• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.155-162
• /
• 2020

In this paper, we present a radiation compensation method and experiment method for two-dimensional direction finding by elevation and azimuth angles of broadband GPS signal, and then produce experimental results. Previous studies have performed direction finding by only using the azimuth angle of the detected signal. So, the compensation table utilizes compensation data by azimuth angles only. However, the presented method in this study has compensation data by azimuth and elevation angles for two-dimensional direction finding. Because of direction finding systems and applications are diversified, recently. So, we present a two-dimensional radiation compensation method. For evaluation of the presented compensation method, we calculate the ideal phase differences on the antenna for two-dimensional direction finding and simulate phase differences using a FEKO EM simulator. Subsequently, we analyze experimental data by radiation compensation experiments using the presented compensation method in an anechoic chamber.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.199-209
• /
• 2010

The locking compression plates-distal femur(LCP-DF) are being widely used for surgical management of the extra-articular complex fractures of the distal femur. They feature locking mechanism between the screws and the screw holes of the plate to provide stronger fixation force with less number of screws than conventional compression bone plate. However, their biomechanical efficacies are not fully understood, especially regarding the number of the screws inserted and their optimal configurations. In this study, we investigated effects of various screw configurations in the shaft and the condylar regions of the femur in relation to structural stability of LCP-DF system. For this purpose, a baseline 3-D finite element (FE) model of the femur was constructed from CT-scan images of a normal healthy male and was validated. The extra-articular complex fracture of the distal femur was made with a 4-cm defect. Surgical reduction with LCP-DF and bone screws were added laterally. To simulate various cases of post-op screw configurations, screws were inserted in the shaft (3~5 screws) and the condylar (4~6 screws) regions. Particular attention was paid at the shaft region where screws were inserted either in clustered or evenly-spaced fashion. Tied-contact conditions were assigned at the bone screws-plate whereas general contact condition was assumed at the interfaces between LCP-DF and bone screws. Axial compressive load of 1,610N(2.3 BW) was applied on the femoral head to reflect joint reaction force. An average of 5% increase in stiffness was found with increase in screw numbers (from 4 to 6) in the condylar region, as compared to negligible increase (less than 1%) at the shaft regardless of the number of screws inserted or its distribution, whether clustered or evenly-spaced. At the condylar region, screw insertion at the holes near the fracture interface and posterior locations contributed greater increase in stiffness (9~13%) than any other locations. Our results suggested that the screw insertion at the condylar region can be more effective than at the shaft during surgical treatment of fracture of the distal femur with LCP-DF. In addition, screw insertion at the holes close to the fracture interface should be accompanied to ensure better fracture healing.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.240-247
• /
• 2006

Piezoelectric sensor-based health monitoring technique using a two-step support vector machine (SYM) classifier is discussed for damage identification of a railroad track. An active sensing system composed of two PZT patches was investigated in conjunction with both impedance and guided wave propagation methods to detect two kinds of damage of the railroad track (one is a hole damage of 0.5cm in diameter at web section and the other is a transverse cut damage of 7.5cm in length and 0.5cm in depth at head section). Two damage-sensitive features were extracted one by one from each method; a) feature I: root mean square deviations (RMSD) of impedance signatures and b) feature II: wavelet coefficients for $A_0$ mode of guided waves. By defining damage indices from those damage-sensitive features, a two-dimensional damage feature (2-D DF) space was made. In order to minimize a false-positive indication of the current active sensing system, a two-step SYM classifier was applied to the 2-D DF space. As a result, optimal separable hyper-planes were successfully established by the two-step SYM classifier: Damage detection was accomplished by the first step-SYM, and damage classification was also carried out by the second step-SYM. Finally, the applicability of the proposed two-step SYM classifier has been verified by thirty test patterns.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.4
• /
• pp.260-266
• /
• 2006

Objectives : Synapsin III near VCFS region on chromosome 22q affects. It could be an interesting candidate gene for schizophrenia. D22S280 is a highly polymorphic genetic marker residing in synapsin III. We examined association of D22S280 marker on synapsin III with Korean patients with schizophrenia. Methods : The subjects were 46 male Korean patients with schizophrenia and 60 male normal controls. Using polymerase chain reaction, gel electrophoresis, ABI 310 genetic analyzer, and GeneScan Collection 3.1 software, we confirmed genotypes of D22S280 marker. We examined Hardy-Weinberg equilibrium and case-control association using SAS/Genetic 9.1.3. Results : Genotypes of both schizophrenia and control groups were in Hardy-Weinberg equilibrium. We could not find any significant statistical differences in allele-wise(${\chi}^2$=10.4, df=6, p=0.098) and genotype-wise (${\chi}^2$=22.1 df=19, p=0.258) analyses of D22S280 marker between schizophrenia and normal controls. Individual allele analyses with df=1 showed significant differences in A1(p=0.025) and A7(p=0.034) allele, which were not significant following Bonferroni corrections(A1:p=0.177, A7:p=0.235). Conclusion : We couldn't find any association between schizophrenia and the synapsin III gene. Given the small number of subjects studied, further investigations are needed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.169-179
• /
• 2000

