• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.129-129
• /
• 2016

Graphene, as a single layer of $sp^2$-bonded carbon atoms packed into a 2D honeycomb crystal lattice, has attracted much attention due to its outstanding properties. In order to synthesize high quality graphene, transition metals, such as nickel and copper, have been widely employed as catalysts, which needs transfer to desired substrates for various applications. However, the transfer steps are not only complicated but also inevitably induce defects, impurities, wrinkles, and cracks of graphene. Furthermore, the direct synthesis of graphene on dielectric surfaces has still been a premature field for practical applications. Therefore, cost effective and concise methods for transfer-free graphene are essentially required for commercialization. Here, we report a facile transfer-free graphene synthesis method through nickel and carbon co-deposited layer. In order to fabricate 100 nm thick NiC layer on the top of $SiO_2/Si$ substrates, DC reactive magnetron sputtering was performed at a gas pressure of 2 mTorr with various Ar : $CH_4$ gas flow ratio and the 200 W DC input power was applied to a Ni target at room temperature. Then, the sample was annealed under 200 sccm Ar flow and pressure of 1 Torr at $1000^{\circ}C$ for 4 min employing a rapid thermal annealing (RTA) equipment. During the RTA process, the carbon atoms diffused through the NiC layer and deposited on both sides of the NiC layer to form graphene upon cooling. The remained NiC layer was removed by using a 0.5 M $FeCl_3$ aqueous solution, and graphene was then directly obtained on $SiO_2/Si$ without any transfer process. In order to confirm the quality of resulted graphene layer, Raman spectroscopy was implemented. Raman mapping revealed that the resulted graphene was at high quality with low degree of $sp^3$-type structural defects. Additionally, sheet resistance and transmittance of the produced graphene were analyzed by a four-point probe method and UV-vis spectroscopy, respectively. This facile non-transfer process would consequently facilitate the future graphene research and industrial applications.

• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.74-85
• /
• 2013

Since the underground transportation system is a closed environment, indoor air quality problems may seriously affect many passengers' health. The purpose of this study was to understand $PM_{10}$ characteristics in the underground air environment and further to quantitatively estimate $PM_{10}$ source contributions in a Seoul Metropolitan subway station. The $PM_{10}$ was intensively collected on various filters with $PM_{10}$ aerosol samplers to obtain sufficient samples for its chemical analysis. Sampling was carried out in the M station on the Line-4 from April 21 to 28, July 13 to 21, and October 11 to 19 in the year of 2010 and January 11 to 17 in the year of 2011. The aerosol filter samples were then analyzed for metals, water soluble ions, and carbon components. The 29 chemical species (OC1, OC2, OC3, OC4, CC, PC, EC, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V, Zn, $Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$, $Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were analyzed by using ICP-AES, IC, and TOR after proper pretreatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the $PM_{10}$ sources and then six sources such as biomass burning, outdoor, vehicle, soil and road dust, secondary aerosol, ferrous, and brakewear related source were classified. The contributions rate of their sources in tunnel are 4.0%, 5.8%, 1.6%, 17.9%, 13.8% and 56.9% in order.

