• 대한방사선기술학회지:방사선기술과학
• /
• 제37권3호
• /
• pp.203-209
• /
• 2014

쇄골 CT 영상을 이용하여 보급형 3D 프린터로 제작된 모델로 사전 수술계획을 실시하여 수술효율에 대한 유용성과 임상적 활용가능성을 평가하였다. CT 영상을 Open Source DICOM Viewer Osirix에서 STL 파일로 변환하여 FDM 와이어 척층가공방식의 보급형 3D 프린터로 환자 맞춤형 쇄골 골절 모델을 제작하였다. 또한, 인체의 좌우 대칭 특성을 이용하여 골절되지 않은 반대편 쇄골의 STL 파일을 Mirror 기법으로 손상되기 전 원형의 모델을 복원, 제작하였다. 모델은 골절의 위치와 크기, 정도가 동일하게 출력되었다. 영상의학과에서 적은 비용과 시간으로 직접 제작한 쇄골 모델을 활용하면 수술시 2차 손상을 줄이고, 최소 침습적 피하금속판 골유합술(MIPO)로 수술효율을 높일 수 있어 임상적으로 유용할 것으로 생각된다.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.435-442
• /
• 2017

반사 굴절 광학계는 굴절과 반사를 이용하여 영상을 전달한다. 영상의 질을 높이려면 광학계에 있는 부경의 편심과 경사가 작게 발생되고 주경이 광량을 최대로 받도록 부경 지지대의 형상이 결정되어야 한다. 특히 감시 정찰용 광학계는 랜덤 가속도 진동을 심하게 받는다. 이러한 환경하에 최선의 설계를 하기 위하여 표준편차로 표현된 편심과 경사에 대한 제한조건을 만족하면서 부경 지지대의 부피를 최소화하여야 한다. 편심과 경사의 표준편차는 통계적인 표현이므로 이들에 대한 설계민감도를 해석학적으로 유도하기가 어렵다. 그러므로, 이 표준편차들을 반응 표면 분석법을 이용하여 2차 회귀 방정식으로 대체한 후 형상 최적 설계를 수행하였다. 검토 결과 본 논문의 방법이 랜덤 진동을 받는 강건한 부경 지지대의 형상 최적화에 효율적임을 알 수 있다.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.45-51
• /
• 1996

Silicon wafers are required to be finished under the roughness of nanometer order for the subsequent chip fabrication processes. Recently, the finish grinding techniques have been researched for the improvement of accuracy and surface roughness simultaneously. Among them, the grinding technique using fine abrasive has been known as an easily accessible method. However, the manufacture of the fine grit grinding wheel has been very difficult because of the coherence of the grits. In this paper, the development of the ultrafine grit silica($SiO_2$) grinding wheel by the combination of the binder coating and the vacuum forming techniques is reported. And, the mechanochemical removal effects of the grinding conditions are discussed. Finally, a successful result of Ra O.4nm. Rmax 4nm in the ground surface roughness of a 6 inch silicon wafer was achieved.

• 천문학회보
• /
• 제44권2호
• /
• pp.79.1-79.1
• /
• 2019

The Schwarzchild-Chang telescope is a confocal off-axis two mirror telescope with D = 50 mm, F = 100 mm and FOV = 8 ° × 8 °. Unlike common off-axis telescopes, the mirrors of the Schwarzchild-Chang telescope share their focal points to remove the linear astigmatism. In this poster, we show the alignment process of the Schwarzchild-Chang telescope with wavefront measurement and the sensitivity table method. Wavefront is measured using the Shack-Hartmann sensor, and Zernike polynomials are obtained from measured wavefront. Sensitivity table method is to calculate alignment errors from the Zernike coefficients. As a result, we evaluate tilt, decenter, and despace of each mirror of linear astigmatism-free con-focal off-axis system.

• 천문학회보
• /
• 제44권2호
• /
• pp.47.1-47.1
• /
• 2019

We report the design and vibration analysis for the optomechanical structures of Linear Astigmatism Free - Three Mirror System (LAF-TMS). LAF-TMS is the linear astigmatism free off-axis wide-field telescope with D = 150 mm, F/3.3, and FOV = 5.51° × 4.13°. The whole structure consists of four optomechanical modules. It can accurately mount mirrors and also can survive from vibration environments. The Mass Acceleration Curve (MAC) is adapted to the quasi-static analysis. Modal, harmonic, and random vibration analysis have been performed under the qualification level of the launch system. We evaluate the final results in terms of von Mises stress and Margin of Safety (MoS).

