• Journal of the Korean Chemical Society
• /
• v.41 no.3
• /
• pp.144-149
• /
• 1997

Organic electroluminescence devices(ELD) were fabricated using by molecularly doped method with N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) as a hole transport agent, squarylium dye as an emitting agent, and side chain liquid crystalline polymer(MCH) as matrix for TPD. An indium-tin-oxide(ITO) coated glass and an Mg electrode were used as the hole and the electron injecting electrode, respectively. The highest stability of ELD was obtained by spin coating method using dichloroethane as a solvent at a polymer/TPD concentration of 0.005 wt%. For the EL cell with ITO/polymer-TPD/SQ dye/Mg structure, we achieved light red luminescence at a current of 102 mA/$cm^2$ with an applied voltage of 23 V.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.15-21
• /
• 2016

This experiment was conducted to test desorption and recycling characteristics for silver ion adsorbed into waste coffee grounds by using various desorbing agents such as nitric acid, ethylene diamine triacetic acid (EDTA) and nitrilo triacetic acid (NTA). It is appeared that the highest desorption efficiency for silver ions was obtained as about 97.8 % by 1.0 M of nitric acid solution. Also, in the case of less than 1.0 of the ratio of solid and liquid (S/L) (g/L), silver ions adsorbed onto coffee grounds was desorbed as about 98~100 %, and most of desorption process was completed within 60min. In addition, adsorption capacity of reused waste coffee grounds for silver ions was highly maintained as about 43.9 mg/g until the $2^{nd}$ cycle, as compared with the adsorption capacity with 45.9 mg/g of the adsorption capacity for virgin waste coffee grounds.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.137-145
• /
• 2015

This study aimed to develop epoxy putty as a multi-purpose connection and restoration material that can be used for material-specific restoration work such as metal, wood, ceramics, earthenware and stone artifacts by replacing synthetic resins currently being used for preservation treatment of cultural assets. Existing synthetic resins have the issue of cutting force resulting from high strength, deflection resulting from long hardening time, contaminating the surface of artifacts through staining on tools or gloves and need for re-treatment resulting from material discoloration. Accordingly, paste type restoration material most widely being used in the field of cultural assets preservation treatment was selected and examined the property to select it as an object of comparison. Based on such process, epoxy putty was developed according to the kind of agent, hardener and filler. For the purpose of solving the issues of existing material and allowing the epoxy putty developed to have similar property, property experiments were conducted by selecting agents and hardeners with different characteristics and conditions. The study findings showed that both kinds are paste type that improved work convenience and deflection issue as a result of their work time of within 5~10 minutes that are about 3~10 times shorter than that of existing material. In regards to wear rate for increasing cutting force, it improved by about 3 times, thereby allowing easy molding. For the purpose of improving the issue of surface contamination that occurs during work process, talc and micro-ballon were added as filler to reduce the issue of stickiness and staining on hand. Furthermore, a multi-purpose restoration material with low shrinkage, low discoloration and high cutting force was developed with excellent coloring, lightweight and cutting force features.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.2
• /
• pp.54-57
• /
• 1980

Trichloromethylphosphonyl dichloride was prepared by the aluminium chloride method. We synthesized several heterocyclic compounds containing phosphorus atom by the stepwise esterification of trichloromethylphosphonyl dichloride with ethylene glycol, 2-mercaptoethanol, ethylene diamine, and 2-aminoethanol and the resulting heterocyclic compounds are 2-trichloromethyl-1,3,2-dioxa-, 2-trichloromethyl-1,3,2-thioxa-, 2-trichloromethyl-1,3,2-diaza-, 2-trichloromethyl-1,3,2-diaza-, and 2-trichloromethyl-1,3,2-oxazaphospholane-2-oxide. The best results were obtained in the solution of triethylamine as hydrochloric acid trapping agent. The structure of five-membered heterocyclic phosphonates were characterized by their IR, NMR, and elementary analysis and the mass spectra of the compounds were analyzed.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1295-1298
• /
• 1999

Novel platinum(IV) complexes with asymmetric chiral diamine ligands cis,cis,trans-A2PtCl2(X)2 (X = OH, OCOCH3, OCOC2H5, A2 =NH2CH(CH3)CH2NH(c-C6H11)(apcha), NH2CH(CH3)CH2NH(c-C5H9)(apcpa)) have been prepared. One of the platinum(IV) complexes, (apcpa)PtCl2(OCOC2H5)2(6), was subjected to X-ray crystallographic analysis. The crystal structure of (apcpa)PtCl2(OCOC2H5)2 (monoclinic, P21 (No. 4), a = 9.1391(1), b = 22.2517(1), c = 10.0687(1)Å, β= 109.105(1)。 , V = 1934.80(3)Å3 , Z = 4, R1 = 0.0532) exhibits that the platinum atom achieves a typical octahedral arrangement with two nitrogen atoms in cis positions and two carboxylato group in trans positions. The spectroscopic data disclose that these platinum(IV) complexes are stable and their molecular structures are retained in aqueous solution. The title complexes are highly cytotoxic in vitro but do not exhibit oral anticancer activity in vivo.