• 한국축산식품학회지
• /
• 제28권4호
• /
• pp.422-430
• /
• 2008

본 연구는 거세한우 고기의 부위별 성분조성 및 육질특성을 조사하고자 거세한우 10두(28-30개월)에서 10부위(업진, 보섭, 채끝, 등심, 꾸리, 흥두깨, 목심, 설깃, 양지, 우둔)를 선정하여 성분조성 및 육질특성을 분석하였다. 10부위의 pH는 5.46-5.64범위였으며 꾸리부위가 5.64로 가장 높았던 반면에 보섭, 채끝, 및 우둔이 각각 5.49, 5.46, 5.47로 다른 부위와 비교했을 때 가장 낮게 나타났다(p<0.05). 일반성분조성을 분석한 결과 단백질 함량은 홍두깨 부위가 21.15%로 가장 높은 반면에 등심부위의 단백질 함량은 16.94%로 가장 낮은 것으로 분석되었고(p<0.05), 지방함량은 등심부위가 24.74%로 가장 높은 반면에 꾸리, 홍두깨 및 우둔부위의 지방함량은 유의적으로 가장 낮은 수준을 나타냈다(p<0.05). 육색은 L간(백색도)만이 등심부위가 유의적으로 가장 높게 나타났고(p<0.05) 다른 부위간에는 L값, a값(적색도)및 b값(황색도)에서 모두 유의적인 차이가 없는 것으로 나타났다(p>0.05). $1^{++}$ 등급 거세우고 기의 10부위의 가열감량을 분석한 결과 꾸리, 홍두깨, 우둔, 양지부위가 높게 나타난 반면에 채끝부위가 21.44%로 유의적으로 가장 낮게 나타났다(p<0.05). 전단력은 업진부위가 $6.24inch^2/kg$으로 가장 높게 나타났고 등심과 채끝부위가 각각 3.45 및 $3.50inch^2/kg$으로 가장 낮게 나타났다(p<0.05). 보수력은 10부위간에 유의적인 차이가 없는 것으로 나타났다(p>0.05). 총 아미노산 함량은 홍두깨 부위가 가장 높게 나타났으며 특히 methionine과 histidine을 제외한 필수아미노산이 풍부하게 함유되어 있는 것으로 나타났다. Methionine과 histidine은 우둔부위에 가장 높게 함유되어 있는 것으로 나타났다(p<0.05). 무기물 분석결과 10 부위간에 Ca 함량에는 유의적인 차이가 없었으나 Fe 함량은 15.09-26.68 mg/kg으로 포함되어 있었으며(p<0.05), Zn 함량은 꾸리부위가 50.56 mg/kg으로 10부위 중에서 가장 높게 함유되어 있었다.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.510-523
• /
• 2020

본 연구에서는 시설원예 농가 중 지하수 수질에 문제가 있는 농가와 지하수를 원활히 사용하는 농가의 수질 성분을 분석하고 비교하였다. 이를 통해, 국내 수경재배 시설을 대상으로 지하수 수질에 따라 양액 재배용 원수로 사용 가능성을 평가하였다. 지하수 수질에 문제가 없는 농가의 지하수는 평균적으로 pH 6.61, EC 0.27 dS/m, NO3-N 7.64 mg/L, NH4+-N 0.80 mg/L, PO4-P 0.09 mg/L, K+ 6.26 mg/L, Ca2+ 18.57 mg/L, Mg2+ 4.38 mg/L, Na+ 20.85 mg/L, Cl- 18.10 mg/L, S2- 7.97 mg/L, HCO3- 55.06 mg/L, Fe 0.09 mg/L, Mn 0.01 mg/L, Zn 0.04 mg/L, Cu 0.01 mg/L, B 0.04 mg/L, Si4+ 8.93 mg/L, Mo 0.01 mg/L로 나타났으며, 모두 양액 재배용 원수의 수질기준을 만족하였다. 반면, 지하수 수질에 문제가 있는 농가의 경우 대다수의 항목이 양액재배용 원수의 수질기준을 초과하였다. 이러한 성분분석 결과로 보아 작물재배에 적합하지 않은 수질의 지하수를 정수하여 원수로 사용하는 것은 지하수의 재충전, 토양정화 측면에서 효과가 있다고 판단된다. 본 연구결과를 바탕으로 농업용 정수시스템을 구성한다면 우선처리 대상 항목 및 연계 항목을 추측할 수 있어 설계가 용이할 것으로 판단된다. 또한 이러한 농업용 정수시스템을 정착시킨다면 시설원예 단지에서 직접 지하수를 사용하면서 재충전 및 재이용할 수 있고, 결과적으로 지속가능한 농업과 국토 정화에 이바지 할 수 있는 기본 정보를 제공한다.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.290-297
• /
• 2008

