해서 사용하였으며, Urethane의 도입은 탄성이 좋고 산소투과성을 높이기 위해 사용하였다. 이들의 반응은 FT-IR로 확인하였으며, 이 고분자 재료는 고 산소투과성 하이드로 젤 렌즈의 원료로 사용될 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제5권5호
• /
• pp.175-178
• /
• 1984

Two series of membranes have been prepared by postcrosslinking highly syndiotactic and isotactic poly (2-hydroxyethyl methacrylate), P(HEMA). The crosslinker used was hexamethylene diisocyante (HMDIC). The distribution coefficients (K$_{D2}$) of the model solutes such as urea (and thiourea), their derivatives, homologous alcohol series and amide sreies in water-swollen tactic P(HEMA) membranes at $25^{\circ}C$ were mesaured. In addition, the concentration effects of acetamide and butyramid were also measured. On the basis of hydrophobic interaction and the structural factors of tactic P(HEMA) membranes, the hydrophobic adsorption of the solutes in the polymer matrix were discussed. The results showed that the more hydrphobic the solute is, the higher the $K_{D2}$ value is. And the polymer conformation also affects the distribution of solvents.

• 한국염색가공학회지
• /
• 제19권2호
• /
• pp.7-13
• /
• 2007

Photopolymerization of 2-hydroxyethyl methacrylate(HEMA), in the presence of ethyleneglycol dimethacrylate(EGDMA) and 1-Hydroxycyclohexyl phenyl ketone as crosslinker and photoinitiator, respectively, produced crosslinked poly-HEMA hydrogels. The hydrogels were colored by the exhaustion of vinylsul-phone-type reactive dyes. Good colorfastness to laundering was achieved when colored with C.I. Reactive Black 5. We investigated that the effect of coloration on the hydrophilicity and swelling properties of the films. More hydrophilic gel-surfaces were generated with in increase in coloration and crosslinking. Higher surface energy was observed with higher crosslinking level. The more rapid and higher water swellability of poly-HEMA gels after coloration may be resulted from a more opened gel structure by the easier hydration of the hydrophilic sulphonic acid groups of the reacted dyes in water.

• 통합자연과학논문집
• /
• 제13권1호
• /
• pp.13-18
• /
• 2020

This study used cerium iron hydroxide nanoparticle with HEMA (2-hydroxyethyl methacrylate), the cross-linker EGDMA (ethylene glycol dimethacrylate), NVP (N-vinyl-2-pyrrolidone) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Also, the physical properties of the prepared lenses were compared, and their applicability as polymers for ophthalmic materials was experimented. The results of the measurement showed that the UV blocking rate and the wettability increased with the cerium iron hydroxide nanoparticles addition ratio, and the refractive index and water content were not affected. Thus, the produced copolymer is expected to be useful as a functional contact lens material while satisfying the basic physical properties of the hydrogel contact lens.