• 한국한의학연구원논문집
• /
• 제17권2호
• /
• pp.115-120
• /
• 2011

Objectives : The purpose of this study is to develop an apparatus which can take a facial image by self-operated capturing technique. The user can obtain one's facial image immediately after adjusting facial tilt and focusing distance. The system has been designed for classifying Sasang typology based on facial image. Methods : The system is composed of a Webcam, one-way glass mirror and mini LCD. The Webcam takes a facial image which is displayed on the mini LCD. Then the user can see and adjust to the right position in the real time through the image mirror-reflected from the mini LCD. The optical sensor is used to estimate the proper focusing distance. To verify the performance of the system, 11 characteristic points on the facial image are used and compared with high performance DSLR camera(D700) by applying the coefficient of variance and Bland-Altman Plot. Results : The developed system and D700 show enough agreement with the small coefficient of variance to analyse constitutional types with a facial im mage. However, the result of Bland-Altman plot shows that the width parameters have distortions owing to short focusing distance. Conclusions : The system is expected to be utilized on u-healthcare services for home environment after improving the distortion in the width parameters.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.329-332
• /
• 2001

본 논문에서는 Nd:LSB가 Q-스위칭의 고화흡수체로서 가능한지를 보였으며 고화흡수체를 이용한 수동형 D-스위칭 Nd:YAG 레이저에서 최적화된 출력 거울의 발사율, 피크 파워, 출력 에너지, 펄스폭, 출력 효율을 분석하였다. 포화흡수체 Nd:LSB를 이용한 수동형 Q-스위칭 Nd:YAG 레이저 시뮬레이션 출력 특성은 출력 거울의 반사율이 98%, 공진기 길이 30cm 일 때 출력 30MW, 펄스폭 6.23psfmf 얻을 수 있었다. 손실이 각각 2.2%, 2.1%, 1.5% 일 때 출력 에너지는 자자 143, 200, 209 $\mu$J을 얻었고 효율은 27%이었다.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.613-618
• /
• 1997

In this paper, we designed a line CCD camera for a flying image, which is composed of a line CCD sensor(2048 cells) and a rotating mirror, and investigated its optical properties. We also made the 3-D image from the flying image which is made of 2-D image being juxtaposed to 1-D images obtained by the camera, and performed the calibration to acquire high precision 3-D data. As a result, we obtained the 3-D measurement system using the slit type of laser projector is available to measure the high precision shape of objects.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2598-2602
• /
• 2010

Two 3-D zinc framework compounds, $[Zn_6(BTB)_4(4,4'-bipy)_4(H_2O)_4]{\cdot}9H_2O$ (1) and $[Zn_3(BTB)_2(4,4'-bipy)_2(H_2O)_2]{\cdot}5H_2O$ (2) ($H_3BTB$ = 1,2,3-benzenetricarboxylic acid, 4,4'-bipy = 4,4'-bipyridine), are obtained from the diffusion method and hydrothermal reaction respectively. Though 1 and 2 has the same coordination geometries of zinc atoms and coordination mode of $BTB^{3-}$, their 2-D layers are different: mirror symmetric layers in 1; parallel ones in 2, further connecting by 4,4'-bipy into 3-D frameworks. The hydrothermal reaction of 2 results in a more stable 3-D framework than the one in 1, which is supported by the single point energy calculations. 1 and 2 show similar blue fluorescence at 417 nm, which can be assigned to LMCT.

• Biomolecules & Therapeutics
• /
• 제2권1호
• /
• pp.16-22
• /
• 1994

Using 2 to 4 day-old postnatal rats, primary brain cell cultures were made from various brain regions (substantia nigra, hippocampus, striatum, and nucleus accumbens). Whole-cell patch clamp technique was used for electrophysiological studies. Neurons cultured from substantia nigra were characterized more in detail to test whether these cultured neurons were appropriate for physiological studies. Immunocytochemical and electrophysiological properties of these cultured neurons agreed with those from other in vivo or in vitro studies suggesting that cultured neurons maintained normal cytological and physiological conditions. Modulation of ionic channels through dopamine receptors were studied from brain areas where dopamine plays important roles on brain functions. When neurons were clamped near resting membrane potential (-74mV), R(+), R(+)-SKF 38393, a specific D$_1$receptor agonist, activated cultured striatal neurons, and dopamine itself produced biphasic responses. Responses of cultured hippocampal neurons to dopamine agonists were kinds of mirror images to those from striatal neurons; D$_1$receptor agonists inhibited hippocampal neurons but quinpirole, a D$_2$receptor agonist, activated them. Neurons cultured from nucleus accumbens were inhibited by dopamine.