STATEMENT OF PROBLEM: Implant-supported fixed cantilever prostheses are influenced by various biomechanical factors. The information that shows the effect of implant number and position of cantilever on stress in the supporting bone is limited. PURPOSE: The purpose of this study was to investigate the effect of implant number variation and the effect of 2 different cantilever types on stress distribution in the supporting bone, using 3-dimensional finite element analysis. MATERIAL AND METHODS: A 3-D FE model of a mandibular section of bone with a missing second premolar, first molar, and second molar was developed. $4.1{\times}10$ mm screw-type dental implant was selected. 4.0 mm height solid abutments were fixed over all implant fixtures. Type III gold alloy was selected for implant-supported fixed prostheses. For mesial cantilever test, model 1-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 1-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 1-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with mesial cantilever were simulated. And then, 155N oblique force was applied to the buccal cusp of second premolar. For distal cantilever test, model 2-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 2-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 2-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with distal cantilever were simulated. And then, 206N oblique force was applied to the buccal cusp of second premolar. The implant and superstructure were simulated in finite element software(Pro/Engineer wildfire 2.0). The stress values were observed with the maximum von Mises stresses. RESULTS: Among the models without a cantilever, model 1-1 and 2-1 which had three implants, showed lower stress than model 1-2 and 2-2 which had two implants. Although model 2-1 was applied with 206N, it showed lower stress than model 1-2 which was applied with 155N. In models that implant positions of models were same, the amount of applied occlusal load largely influenced the maximum von Mises stress. Model 1-1, 1-2 and 1-3, which were loaded with 155N, showed less stress than corresponding model 2-1, 2-2 and 2- 3 which were loaded with 206N. For the same number of implants, the existence of a cantilever induced the obvious increase of maximum stress. Model 1-3 and 2-3 which had a cantilever, showed much higher stress than the others which had no cantilever. In all models, the von Mises stresses were concentrated at the cortical bone around the cervical region of the implants. Meanwhile, in model 1-1, 1-2 and 1-3, which were loaded on second premolar position, the first premolar participated in stress distribution. First premolars of model 2-1, 2-2 and 2-3 did not participate in stress distribution. CONCLUSION: 1. The more implants supported, the less stress was induced, regardless of applied occlusal loads. 2. The maximum von Mises stress in the bone of the implant-supported three unit fixed dental prosthesis with a mesial cantilever was 1.38 times that with a central pontic. The maximum von Mises stress in the bone of the implant-supported three-unit fixed dental prosthesis with a distal cantilever was 1.59 times that with a central pontic. 3. A distal cantilever induced larger stress in the bone than a mesial cantilever. 4. A adjacent tooth which contacts implant-supported fixed prosthesis participated in the stress distribution.

