• 분석과학
• /
• 제7권4호
• /
• pp.427-434
• /
• 1994

GFAAS(graphite furnace atomic absorption spectrophotometer)를 이용하여 혈액 중 납을 분석할 때, 납은 비교적 휘발성 원소인 관계로 바탕선이 높아지므로 희화 온도를 일정 온도 이상으로 높일 수 없었다. 그래서 종래에는 매트릭스 변형제를 사용하여 희화 온도를 $700^{\circ}C$까지 올려서 희화시켜야 바탕선이 안정되었다. 본 연구에서는 광온도 및 전류 제어 장치가 부착된 기기(Shimadzu, AA-6501S)를 사용하여 온도조절을 단시간에 정확히 함으로써 매트릭스 변형제를 사용하지 않고 Triton X-100으로만 희석하여 분석해도 희화 온도 $550^{\circ}C$ 부근에서 바탕선이 안정됨을 알았다. 또한 자동 바탕 보정 장치인 $D_2$ arc형과 SR(self reversal)법을 비교해 본 결과, 같은 농도에서의 흡광도는 $D_2$ arc형이 높았으나 BGC(background correction)값은 SR법이 높음을 알았다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.159-164
• /
• 2013

Difficulty of torque measurements in high-speed permanent magnet (HSPM) motors has necessitated the development of improved torque calculations. Hence, this paper presents an analytical torque calculation of a high speed permanent magnet (HSPM) motor based on the power factor angle. On the basis of analytical magnetic field solutions, the equations for circuit parameters such as back-emf and synchronous inductance are derived analytically. All analytical results are validated extensively by non-linear finite element (FE) calculations and measurements. The internal angle (${\delta}$) between the back-emf and the phase current is calculated according to the rotor speed by using analytical circuit parameters and the measured power factor because this angle is not measured but estimated in case of sensorless drive of the HSPM motor, significantly affecting torque calculation. Finally, the validity of the torque analysis method proposed in this paper is confirmed, by showing that the torque calculated on the basis of the internal angle is in better agreement with the measurements.

• Ocean and Polar Research
• /
• 제37권1호
• /
• pp.1-9
• /
• 2015

An approach based on the combined use of a 2D shallow water model and analytical 1D long wave run-up theory is proposed which facilitates the forecasting of tsunami run-up heights in a more rapid way, compared with the statistical or empirical run-up ratio method or resorting to complicated coastal inundation models. Its application is advantageous for long-term tsunami predictions based on the modeling of many prognostic tsunami scenarios. The modeling of the Chilean tsunami on February 27, 2010 has been performed, and the estimations of run-up heights are found to be in good agreement with available observations.

• 분석과학
• /
• 제23권3호
• /
• pp.278-283
• /
• 2010

본 연구에서는 국제적으로 관심의 대상이 되고 있는 폴리염화비페닐류 함유 액상폐기물의 효율적인 관리를 위해 국내에서 사용되고 있는 L2000DX을 이용한 스크리닝, 신속 GC/ECD 및 기존 GC/ECD 분석방법을 절연유 15건에 적용하였다. 분석 결과 L2000DX을 이용한 경우에는 4.4~182.8 mg/L의 농도 범위로 Aroclor 1242 환산농도가 검출된 반면, 기존 GC/ECD 및 신속 GC/ECD를 이용한 분석 결과 각각 불검출~14.63 mg/L 및 불검출~13.03 mg/L로 나타났다. GC/ECD 분석방법들 간에는 약 4 mg/L이하에서 거의 차이가 없었으나, 국내의 규제농도인 2 mg/L부근의 검출농도에서는 일부 시료의 경우 기존 GC/ECD 분석결과(2.71 mg/L)에 비해 신속 GC/ECD 방법이 다소 낮은(2.49 mg/L) 측정치를 보여 국내 규제기준 2 mg/L부근에서 저평가되는 경향이 있는 것으로 나타났다.

• 한국식품저장유통학회지
• /
• 제24권6호
• /
• pp.795-801
• /
• 2017

개별인정형 건강기능식품 기능성 원료로 개발한 두릅추출물의 표준화를 위해 항고혈압활성 효과를 가지고 있는 기능성분 HE를 지표성분으로 설정하고, HPLC/UV 방법을 이용하여 기능성분 분석법을 확립하며 그에 따른 유효성 검증을 실시하고자 하였다. 유효성 검증 결과, 본 시험법에서 표준용액의 피크유지시간과 두릅추출물의 피크유지시간이 일치하였다. 검량선의 결정 계수(R2)는 0.9999 이상의 높은 직선성을 보여 분석에 적합함을 알 수 있었으며, 검출 한계는 $12.0{\mu}g/mL$, 정량한계는 $36.5{\mu}g/mL$로 두릅 추출물 중의 HE 함량분석을 위한 충분한 한계 수준으로 확인되었다. 정확성에서 $98.8{\pm}0.865-104.7{\pm}2.536%$로 높은 수준의 HE 회수율을 보였으며, 평균 분석오차는 0.013%로서 기준인 10% 이내를 만족하였다. 또한 반복성에서는 평균 $101.5{\pm}0.4%$로 RSD 0.4%를 나타내었고, 실험실내 정밀성에서 RSD 0.2%, 완건성에서 RSD 0.2%를 나타내어 모두 적합함을 확인하였다. 한편, 제주산 두릅추출물 중에는 기능성 지표성분인 HE가 4.88% 함유되어 있는 것으로 확인되었다. 이상의 실험 결과, 두릅추출물의 항고혈압활성 기능성분인 HE의 HPLC/UV 분석방법은 특이성, 직선성, 정확성, 정밀성, 반복성, 완건성 등의 모든 항목에서 validation 기준에 적합한 시험 방법으로 확인되었다.

