• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.17-25
• /
• 2018

목 적 : 전립선 암 환자의 입체적세기변조방사선치료(VMAT)시 복부체형 및 에너지 변화에 따른 선량을 비교하였다. 대상 및 방법 : 전립선암으로 본원에 내원한 7명의 환자를 대상으로 하였으며, 복부체형을 -2.0 cm에서 2 cm까지 0.5 cm씩 변화시키는 동시에 6, 10, 15 MV 각각의 에너지에서 VMAT 치료계획을 수립하였다. 체형변화에 따른 표적장기 내 선량변화를 평가하기 위해 PTV의 선량도(Conformal index, CI), 선량균등도(Homogeneous index, HI), $D_{max}$ $D_{95%}$, $D_{50%}$, $D_{2%}$를 조사하였고, 정상조직 내 선량 변화를 평가하기 위해 직장과 방광의 $V_{70Gy}$, 대퇴부 머리의 $D_{max}$를 분석하였다. 결 과 : PTV 내의 $D_{max}$ 값 중 6 MV에서는 1.0 cm의 체형 감소에서 107.2 %로 선량이 상승하였고, 10 MV와 15 MV에서는 1.5 cm 체형 감소에서 각각 107.1 %, 107.0 %로 선량이 증가하였다. PTV 내의 $D_{50%}$ 값 중 6MV에서는 1.0 cm의 체형 증가에서 99.64 %로 선량이 감소하였고, 10 MV와 15 MV에서는 1.5 cm 체형 증가에서 각각 99.78 %, 99.97 %로 선량이 감소하였다. 2.0 cm 체형 증가에서는 각각 99.30 %, 99.52 %로 선량 감소를 보였다. 직장과 방광에 대한 선량은 체형이 감소됨에 따라 점차적으로 선량이 증가하였고, 체형이 증가됨에 따라 선량이 감소하였다. 6 MV에서 가장 급격한 선량 감소를 보였으며, 10 MV에서 직장 $V_{70Gy}$는 체형이 2.0 cm 줄어들 때 11.50 %에서 12.76 %로 증가했다. 방광 $V_{70Gy}$도 14.0 %에서 15.2 %로 증가했다. 또한 대퇴부 머리에서도 체형이 감소됨에 따라 선량이 증가함을 나타내었다. 결 론 : VMAT 치료시 복부체형 변화에 따라 선량분포 결과가 바뀔 수 있는데, 치료 시 SSD 및 CBCT를 이용하여 6 MV에서는 체형이 1 cm 이상 감소되거나 1.0 cm 이상 증가되었을 때, 10 MV와 15 MV에서는 1.5 cm 감소 또는 1.5 cm 증가되었을 시 re-simulation을 통해 치료계획을 새로 세워야 할 것으로 사료되어진다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.104-111
• /
• 2013

균열을 가진 콘크리트에서는 균열폭으로 유입되는 염화물 이온에 의해 열화가 가속화된다. 본 연구는 균열을 가진 콘크리트의 염화물 확산에 대한 모델링으로, 정상상태를 가정하여 1차원 (이방성) 및 2차원 (등방성) 균열 모델링을 수행하였다. 기존의 균열 모델링에서는 직사각형 균열패턴으로 모델링을 수행하였으나, 본 연구에서는 조도를 가진 쐐기형 형태로 균열을 모델링하였다. 검증을 위하여 1차원 유입에 대해서는 콘크리트 시편에 균열을 유입하여 염화물 영동실험을 수행하였으며, 2차원 유입에 대해서는 기존의 실험결과를 이용하여 검증을 수행하였다. 모든 경우에서 균열형태를 쐐기형으로 고려하여 염화물 확산성이 감소되었으며, 조도를 고려함으로서 합리적인 결과가 도출되었다. 특히 0.10~0.15의 조도계수를 고려할 때, 실험값에 가장 근접한 결과를 나타내었다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.9-16
• /
• 2003

A strategy of the optimal shape design with FEA(Finite Element Analysis) for 2-D structure is proposed by comparing subproblem approximation method with first order approximation method. A cantilever beam with two different loading conditions, a concentrated load and an evenly distribute load, and truss structure with a concentrated loading condition are implemented to optimize the shape. It gives a good design strategy on the optimal truss structure as well as the optimal cantilever beam shape. It is found that the convergence is quickly finished with the iteration number below ten. Optimized shapes of cantilever beam and truss structure are shown with stress contour plot by the results of the subproblem approximation method and the first order approximation methd.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1096-1101
• /
• 2004

산업현장에서의 3-D 이미지의 활용은 영화, 애니메이션, 산업 디자인, 의학, 그리고 교육과 공학분야에서 많은 영향을 미치고 있다. 90년대부터 두 개의 영상을 이용하여 영상으로부터 깊이 정보를 추출하기 위한 활발한 연구가 진행되기 시작하면서 3-D 정보 획득에 관한 연구가 진행되었다. 3-D 정보를 획득하는 방법으로, Structured Light 기법은 제어할 수 있는 점, 선, 격자, 원모양의 광원을 대상물체에 투사하며, 대상물체에 형성된 실루엣을 시각센서로 3-D 정보를 추출하는 방식이다. 또 다른 Time of flight 방식은 초음파를 이용한 방법과 레이저를 이용한 방법이 있으며, 그 외에도 쌍안비젼, Shape from Shading, Surface from Texture 그리고 Focusing 등의 원리를 이용한 기법이 있다. 이런 방범들은 여러 어려운 점들이 있어 이를 감안하여 손쉽게 3-D 영상 이미지를 얻는 방법으로 3-D 정보를 얻기 위해 본 논문에서는 삼각측량 시스템을 만들어 룩업 테이블을 만든다. 3-D 정보를 가지고 있는 룩업 테이블을 통해 시스템 위에 있는 물체의 이미지 좌표와 대칭을 통해 3-D 정보를 획득하여 영상 이미지를 복원하는 방법을 고찰 연구하였다.