The purpose of this study is to develop the system which convert the optical difference of teeth texture between intact enamel and incipient caries lesion into shade difference by laser fluorescence and to develop new and simple caries activity test using laser fluorescence. The experimental design of this study consists of three parts. In first part, a new method for the in vitro assessment of changes in initial enamel caries lesion of Bovine teeth using laser fluorescence is tested. In second part, in vivo assessment undertaken. Number of teeth which showed incipient carious lesion on buccal surface examined by laser fluorescence was compared with the caries activity test of $Cariescreen^{(R)}$ test and other oral environmental test of dDfFtT. In third part, new caries activity test measured by laser fluorescence was developed on the basis of above results and evaluated the sensitivity, specificity, and diagnostic power. Optical density measured by laser fluorescence was increased as increasing the depth of incipient carious lesion and showed high correlation$(\gamma=0.7015)$ with lesion depth. Optical density showed direct proportion to lesion depth. Linear equation was obtained between the optical density and the lesion depth by regression analysis. The result of caries activity test with laser fluorescence showed high correlation with those of $Cariescreen^{(R)}$ test and dDfFtT examination. Caries activity test with laser fluorescence showed 48% of sensitivity, 52% of specificity, and 45% of diagnostic power on the basis of dDfFtT examination, and also showed 48% of sensitivity, 51% of specificity, and 36% of diagnostic power on the basis of $Cariescreen^{(R)}$ test. In regard above result, caries activity test with laser fluorescence considered to be reliable for caries activity test compared with other oral environmental test. and it was also considered to be practical because it would be simple, inexpensive, and time saving method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3431-3445
• /
• 2017

Due to the advantages of low transmit power consumption, high spectral efficiency and extended system coverage, Device-to-Device (D2D) communication has drawn explosive attention in wireless communication field. Considering that intra-cell interference caused between cellular signals and D2D signals, in this paper, a network coding-based D2D relay cooperative transmission algorithm is proposed. Under D2D single-hop relay transmission mode, cellular interfering signals can be regarded as useful signals to code with D2D signals at D2D relay node. Using cellular interfering signals and network coded signals, D2D receiver restores the D2D signals to achieve the effect of interference suppression. Theoretical analysis shows that, compared with Amplify-and-forward (AF) mode and Decode-and-forward (DF) mode, the proposed algorithm can dramatically increase the link achievable rate. Furthermore, simulation experiment verifies that by employing the proposed algorithm, the interference signals in D2D communication can be eliminated effectively, and meanwhile the symbol error rate (SER) performance can be improved.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.217-222
• /
• 1985

The yield responses of three isogenic lines in plant type of paddy rice(open-, spread- and broom-type) as affected by combined treatments of transplanting densities (47.62, 22.22, 15.15, 11.11 and 8.33 hills per sq. meter) and rates of fertilizer application (0, 0.5, 1.0 and 1.5 folds of standard rate) were studied by using of the partial differentiations by planting density(D):df(D,F)/dD, fertilizer rate(F):df(D,F)/dF, and their interaction(DXF):d$^2$ f(D,F)/dDdF from the multiple regression polynominal equations. Under the condition of wider planting, the broom-type showed most prominent and sensitive responses in yield among others. Also the action of transplanting density in the broom-type were positive both at lower and higher densities. Under the lower densities, the broom-type represented positive actions both at lower and higher rates of fertilizer application. Whereas the interactions between the density and fertilizer rate under the lower densities were rather negative. To achieve the labor-saving by lower transplanting density(11-14 hills per sq. meter), the amount of fertilizer rates were estimated as 1.3-1.5 folds much of the standard in the open-type, whereas more than 1.5 folds in the broom-type. Thus, the potentials to absorb more amounts of fertilizer may explain the compensating function of the broom-type for equivalent yields of the standards at reduced transplanting densities.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.2
• /
• pp.187-198
• /
• 1997