• Journal of Nutrition and Health
• /
• 제8권1호
• /
• pp.15-37
• /
• 1975

I. Subject of the study A study on the nutritive value and utilization of powdered seaweeds. II. Purpose and Importance of the study A. In Korea the shortage of food will be inevitable by the rapidly growing population. It will be very important study to develop a new food from the seaweeds which were not used hitherto for human consumption. B. The several kinds of seaweeds have been used by man in Korea mainly as side-dishes. However, a properly powdered seaweed will enable itself to be a good supplement or mixture to certain cereal flours. C. By adding the powdered seaweed to any cereals which have long been staple foods in this country the two fold benefits; saving of cereals and change of dietary pattern, will be secured. III. Objects and scope of the study A. Objects of the study The objects will come under four items. 1. To develop a powdered seaweed as a new food from the seaweeds which have been not used for human consumption. 2. To evaluate the nutritional quality of the products the analysis for chemical composition and animal feeding experiment will be conducted. 3. Experimental cocking and accepability test will be conducted for the powdered products to evaluate the value as food stuff. 4. Sanitary test and also economical analysis will be conducted for the powdered products. B. Scope of the study 1. Production of seaweed powders Sargassum fulvellum growing in eastern coast and Sargassum patens C.A. in southern coast were used as the material for the powders. These algae, which have been not used for human consumption, were pulverized through the processes of washing, drying, pulverization, etc. 2. Nutritional experiments a. Chemical composition Proximate components (water, protein, fat, cellulose, sugar, ash, salt), minerals (calcium, phosphorus, iron, iodine), vitamins (A, $B_1,\;B_2$ niacin, C) and amino acids were analyzed for the seaweed powders. b. Animal feeding experiment Weaning 160 rats (80 male and 80 female rats) were used as experimental animals, dividing them into 16 groups, 10 rats each group. Each group was fed for 12 weeks on cereal diet (Wheat flour, rice powder, barley powder, potato powder, corn flour) with the supplementary levels of 5%, 10%, 15%, 20% and 30% of the seaweed powder. After the feeding the growth, feed efficiency ratio, protain efficiency ratio and ,organs weights were checked and urine analysis, feces analysis and serum analysis were also conducted. 3. Experimental cooking and acceptability test a. Several basic studies were conducted to find the characteristics of the seaweed powder. b. 17 kinds of Korean dishes and 9 kinds of foreign dishes were prepared with cereal flours (wheat, rice, barley, potato, corn) with the supplementary levels of 5%, 10%, 15%, 20% and 30% of the seaweed powder. c. Acceptability test for the dishes was conducted according to plank's Form. 4. Sanitary test The heavy metals (Cd, Pb, As, Hg) in the seaweed powders were determined. 5. Economical analysis The retail price of the seaweed powder was compared with those of other cereals in the market. And also economical analysis was made from the nutritional point of view, calculating the body weight gained in grams per unit price of each feeding diet. IV. Results of the study and the suggestion for application A. Chemical composition 1. There is no any big difference in proximate components between powders of Sargassum fulvellum in eastern coast and Sargassum patens C.A. in southern coast. Seasonal difference is also not significant. Higher levels of protein, cellulose, ash and salt were found in the powders compared with common cereal foods. 2. The levels of calcium (Ca) and iron (Fe) in the powders were significantly higher than common cereal foods and also rich in iodine (I). Existence of vitamin A and vitamin C in the Powders is different point from cereal foods. Vitamin $B_1\;and\;B_2$ are also relatively rich in the powders.'Vitamin A in ·Sargassum fulvellum is high and the levels of some minerals and vitamins are seemed4 to be some influenced by seasons. 3. In the amino acid composition methionine, isoleucine, Iysine and valine are limiting amino acids. The protein qualities of Sargassum fulvellum and Sargassum patens C.A. are seemed to be .almost same and generally ·good. Seasonal difference in amino acid composition was found. B. Animal feeding experiment 1. The best growth was found at.10% supplemental level of the seaweed Powder and lower growth rate was shown at 30% level. 2. It was shown that 15% supplemental level of the Seaweed powder seems to fulfil, to some extent the mineral requirement of the animals. 3. No any changes were found in organs development except that, in kidney, there found decreasing in weight by increasing the supplemental level of the seaweed powder. 4. There is no any significant changes in nitrogen retention, serum cholesterol, serum calcium and urinary calcium in each supplemental level of the seaweed powder. 5. In animal feeding experiment it was concluded that $5%{\sim}15%$ levels supplementation of the seaweed powder are possible. C. Experimental cooking and acceptability test 1. The seaweed powder showed to be utilized more excellently in foreign cookings than in Korean cookings. Higher supplemental level of seaweed was passible in foreign cookings. 2. Hae-Jo-Kang and Jeon-Byung were more excellent than Song-Pyun, wheat cake, Soo-Je-Bee and wheat noodle. Hae-Je-Kang was excellent in its quality even as high as 5% supplemental level. 3. The higher levels of supplementation were used the more sticky cooking products were obtained. Song-Pyun and wheat cake were palatable and lustrous in 2% supplementation level. 4. In drop cookie the higher levels of supplementation, the more crisp product was obtained, compared with other cookies. 5. Corn cake, thin rice gruel, rice gruel and potato Jeon-Byung were more excellent in their quality than potato Man-Doo and potato noodle. Corn cake, thin rice gruel and rice gruel were excellent even as high as 5% supplementation level. 6. In several cooking Porducts some seaweed-oder was perceived in case of 3% or more levels of supplementation. This may be much diminished by the use of proper condiments. D. Sanitary test It seems that there is no any heavy metals (Cd, Pb, As, Hg) problem in these seaweed Powders in case these Powders are used as supplements to any cereal flours E. Economical analysis The price of the seaweed powder is lower than those of other cereals and that may be more lowered when mass production of the seaweed powder is made in future. The supplement of the seaweed powder to any cereals is also economical with the criterion of animal growth rate. F. It is recommended that these seaweed powders should be developed and used as supplement to any cereal flours or used as other food material. By doing so, both saving of cereals and improvement of individual's nutrition will greatly be achieved. It is also recommended that the feeding experiment for men would be conducted in future.

