• Spatial Information Research
• /
• v.11 no.4
• /
• pp.481-491
• /
• 2003

This study aims at generating a continuous map by coordinates transformation between cadastral maps with different surveying origins. The continuous cadastral map is useful in various fields of GIS. For this purpose, an experimental study was conducted at Osan-Si, Kyonggi Province in cooperation with related institutions. In this study, three control point zone, large, medium, and small zone were to!;ted. For each control point, the currently used data were compared with the data at the surveyed time. About coordinate transformation method, we tested Helmert, Affine, and Polynomial methods which are the most representative among 2-dimensional coordinate transformations. These three transformation methods were evaluated according to variation of transformed parcel shape and agreement with neighboring areas. As the result of the evaluation, Affine transformation in large zone is the most appropriate coordinate transformation method fer Osan-Si.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.205-212
• /
• 1999

A three dimensional binary parallel robot manipulator uses actuators which have only two stable states and its structure is variable geometry truss. As a result, it has a finite number of states and fault tolerant mechanism because of kinematic redundancy. This kind of robot manipulator has some advantages compared to a traditional one. Feedback control is not required, task repeatability can be very high, and finite state actuators are generally inexpensive. Because the number of states of a binary robot manipulator grows exponentially with the number of actuators it is very difficult to solve and inverse kinematic problem. The goal of this paper is to develop an efficient algorithm to solve an inverse kinematic problem of three dimensional binary parallel robot manipulator using a backbone curve when the number of actuators are too much. We first derive the coordinate transformations associated with a three degree of freedom in-parallel actuated robot manipulator. The backbone curve is generated optimally by considering the maximum roll and pitch angles of the robot manipulator configuration and length of link. Then, the robot manipulator is fitted along the backbone curve with some criterion.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.145-152
• /
• 1997

A coupling of two-dimensional model and GIS technique is applied to simulate sediment transport analysis. Accurate transformations are performed for the data which have various reduced scales. Basic maps are discretized the mesh of true scale for the finite element model by using the digital map and the Traverse Mercator coordinate. Under $200m^3/s$ flow rate condition, velocity vectors, depth contours, velocity contours and deposition contours are Presented for the 5km reach of midstream of Keum River from confluence of Ji-chun to Baekche Bridge. The simulation results of the study agree well with those of one-dimensional varied flow analysis and observed data. The flow and deposition pattern revealed a meandering characteristics of the river qualitatively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.309-317
• /
• 2007

Cadastral control points in Korea are refered to various origins, for example an early separated small triangulation, a separated small triangulation, a separated control surveying origin and an unified origin. Cadastral map with early separated small triangulation origin have difficulties to connect with national GIS data by refered an unified origin. We determined transformation parameters from old origin to unified origin using 2D conformal transformation method. To evaluate of transformation accuracy, we compared with GPS field surveying results. And we experiment on coordinate transformations with unified results between the local geodetic datum and the new Korea geodetic datum.

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.92-105
• /
• 2004

A new algorithm for planning a collision-free path based on algebraic curve is developed and the concept of collision-free Path Space (PS) is introduced. This paper presents a Geometry Mapping (GM) based on two straight curves in which the intermediate connection point is organized in elliptic locus ($\delta$, $\theta$). The GM produces two-dimensional PS that is used to create the shortest collision-free path. The elliptic locus of intermediate connection point has a special property in that the total distance between the focus points through a point on ellipse is the same regardless of the location of the intermediate connection point on the ellipse. Since the radial distance, a, represents the total length of the path, the collision-free path can be found as the GM proceeds from $\delta$=0 (the direct path) to $\delta$=$\delta$$\_$max/(the longest path) resulting in the minimum time search. The GM of elliptic workspace (EWS) requires calculation of interference in circumferential direction only. The procedure for GM includes categorization of obstacles to .educe necessary calculation. A GM based on rectangular workspace (RWS) using Cartesian coordinate is also considered to show yet another possible GM. The transformations of PS among Circular Workspace Geometry Mapping (CWS GM) , Elliptic Workspace Geometry Mapping (EWS GM) , and Rectangular Workspace Geometry Mapping (RWS GM), are also considered. The simulations for the EWS GM on various computer systems are carried out to measure performance of algorithm and the results are presented.