• 분석과학
• /
• 제32권5호
• /
• pp.163-172
• /
• 2019

Methamphetamine (MA) is currently the most abused illicit drug in Korea and its major metabolite is amphetamine (AP). As MA exist as two enantiomers with the different pharmacological properties, it is necessary to determine their respective amounts in a sample. Thus a chiral stationary phase liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was developed for identification and quantification of d-MA, l-MA, d-AP, and l-AP in human urine. Urine sample ($200{\mu}L$) was diluted with pure water and purified using solid-phase extraction (SPE) cartridge. A $5-{\mu}L$ aliquot of SPE treated sample solution was injected into LC-MS/MS system. Chiral separation was carried out on the Astec Chirobiotic V2 column with an isocratic elution for each enantiomer. Identification and quantification of enantiomeric MA and AP was performed using multiple reaction monitoring (MRM) detection mode. Linear regression with a $1/x^2$ as the weighting factor was applied to generate a calibration curve. The linear ranges were 25-1000 ng/mL for all compounds. The intra- and inter-day precisions were within 3.6 %, while the intra- and inter-day accuracies ranged from -5.4 % to 11.8 %. The limits of detection were 2.5 ng/mL (d-MA), 3.5 ng/mL (l-MA), 7.5 ng/mL (d-AP), and 7.5 ng/mL (l-AP). Method validation parameters such as selectivity, matrix effect, and stability were evaluated and met acceptance criteria. The applicability of the method was tested by the analysis of genuine forensic urine samples from drug abusers. d-MA is the most common compound found in urine and mainly used by abusers.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.48-54
• /
• 2012

In this paper, quantitative and systematic procedures for establishing Key Performance Indicators (KPI's) of R&D departments are presented. The proposed methodology is composed of 4 steps : 1) identification of critical success factors, 2) identification of potential KPI's, 3) determination of KPI's and 4) monitoring and execution. A Strategy Map has been presented to better align KPI's with a company's competitive strategies. Also, Analytical Hierarchy Planning (AHP) is used to determine weights of KPI's and Data Envelopment Analysis (DEA) is used to analyze the effectiveness of R&D departments. To demonstrate its validity of the proposed method, it has been applied to the R&D divisions of a semiconductor company.

• 분석과학
• /
• 제36권1호
• /
• pp.53-58
• /
• 2023

2'-Hydroxy-3',4'-methylenedioxy-3,4,5-trimethoxychalcone (HMTC) is a newly synthesized chalcone that affects proliferation, cytotoxic potential and apoptosis in human leukemia cells. However, no validated determination method has been described so far for HMTC in biological samples. Thus, we developed a liquid chromatographic method using a tandem mass spectrometry to determine HMTC in rat plasma. Liquid-liquid extraction with ethyl acetate was used for the clean-up procedure. The analyte was separated on a reversedphase column with mobile phase of distilled water and acetonitrile (2:8, v/v, including 0.1 % formic acid). The ion transition of the precursor to the product ion was principally deprotonated ions [M-H]^- at m/z 356.8 → 327.2 for HMTC. This analytical method was successfully applied in pharmacokinetic study of HMTC after intravenous administration in rats.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.13-22
• /
• 2013

It is difficult to analytically derive a volumetric displacement formula of gerotor hydraulic pump/motor because geometric shape of rotors is complicated. An analytical method about the volumetric displacement is proposed in this work, which is relatively easy and based upon two physical concepts. The first one is energy conservation between hydraulic energy of the pump/motor and mechanical input/output energy. The second concept is torque equilibrium with respect to inner and outer rotors. The formula about the volumetric displacement is derived for the common case of inner and outer rotors rotate with respect to fixed axes. The formula is verified by comparing another analytical displacement formula, and it is numerically verified by comparing numerical results, which is calculated for geometric specification of a motor. The numerical displacement is calculated through CAD software program and MATLAB program. The proposed analytical formula can be utilized in analysis and design of hydraulic gerotor motors.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.127-139
• /
• 2017

In this paper, an exact analytical solution for simply supported sandwich plate which considers the permeation effect of adhesives is presented. The permeation layer is described as functionally graded material (FGM), the elastic modulus of which is assumed to be graded along the thickness following the exponential law. Based on the exact three-dimensional (3-D) elasticity theory, the solution of stresses and displacements for each layer is derived. By means of the recursive matrix method, the solution can be efficiently obtained for plates with many layers. The present solution obtained can be used as a benchmark to access other simplified solutions. The comparison study indicates that the finite element (FE) solution is close to the present one when the FGM layer in the FE model is divided into a series of homogeneous layers. However, the present method is more efficient than the FE method, with which the mesh division and computation are time-consuming. Moreover, the solution based on Kirchhoff-Love plate theory is greatly different from the present solution for thick plates. The influence of the thickness of the permeation layer on the stress and displacement fields of the sandwich plate is discussed in detail. It is indicated that the permeation layer can effectively relieve the discontinuity stress at the interface.