This experiment was conducted to evaluate effects of wilting and additives on fermetation characteristics, quality and aerobic stability of silage of rye(Seca1e cereale L.) harvested at the early heading stage. Harvested rye was wilted or mixed with beet pulp and then treated with formic acid or lactic acid bacteria(LAB) inoculant. Treatments were consisted of direct cut(DC), wilted(WT), beet pulp added(BP), direct cut and formate applied(DF), wilted and formate applied(WF), beet pulp and formate applied(BF), direct cut and LAB inoculated(DL), beet pulp added and LAB inoculated(BL), and wilted and LAB inoculated(WL) silages. Afler 70 days of ensiling period, the silages were opened and exposed to air for 7 days, and the silages of opening day(0 day) were compared with the silages exposed to air for 7 days(7 day). 1. LAB inoculated rye silages(DL, WL, BL) lowered pH values effectively eom the third day of ensiling and showed most stable pattern of pH changes during the initial fermentation process. Direct cut and formate applied(DF), beet pulp and formate applied(BF) and beet pulp added(BP) silages were also effective in lowering pH from the seventh day thai direct cut treatment(DC). 2. pH was low below 3.7 in all treatments of 0 day. After 7-day period of aerobic exposure, DL and WL showed considerable increases in pH from 3.5 and 3.4 to 8.3 and 6.4, respectively. 3. Direct cut rye silages(DF, DC, DL) and beet pulp and formate treatment(BF) produced effluent of 121.2, 85.9, 80.3 and 34.2 mlkg, respectively and these were greater than others(P<0.01). Beet pulp retained 1.61 I/kg of effluent at the application rate of 50 kg/t in comparing BP with DC, and formate application increased the amount of effluent in comparing DF and BF with DC and BP, respectively(P<0.01). 4. Beet pulp and LAB treatment(B1) was highest in content of lactate as 3.1% and formate treated silages(DF, WF, BF) showed lower content of lactate and total acid than others. LAB inoculated(D1, WL, BL) and wilted (WT) silages were graded to be good quality as a second group by the Flieg's score. Formate applied silages (DF, WF, BF) were graded as a foum group lower than DC by one. 5. Residual content of WSC of rye silage was higher in BP, BF, DL and BL than direct cut treatment(M3) (P< 0.01). Formate application had a tendency to increase the content of residual content of WSC. 6. For the ratio of NH3-N to Total N, wilted and LAB inoculated(W1) and direct cut and LAB inoculated(D1) silages were lowest on 0 day as 8.9 and 9.3% respectively. But after 7-day period of aerobic exposure, WL and DL showed largest increase of the ratio of $NH_3-N$ to Total N from 0 day(P<0.01). 7. On 0 day wilted(WT), beet pulp and formate treatment(BF), and beet pulp and LAB treatment(B1) were lower than direct cut treatment(DC) for NDF and ADF concentrations consistently. Formate applied silages (DF, WF, BF) made little change in ADF and NDF concentrations during 7 day period of aerobic exposure. DL and WL showed a large increase in ADF and NDF concentrations under aerobic condition(P<0.01). 8. IVDMD values of wilted(WT), beet pulp added(BP), wilted and LAB inoculated(W1) and beet pulp added and LAB inoculated(B1) silages were higher than direct-cut treatmentPC) as 84.7, 84.7, 84.4 and 83.0%, respectively on 0 day. But during 7-day period of aerobic exposure, a great decreae in IVDMD of WL was showed(P<0.01). The experimental results indicate that wilted silage(WT) could be recommended as the most effective treatment for reducing efluent and increasing quality and feed value of rye silage without deteriorating aerobic stability more than direct cut treatment(DC). Additionally, under unfavorable weather condition beet pulp added and LAB inoculated treatment(T3L) might be the possible alternative for successful ensiling of forage rye.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.765-772
• /
• 2011

In this paper, a simulation-based method is presented to dispose direction finders in three dimensional space for locating targets using the directional data. A direction finder(DF) is a military weapon that is used to find locations of targets that emit radio frequencies by operating two or more DFs simultaneously. If one or more DFs are operated in the air, the accuracy of location estimation can be enhanced by disposing them in a better configuration. By extending the line method, which is a well-known algorithm for 2-D location estimation, into 3-D space, the problem of 3-D location estimation is defined as an nonlinear programming form and solved analytically. Then the optimal disposition of DFs is considered with the presented method in which methods of simulation and search technique are combined. With the suggested algorithm for 3-D disposition of DFs, regions in which targets exist can be effectively covered so that the operation effect of DF be increased.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.47-55
• /
• 1970

In order to approach a reasonable method for the indirect estimation of the productivity in terrestrial plants, allometric method was studied with herbs, such as Boenmeria frutescens and Hibiscus mutabilis, and scrubs, such as Robinia pseud oacacia and Morus alba f. Hchiroe. Allometric relations between D230H, square of the stem(or shoot) diameter(D30) on 30cm height above ground multiplied by stem length(H), and the amount of the stem(Ws), orof the leaves per stem, were fitted to each material plant with linear regression. The allometric coefficient in relation of D230H to Ws was approximated between scrubs having different life form, and the allometric function in relation of DF2 to WL was common between herbs in spite of having different growth habitat. As the allometries between D230H and Ws or WL were changeable with the seasonal change it funciton should be calculated repeatedly whenever investigating the standing crop of such community. It is able to utilize an indirect value of D30 obtained from the allometry between D30 and H because direct measurement of D30 in the field is accompanied by troublesome and waste of much time.