• International Journal of Human Ecology
• /
• 제15권2호
• /
• pp.13-21
• /
• 2014

This study investigated the anthropometric characteristics of US women 26 to 45 years of age to classify their body shapes into different categories. Research data was obtained from 2950 women 26 to 45 years of age who participated in the SizeUSA study. A 26 to 35 years of age group and a 36 to 45 years of age group were selected from the data pool. A total of 26 measurements important for body shape classification and for apparel product development was used for the data analysis. Five factors accounted for the US women's body measurements. The body shapes of women were categorized into 4 types: Obese A-Shape, Overweight Y-Shape, Obese H-Shape, and Normal S-Shape. Normal S-Shape was the most common body shape type. More women in the 26 to 35 years of age group had Normal S-Shape type than women in the 36 to 45 years of age group. More women in the 36 to 45 years of age group had Obese A-Shape, Overweight Y-Shape, and Obese H-Shape than women in the 26 to 35 years of age group. Younger US women, 26 to 35 years of age had slimmer body sizes with more balanced body shapes; however, older US women, 36 to 45 years of age had larger body sizes with more various body shapes.

• 소성∙가공
• /
• 제17권6호
• /
• pp.393-400
• /
• 2008

Springback is one of the most difficult phenomena to analyze and control in sheet forming. Most of traditional springback control methods rely on experiences of skilled workers in industrial fields. This study focuses on prediction and generation of optimum reconfigurable die surfaces to control shape errors originated by springback. For this purpose, a deformation transfer function(DTF) was combined with finite element analysis of the springback in the 2D sheet forming model of elastic-perfectly plastic materials under the condition without blank holder. The results showed shape errors within 1% of the objective shape, which were comparable with analytically predicted errors. In addition to this theoretical analysis, DTF method was also applied to 2D and 3D sheet forming experiments. The experimental results showed ${\pm}0.5$ mm and ${\pm}1.0$ mm shape error distribution respectively, demonstrating that reconfigurable die surfaces were predicted well by the DTF method. Irrespective of material properties and sheet thickness, the DTF method was applicable not only to FEM simulation but also to 2D and 3D elasto-reconfigurable die forming. Consequently, this study shows that springback can be controlled effectively in the elasto-RDF system by using the DTF method.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1300-1311
• /
• 2004

The aim of this study was to provide the 2 and 3 dimensional statistics requisite in the sizing system and design of gloves. The 64 2-dimensional static measurements were selected to provide information about hands. Participants in the study were 824 adults, aged between 18 and 64. To summarize the information from the measurement values, a Factor Analysis and a Cluster Analysis among multivariate analyses were performed. 3-D scanner was used for visual results of hand shape of each cluster. The results were as follows. Twenty-two items were used for the factor and cluster analysis in order to classify the adult hand shape. The variable quantities that are explained by a total of 3 factors amounted to under 79.37% of the variable quantities. The definition results of the factors related to the hands are as follows: Factor 1 is the horizontal dimension, the thickness of hand factor; Factor 2 is the height of the crotch; and Factor 3 is the vertical dimension of the hand. The adults' group hand was divided into 2 clusters according to a cluster analysis using factor scores. The characteristics according to hand type were as follows: Cluster 1 referred to high horizontal dimensions and thickness, rather small vertical dimensions and crotch height; and Cluster 2 represented the rather smaller horizontal dimensions and thickness but longer hand length than Type 1. To provide specific shape data of each cluster, 3-D scanner measurement was performed. 3-dimensional data base was developed for each cluster type and visual information was provided.

• 소성∙가공
• /
• 제10권4호
• /
• pp.294-301
• /
• 2001

The sensitivity method has been applied to find perform shape that results in the desired shape after foring. As a 2D example, initial shape of specimen for the cylinder shape without barrelling after forging has been found. The method is then applied to various shapes of 3D free forging and initial shapes of the corresponding specimens after forging have been found successfully The sensitivity method is proven to be an effective and accurate tool for the preform design.

• Korean Journal of Mathematics
• /
• 제16권1호
• /
• pp.25-40
• /
• 2008

We are concerned with a free boundary problem for the 2D Stokes channel flows, which determines the profile of the wing for the channel, so that the given traction force is to be distributed along the wing of the channel. Using the domain embedding technique, the free boundary problem is transferred into the shape optimization problem through the compliant formulation by releasing the traction condition along the variable boundary. The justification of the formulation will be discussed.

• Current Optics and Photonics
• /
• 제2권4호
• /
• pp.332-339
• /
• 2018

A new multi-frequency fringe projection method is proposed to reduce the nonlinear phase error in 3-D shape measurements using an adaptive compensation method. The phase error of the traditional fringe projection technique originates from various sources such as lens distortion, the nonlinear imaging system and a nonsinusoidal fringe pattern that can be very difficult to model. Inherent possibility of phase error appearing hinders one from accurate 3-D reconstruction. In this work, an adaptive compensation algorithm is introduced to reduce adaptively the phase error resulting from the fringe projection profilometry. Three different frequencies are used for generating the gratings of projector and conveyed to the four-step phase-shifting procedure to measure the objects of very discontinuous surfaces. The 3-D shape results show that this proposed technique succeeds in reconstructing the 3-D shape of any type of objects.