• Rapid Communication in Photoscience
• /
• v.1 no.2
• /
• pp.27-29
• /
• 2012

Noble diamine monomers containing thiophene moiety were prepared, such as 2,5'''-diamino-2, 2':5', 2'':5'', 2'''-quaterthiophene (4TDA) and 2, 5'''''-diamino-3'', 4'''-dihexyl-2,2':5', 2'':5'', 2''':5''', 2'''':5'''', 2'''''-sexithiophene (6TDA). Then, these monomers were utilized to prepare polyimides with 3,6-diphenylpromellitic dianhydride (DPPMDA), 3,6-di(4'-trifluoro-methylphenyl) pyromellitic dianhydride (6FPMDA) or 3,6-di(3',5'-bis (trifluoromethyl)phenyl) pyromellitic dianhydride (12FPMDA) via a conventional two-step process. The polyimides were characterized by FT-IR, TGA and DSC, and then subjected CV, UV-vis and PL measurements. The polyimides containing thiophene moiety exhibited high glass transition temperatures ($280{\sim}310^{\circ}C$) and excellent thermal stability (> $420^{\circ}C$) in air as well as green emission (535~586 nm).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.09a
• /
• pp.23-38
• /
• 1995

고분자막에 의한 기체분리는 심냉분리법, 흡수법, 흡착법등에 비하여 에너지가 절약되며 장치가 간결하고 운전비용이 낮은 이점 때문에 여러가지 기체혼합물에 대하여 여러가지 목적으로 응용되기에 이르렀다. O$_{2}$/N$_{2}$ 분리막으로 요구되는 기본특성은 1) 높은 O$_{2}$ 투과성 2) 높은 O$_{2}$ 선택성 3) 막 형성에 충분한 기계적 강도 4) 열, 화학적으로 안정성이 있어야 한다. 그런데 투과계수 P$_{O_(2)}$와 투과선택도 P$_{O_(2)}$/P$_{N_(2)}$ 관계 Fig.2 에서 보는 바와 샅이 대체로 투과선택성은 상반관계에 있어서 polyimide는 높은 선택성을 나타내고 기계적 강도가 좋고 높은 열에 대하여 안정하기 때문에 일단 막재료로 양호한 조건을 갖추고 있으나 투과계수가 크지 않아 선택도를 크게 감소시키지 않으면서 투과계수를 향성시키려는 노력이 경주되고 있다. 따라서 polyimide의 화학구조와 투과계수, 투과선택도의 관계를 고찰하는 것은 대단히 중요하다. 특히 최근에는 polyimide의 화학구조를 계통적으로 변화 시켜가면서 구조와 투과특성을 고찰한 연구가 많으며, 이러한 연구를 총망라하여 화학구조와 투과특성을 고찰한 훌륭한 총설들이 발표되어왔다. Fig.3에는 지금까지 연구된 중요한 polyimide를 형성하는 dianhydride와 diamine의 구조식을 표시하였으며 이들 구조의 변화에 의하여 기체투과계수와 투과선택도가 어떤 영향을 받는지 고찰하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1511-1518
• /
• 2011

A series of 1,4-disubstituted octahydroquinoxaline-2,3-dione derivatives was prepared through two steps reaction. The latter involves the formation of N,N-disubstituted cyclohexane-1,2-diamine derivatives (la-j) through reductive alkylation of 1,2-cyclohexanediamine with different aldehydes in presence of sodium cyanoborohydride. Fusion of compounds (1a-j) with diethyl oxalate affording the target compounds (2a-j). Elucidation of structures of compounds (2a-j) was based upon different spectral data as well as the elemental methods of analyses. In addition, mass spectrometry and X-ray diffraction analyses were carried out. Moreover, the lipophilicity of the target compounds as expressed from the Clog P. Most of the test compounds (2a-j) showed weak to moderate antibacterial and antifungal activities against most of the used bacterial and fungal strains in comparison to chloramphenicol and clotrimazole as reference drugs respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.358-360
• /
• 2001

In this study, the bis(8-oxyquinolino)zinc II (Znq$_2$) were synthesized successfully from zinc chloride (ZnC1$_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye (DCJTB)-doped and inserted Znq$_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4,4'- diamine(TPD), and the host material of emission layer is Znq$_2$. And we study the electrical and optical properties of devices. We found that the device using Znq$_2$ inserting layer result in the increased efficiency.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.235-239
• /
• 2011

Fe/Al-MCM-41was found to be an effective catalyst for the synthesis of quinoxaline derivatives from the condensation of the 1,2-diamines and 1,2-dicarbonyl compounds in good yields. The catalyst is recyclable and reusable.