• 자연과학논문집
• /
• 제7권
• /
• pp.27-35
• /
• 1995

정지영상이나 동영상 코딩에 적용되는 2-D DCT의 효율적인 VLSI 구현을 위한 방법을 제시하였다. 2차원 상태공간식에 근거한 알고리즘 및 데이타 분할기법을 활용하여 다중프로세서 구조에서 문제가 되는 프로세서간의 통신량을 크게 감축시켰으며, 모든 통신을 국부적(local)이 되도록 하였다. 순차 주사 방식의 영상데이타를 입력할 수 있도록 설계하여 입력장치에 소요되는 하드웨어를 최소화하였으며, 계산의 순서를 조정함으로써 일반적인 행.열 분할 방법을 사용하는 2-D DCT에서 필요로 하는 Transposition RAM을 제거하였다. 제안된 VLSI 구조는 실시간 one-chip 2-D DCT 및 보다 큰 2-D DCT로 확장될 수 있다.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.11-16
• /
• 2005

CAD/CAM system may have such advantages of cost reduction, production time shortening, and product quality improvement. But current advanced versions of CAD/CAM system for 3-D NC data generation are too much expensive to purchase and too difficult to make full use for small-scale manufacturers whose main products are of 2-D simple shapes. The objective of this paper is to introduce a cost-effective way to 2-D NC data generation with a widely spread CAD software. Using VISUAL LISP in the well-known AUTO-CAD, the contents and steps of an automatic NC data generation program are presented for 2-D machining of contours and pockets. To approve the usefulness of program, a test application to a real part is exhibited also.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1881-1886
• /
• 2016

본 논문에서는 기지국의 도움없이 인접한 기기 간에 직접 통신을 수행하는 D2D 단말에서 발생한 데이터를 인접한 D2D 단말로 릴레이하는 환경을 가정하였다. 이러한 환경에서 데이터를 수신한 전체 단말의 수를 최대화하기 위하여 모든 데이터 수신 단말들이 자신의 전송 범위 내의 인접 단말들에게 데이터를 릴레이하는 Epidemic 라우팅을 고려하였다. 또한, 다양한 네트워크 환경을 고려하여 특정 지역에 다양한 밀도로 단말이 밀집되어 분포하는 상황에 대한 MATLAB 시뮬레이션을 수행하고, 이를 기반으로 D2D SD의 전송 범위와 이 데이터를 릴레이 하는 다른 D2D 단말들의 전송 범위를 파라미터로 설정하여 Epidemic 라우팅의 데이터 확산 성능에 대한 비교 분석을 수행하였다.

• 한국통신학회논문지
• /
• 제40권3호
• /
• pp.602-612
• /
• 2015

현재 표준 차량 통신 프로토콜인 IEEE 802.11p는 차량 간 한 홉 전송을 수행하기 때문에 차량 환경에서 효율적인 정보 전달을 수행하는데 한계가 있다. 본 논문은 차량 환경에서 효율적인 정보 전달을 위해 무선 근거리 통신 중 하나인 LTE-D2D 기술을 사용한 차량 네트워크를 제안한다. 이때 전송 메시지 형태는 IP 패킷 옵션을 지닌 이름 기반 정보 메시지를 사용하고 일반 차량 노드는 요청하는 메시지를 중간 매개 노드인 대형 차량 노드로 전송하여 정보를 전송 받는다. 성능 분석을 통해 셀룰러 네트워크와 제안된 LTE-D2D 차량 네트워크에서의 패킷전달 시간에 따른 데이터 처리율을 비교하였다.

• 한국의류학회지
• /
• 제30권1호
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• 지구물리와물리탐사
• /
• 제13권2호
• /
• pp.159-168
• /
• 2010

석유/가스 물리탐사 분야에서의 최근 추세는 3D 탄성파 탐사라 할 수 있다. 기존의 2D 자료처리와는 달리, 3D탄성파 탐사 자료처리는 고가의 상용 소프트웨어 시스템과 고성능 컴퓨터가 필요한 것으로 인식되어 왔다. 본 논문에서는 일반 개인용 컴퓨터(PC)를 기반으로 일반에게 공개되어 있는 비상업용의 공유 소프트웨어 시스템들인 "SU, SEPlib, SEPlib3D"들을 선택적으로 조합하여 적용하는 3D 탄성파 자료처리 방법론을 제시하고, 이를 실제 자료에 매우 근접한3D 합성 탄성파 자료인 SEG/EAGE 3D 합성 자료에 적용하여 실질적인 적용성을 시험해 보았다.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.749-750
• /
• 2008

It is often required to display 3-D data onto a 2-D screen and to examine and verify validity of data. LIDAR data is a good example. They represent 3-D spatial information in text format. However, it is very difficult to examine data on a 2-D screen. A 3-D data viewing system has been implemented and tested in order to solve the problem.

• Journal of Information Technology Applications and Management
• /
• 제19권1호
• /
• pp.13-24
• /
• 2012

Usability and knowledge drawn from utilizing various ways of representing accounting data were examined. Classroom experiments were conducted to compare students' assessment of financial data using table of numbers, 2-dimensional column graphs (2D), 3-dimensional column graphs (3D), and mixed reality visualization of true 3-dimensional graphs (MR). The results showed that in assessing the financial status and performance of a firm, Table of numbers and MR took longer than 2D and 3D graphs. The time spent on true 3D graphs using MR technology was about the same as Table of numbers. When compared the assessment scores of the firm's financial status and performance between participants and experts, the difference was the least when participants used 2D graphs. However, MR was seen as being a new way to provide data of greater complexity and was very useful for financial information.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.429-439
• /
• 2006

The purpose of this study is to support the integration from current 2D drawing-based design to future 3D model-based design. In this paper, an important theme is the combination between the STEP-based 2D drawing standards (i.e., AP202) and the IFC-based 3D building model standards. To achieve the purpose, two methodologies are proposed as follows: the development of IFC extension model for the 2D shape data representation by harmonizing ISO/STEP AP202; and the development of mapping solution between IFC 2D extension model and KOSDIC by constructing the exchange scenario for 2D shape data representation. It is expected that the proposed IFC2X2 2D extension model and mapping solution will offer the basis of development of the integrated standards model in AEC industry.