• Journal of Preventive Medicine and Public Health
• /
• 제26권1호
• /
• pp.110-125
• /
• 1993

본 연구는 범죄자의 경우 필수 금속원소와 독성금속의 함량에 기초하여 정상적 인구집단으로부터 구별될 수 있다는 가설을 검정하기 위해 시도되었다. 금속 원소함량 및 중금속함량의 차이를 알아보기 위해 두발을 채취하였으며, 아울러 이들 금속과 인성과의 관련성을 알아보기 위해 MMPI 검사를 시행하였다. 두발채취는 범죄자의 경우 유죄판결을 받은 직후 실시 하였으며, 후두부의 5cm 이내의 두발을 2g을 취하여 두발중 금속함량을 원자흡광분광광도계로써 측정 하였다. 두발 중 금속원소들의 함량을 비교해 오면 아연과 마그네슘이 비폭력범죄자에 있어 유의하게 낮았으며, 납과 카드뮴 비폭력범죄자군이 대조군에 비해 유의하게 높았다. 연령군별 함량차이를 보면 나트륨, 아연, 철, 마그네슘, 납에서 차이를 보이고 있으나 연령에 따른 어떠한 추세는 보이지 않았다. 연령군별로 층화하여 두 집단과의 차이를 보면 나트륨은 20대에서 비폭력범죄자군이 유의하게 높았으며 아연은 20대 30대 40대에서 마그네슘은 20대와 30대에 있어서 비폭력범죄자가 유의하게 낮았다. 반면 납과 카드뮴은 20대 30대 40대에서 비폭력범죄자군이 유의하게 높았다. MMPI의 각 척도별 T 점수중 우울증 척도(D)는 대조군이 유의하게 높았고, 반사회성 척도(Pd), 편집증 척도(Pa), 경조증 척도(Ma)의 척도에서는 비폭력군이 유의하게 높았다. 금속 금속함량과 MMPI의 각 척도별 T 점수와의 상관성을 보면 범죄자 군에서는 구리와 Ma 척도를 제외한 Hs D Hy Pd Mf Pa Pt Sc Si 척도의 점수와 통계적으로 유의한 음의 상관관계를 보이고 있으며 (P<0.05, p<0.01), 아연함량과 Hy Mf Pa Pt 척도의 점수가 음의 상관관계를 보이고 있다. 반면 대조군에서는 나트륨과 Ma 척도가 음의 상관관계를 철과 Sc척도, Pt척도는 양의 상관 관계를 보이고 있다. 본 연구의 결과로 볼때 비폭력범죄자와 정상 대조군 사이에서 일부 금속원소의 함량 차이가 있는 것으로 보여지며, 금속원소 함량과 MMPI 척도와도 상관관계가 있는 것으로 나타났다. 향후 폭력범과 비폭력범, 폭력범과 일반인과의 차이를 비교하여 볼 필요성을 느낀다.

• 원예과학기술지
• /
• 제32권4호
• /
• pp.484-492
• /
• 2014

'매향' 딸기를 재배하는 동안 비료의 종류와 농도를 변화시켜 시비하고 작물 생장과 양분 흡수량 변화에 미치는 영향을 구명하여 영양진단을 위한 기초자료를 확보하고자 본 연구를 수행하였다. 증류수를 원수로 산성, 중성 및 알칼리성 비료를 조제한 후 N 농도를 기준으로 100 및 $200mg{\cdot}L^{-1}$로, pH는 6.0-6.3으로 조절하여 100일간 시비하였다. 세 종류 비료의 농도를 $100mg{\cdot}L^{-1}$로 조절하여 시비한 경우 시비 100일 후 알칼리성 비료를 시비한 처리의 생장이 우수하고 산성비료를 시비한 처리에서 가장 저조하였다. 비료 농도를 $200mg{\cdot}L^{-1}$로 조절하여 시비한 경우 중성비료를 시비한 처리의 생체중 및 건물중이 산성이나 알칼리성 비료를 시비한 처리보다 무거웠다. 식물체 무기원소 함량을 분석한 결과 N, P 및 Na 함량은 중성비료 $200mg{\cdot}L^{-1}$ 처리에서 각각 2.20, 0.51 및 0.10%로, K은 산성비료 $200mg{\cdot}L^{-1}$ 처리에서 2.60%로, Ca은 알칼리성비료 $200mg{\cdot}L^{-1}$ 처리에서 0.95%로, Mg은 알칼리성비료 $100mg{\cdot}L^{-1}$ 처리에서 0.45%로 다른 처리 보다 높았다. Fe, Mn, Zn 및 Cu 함량은 산성비료를 시비한 처리에서 높았고, 알칼리성 비료를 시비한 처리에서 뚜렷하게 낮았다. 산성비료를 100 및 $200mg{\cdot}L^{-1}$, 그리고 중성 비료 $200mg{\cdot}L^{-1}$으로 시비한 처리의 근권부 pH가 지속적으로 낮아졌다. 근권부 무기원소 농도를 분석한 결과 산성 비료 $200mg{\cdot}L^{-1}$, 중성 비료 $200mg{\cdot}L^{-1}$, 그리고 산성 비료를 $100mg{\cdot}L^{-1}$으로 시비한 처리 순으로 근권부의 $NH_4{^+}$ 농도가 낮아졌다. Ca 및 Mg 농도는 시비 84일 후까지는 알칼리성 비료를 시비한 처리의 농도가 가장 낮고 중성 비료 및 산성비료 순으로 높아지는 경향이었다. $NO_3{^-}$ 농도는 산성비료에서 낮았고, 중성 및 알칼리성 비료의 순으로 높아졌으며, 세 종류 비료를 동일한 농도로 시비한 경우 $PO_4{^3}$ 농도가 유사한 경향을 보이며 변화하였다. 이상의 결과를 고려할 때 저농도에서는 알칼리성비료, 그리고 고농도에서는 중성비료가 영양생장중인 '매향' 딸기의 관비재배를 위해 효과적이었으며, 본 연구 결과는 '매향' 딸기의 번식을 위한 시비방법 개선을 위한 기초자료로 활용될 수 있을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권7호
• /
• pp.1067-1075
• /
• 2007

