• 한국의상디자인학회지
• /
• 제13권2호
• /
• pp.103-119
• /
• 2011

This study set out to analyze the solid shapes of knit flared skirts, which are best represented in a 3-dimensional shape for all knit skirts, according to the seamed and seamless production method and to estimate the silhouettes of knit flared skirts based on the results. It also aimed to help with the introduction and spread of seamless weaving by revising and supplementing potential problems and provide findings that would be put to active use as basic data, thus contributing to the development of original knitwear and offering fundamental materials for the development of the knitting industry. A number of experimental knit flared skirts were made according to skirt angle ($90^{\circ}$ and $180^{\circ}$), gauge (7G, 12G, and 15G), and grain (bias, wale, and radial), including 12 kinds of seamed knit flared skirts and 6 kinds of seamless knit flared skirts. Using a three-dimensional shape measurement system, the investigator measured the cross-sectional shapes of their hemlines. The SPSS 12 Version program was used for statistical processing, and descriptive statistics such as mean and standard deviation were used to compare the seamed and seamless knit flared skirts in the measurements (measurement items) of their solid shapes according to the width, gauges, and grain directions. The central grain direction of seamless knit flared skirts was in a radial form and even hemlines, thus presenting a beautiful appearance and solid shape. The 3-dimensional shapes show that seamless knit flared skirts are superior to seamed ones. The research findings are expected to open a door for Korea's knitting industry to quickly respond to small quantity batch production and additional orders.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.495-503
• /
• 2020

This study classified lower body shape according to thigh and waist shape to improve the fit of skinny blue jeans in adult women in their 20s. We analyzed the three-dimensional automatic measurement data, three-dimensional indirect measurement data, and index data using the three-dimensional female (20-29 years old) body scan data provided by Size Korea (6^th Korean Human Dimensional Survey Project). Factor analysis was performed to classify body type. We selected and analyzed 34 items related to thigh shape based on index items, angle items, and protrusion amount items from 99 items; consequently, seven factors were extracted and 82.39% of the total variance was explained. Cluster analysis according to factor analysis classified it into 4 types, and a post-test Duncan test was conducted to classify thigh features according to classified types. As a result, the characteristics of lower body shape according to the thigh types of women in their 20s are as follows. Lower Body Type 1 is shape with a more prominent belly and less prominent thighs. Lower Body Type 2 is a slender body figure with larger hips. Lower Body Type 3 has more prominent thighs compared to the waist and belly. Lower Body Type 4 has both a prominent belly and prominent thighs.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2012

Obstacle detection is much studied by using sensors such as laser, vision, radar and ultrasonic in path planning for UGV(Unmanned Ground Vehicle), but not much reported about its characterization. In this paper not only an obstacle classification method using 2-dimensional LMS(Laser Measurement System) but also a decision making method whether to avoid or traverse the obstacle is proposed. The basic idea of decision making is to classify the characteristics by 2D laser scanned data and intensity data. Roughness features are obtained by range data using a simple linear regression model. The standard deviations of roughness and intensity data are used as measures for decision making by comparing with those of reference data. The obstacle classification and decision making for the UGV can facilitate a short path to the target position and the survivability of the robot.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.19-25
• /
• 2004

Pitch measurements of 150 nm one-dimensional grating standards were carried out using a contact mode atomic force microscopy with a high resolution three-axis laser interferometer. This measurement technique was named as the 'nano-metrological AFM'. In the nano-metrological AFM, three laser interferometers were aligned precisely to the end of an AFM tip. Laser sources of the three-axis laser interferometer in the nano-metrological AFM were calibrated with an I$_2$ stabilized He-Ne laser at a wavelength of 633 nm. Therefore, the Abbe error was minimized and the result of the pitch measurement using the nano-metrological AFM could be used to directly measure the length standard. The uncertainty in the pitch measurement was estimated in accordance with the Guide to the Expression of Uncertainty in Measurement (GUM). The primary source of uncertainty in the pitch-measurements was derived from the repeatability of the pitch-measurements, and its value was about 0.186 nm. The average pitch value was 146.65 nm and the combined standard uncertainty was less than 0.262 nm. It is suggested that the metrological AFM is a useful tool for the nano-metrological standard calibration.

• 한국음향학회지
• /
• 제37권2호
• /
• pp.99-109
• /
• 2018

현존하는 진동 측정 센서는 정밀도 면에서는 대부분의 진동을 측정하기에 충분하나, 센서 한 개로 하나의 지점이나 방향에 한정하여 측정할 수밖에 없다는 단점을 갖고 있다. 반면 카메라의 경우, 정밀도나 측정 가능한 주파수 영역의 면에서는 다소 불리하지만, 한 번에 광범위한 영역의 진동을 측정할 수 있고 가격 면에서 유리하며 다자유도의 진동을 동시에 측정할 수 있다는 큰 장점을 갖고 있다. 본 연구에서는 저가의 머신 비전 카메라가 진동 측정 센서로서 어느 정도의 오차 범위 내에서 진동을 측정할 수 있는지 알아본 후, 실제 외팔보의 진동을 측정하였다. 카메라의 2차원 평면 이미지는 두 방향의 직선 운동과 한 방향의 회전 운동을 나타낼 수 있다. 먼저 단일 점의 진동을 카메라로 측정하고, LDV(Laser Doppler Vibrometer) 측정을 기준으로 한 카메라 측정의 오차를 실험적으로 교정하였다. 다음으로 다중점의 진동을 한 번에 측정하여 회전 진동과 외팔보 전체 형상의 진동을 측정하였다. 외팔보 전체 형상 진동은 주파수와 시간 영역 모두에 대하여 분석하였다.

• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.362-373
• /
• 2002

A stereoscopic PIV (SPIV) measurement system based on the translation configuration was developed and applied to the flow behind a forward-swept axial-fan. Measurement of three orthogonal velocity components is essential for flow analysis of three-dimensional flows such as flow around a fan or propeller. In this study, the translation configuration was adopted to calculate the out-of-plane velocity component from 2-D PIV data obtained from two CCD cameras. The error caused by the out-of-plane motion was estimated by direct comparison of the 2-D PIV and 3-D SPIV results that measured from the particle images captured simultaneously. The comparison shows that the error ratio is relatively high in the region of higher out-of-plane motion near the axial fan blade. The turbulence intensity measured by the 2-D PIV method is bigger by about 5.8% in maximum compared with that of the 3-D SPIV method. The phase-averaged velocity field results show that the wake behind an axial fan has a periodic flow structure with respect to the blade phase and the characteristic flow structure is shifted downstream in the next phase.

• 대한공간정보학회지
• /
• 제18권2호
• /
• pp.3-12
• /
• 2010

최근 항공사진과 고해상도 위성영상의 보급과 수치사진측량 시스템 및 분석 알고리즘의 발전으로 인하여 데이터 추출, 영상이미지프로세싱처리, 정밀 대축척지도제작 등의 연구가 진행되고 있지만 2차원 평면 정보라는 제한적인 요소를 가지고 있다. 이에, 높은 위치정확도와 개체인식을 위한 정확한 공간정보와 3차원 좌표가 필요하게 되었다. 본 연구에서는 높은 위치정확도가 검증된 LiDAR의 3차원 공간정보를 이용하여 실제 지형을 반영하였고, 센서 최적 위치를 도출하기위해 확률알고리즘을 개발하고 공간분석을 통해 확률 값을 산정하였다. Grid기반인 2차원 3차원 센서위치지점을 생성하고 LiDAR의 3차원정보를 센서감지영역 산정에 적용하였다. 이 데이터를 바탕으로 알고리즘을 구현하여 최적 센서위치지점으로 선정하였다. 또한 최적 센서위치지점 선정 시 고려사항을 3가지 조건으로 나누었다. 첫째조건은 방해물이 없는 2차원인 경우(2-D Non obstacle), 둘째조건은 방해물이 존재하는 2차원인 경우(2-D Obstacle), 셋째는 방해물이 존재하며 3차원인 조건(3-D Obstacle)으로 설정하였다. 이 3가지 조건에 알고리즘을 적용하여 2차원, 3차원적 공간에 대한 최적위치선정 방법을 검토하였다. 결론적으로 본 연구에서는 LiDAR 데이터를 이용하여 정보 수집을 위한 지상 고정센서 위치 선정 방법론을 제시하고자 하였다.

• Journal of electromagnetic engineering and science
• /
• 제10권2호
• /
• pp.67-72
• /
• 2010

A new type of monopole antenna whit broadband characteristics is presented in this article. To reduce the size of the antenna, its upper part is folded. By separating the current flow, the resonance in the shorter part is in the higher band; and the longer part resonates in the lower band. This gives the broadband characteristics of the antenna. Slots on the corner using an oblique line improve the impedance matching and bandwidth. The measurement results show that the bandwidth operates from 0.848~0.992 GHz and 1.744~2.528 GHz, and the radiation patterns are in an omni-directional shape.

• Journal of information and communication convergence engineering
• /
• 제12권1호
• /
• pp.1-7
• /
• 2014

A novel design of a simple circular ring with open-ended monopole antenna for wireless local area network (WLAN) applications is proposed in this article. The proposed antenna consists of an open-ended circular ring and $50-{\Omega}$ microstrip feed-line. The proposed antenna is capable of generating two separate resonant modes with good impedance-matching conditions. A prototype of the proposed antenna is designed, fabricated, and measured. Acceptable agreement between the measurement and simulation results is achieved. Experimental results show that the proposed antenna has operating bandwidths of 1.99-3.04 GHz and 5.08-6.1 GHz with a return loss of less than -10 dB, covering the required bandwidths of the 2.4/5.2/5.8-GHz WLAN standards. This is a microstrip antenna for IEEE 802.11a/b wireless local area networks applications. Meanwhile, the two-dimensional (2D) radiation patterns and three-dimensional (3D) gain performance of the antenna are also observed and discussed.

• 보존과학회지
• /
• 제22권
• /
• pp.31-42
• /
• 2008

석조문화재는 설계 도면이 소실된 경우가 많으며 정확한 형태정보가 없어 보존과 원형복원에 큰 어려움이 있다. 최근에 정밀실측과 같이 수치정보를 구축하는 연구가 활발히 진행되고 있지만, 대부분 2차원적으로서 활용도에 한계가 있다. 이를 보완하는 새로운 기법으로 3차원 영상 스캐닝 시스템이 도입되고 있다. 이 연구에서는 대원사다층 석탑을 대상으로 3D 스캐닝을 통하여 3차원 영상분석과 자료를 구축하고 실측도를 작성하였으며, 이를 바탕으로 수평 및 수직 변위를 평가하였다. 부재별 수치를 측정한 결과, 각 방면에서 서로 다른 수치를 보이고 있으며 상하 및 좌우변위가 나타났다. 수평적 상하변위는 좌면과 우면에서 탑신의 상부로 갈수록 컸으며, 수직적 좌우변위는 8층 옥개석이 북서쪽으로 치우쳐 있는 것으로 확인되었다. 이와 같은 변위측정과 평가는 석조문화재의 특성상 불균등한 표면과 프로그램 및 연구자에 따라 약간의 오차는 발생할 수 있다. 앞으로 다양한 실측과 안정성 평가연구가 진행된다면 석조문화재의 원형보존과 훼손상태 파악에 대한 정확한 자료를 제시할 수 있을 것이다.