Twenty eight 3-4 month old castrated Black Bengal kids (Capra hircus) were used to determine the effects of source and level of dietary copper (Cu) concentration on their performance and nutrient utilization. Cu was supplemented (0, 10, 20 and 30 mg/kg diet DM) as copper sulfate ($CuSO_4$, $5H_2O$) or copper proteinate (Cu-P). Kids were fed a basal diet containing maize (19.5%), soybean (17.0%), deoiled rice bran (56.5%), molasses (4.0%), di-calcium phosphate and salt (1.0% each) and mineral and vitamin mixture (0.5% each) supplements at 3.5% of body weight to meet NRC (1981) requirements for protein, energy, macro minerals and micro minerals, excluding Cu. The basal diet contained 5.7 mg Cu/kg, 122.5 mg Fe/kg, 110 mg Zn/kg, 0.26 mg Mo/kg and 0.32% S. $CuSO_4$ or Cu-P was added to the basal diet at the rate of 10, 20 and 30 mg/kg. Kids were housed in a well ventilated shed with facilities for individual feeding in aluminum plated metabolic cages. Blood samples were collected from the jugular vein on d 0, 30, 60 and 90 to determine hemoglobin (Hb), packed cell volume (PCV), total erythrocyte count (TEC), total leukocyte count (TLC) and serum enzymes (alkaline phosphatase, alanine transferase and aspertate transferase). A metabolism trial of 6 days duration was conducted after 90 days of experimental feeding. Statistical analysis revealed that source and level of Cu supplementation improved live weight gain (p<0.04) and average daily gain (p<0.01). No significant contribution of source and level of Cu to alter serum serum enzymes was evident. Goats fed Cu-P tended to have higher Hb, PCV and TEC than with $CuSO_4$ supplementation. Cu-P increased digestibility of ether extract (EE, p<0.02) and crude fiber (p<0.05) and showed an increasing trend (p<0.09) for digested crude protein (CP) and crude fiber (CF). Supplemental dose of Cu linearly improved (p<0.02) digestibilities of dry matter (DM), organic matter (OM), EE and nitrogen free extract (NFE). Though the absorption of nitrogen (N) was not affected (p>0.10) by both source and dose of Cu, N retention was affected (p<0.04) and there was a significant $Source{\times}Dose$ interaction (p<0.05). Final body weight (BW) was not influenced (p>0.10) by the source of Cu but increasing dose of Cu increased (p<0.04) the BW of kids. TDN intake (g/kg $W^{0.75}$) was higher (p<0.05) with the increased dose of Cu and there was a significant $Source{\times}Dose$ interaction. It was concluded that supplementation of Cu from different sources and varying dose level in a concentrate based diet may improve performance, nutrient utilization and plane of nutrition in castrated Black Bengal kids. The effects on performance and nutrient utilization are more pronounced with Cu-P than $CuSO_4$ supplementation. Higher dose of Cu showed better result than lower dose.

• 한국대기환경학회지
• /
• 제22권5호
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.