• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.206-214
• /
• 2017

SnS films have been prepared by electrodeposition technique onto Cu and ITO substrates using acidic solutions containing tin chloride and sodium thiosulfate with sodium citrate as an additive. The effects of sodium citrate on the electrochemical behavior of electrolyte bath containing tin chloride and sodium thiosulfate were investigated by cyclic voltammetry and chronoamperometry techniques. Deposited films were characterized by XRD, FTIR, SEM, optical, photoelectrochemical, and electrical measurements. XRD data showed that deposited SnS with sodium citrate on both substrates were polycrystalline with orthorhombic structures and preferential orientations along (111) directions. However, SnS films with sodium citrate on Cu substrate exhibited a good crystalline structure if compared with that deposited on ITO substrates. FTIR results confirmed the presence of SnS films at peaks 1384 and $560cm^{-1}$. SEM images revealed that SnS with sodium citrate on Cu substrate are well covered with a smooth and uniform surface morphology than deposited on ITO substrate. The direct band gap of the films is about 1.3 eV. p-type semiconductor conduction of SnS was confirmed by photoelectrochemical and Hall Effect measurements. Electrical properties of SnS films showed a low electrical resistivity of $30{\Omega}cm$, carrier concentration of $2.6{\times}10^{15}cm^{-3}$ and mobility of $80cm^2V^{-1}s^{-1}$.

• Animal Systematics, Evolution and Diversity
• /
• 제19권2호
• /
• pp.167-176
• /
• 2003

한국산 초파리아속에 속하는 quinaria section 7종 (D. angularis, D. brachynephros, D. curvispina, D. kuntzei, D. nigromacula ta, D. takadai, D. unispina)과 virilis section 3종(D. virilis, D. tsigana, D. lacertosa)을 대상으로 형태적 수리분석을 실시하여 종간 계통학적 유연관계를 알아보았다. 집괴분석과 분지분석을 실시한 결과 초파리아속 10종은 D. virilis, D. tsigana, D. lacertosa의 제1군과 D. angularis, D. brachynephros, D. curvispina, D. kuntzei, D. nigromaculata, D. takadai, D. unispina 제2군으로 나눌 수 있다. 집괴분석 결과 제2군은 3개의 아군 즉, D. angularis와 n. brachynephros가 집괴된 후에 D. unispina가 집괴되는 아군과, D. curvispina와 D. takadai가 집괴된 후에 D. kuntzei가 집괴되는 아군, 그리고 D. nigromaculata 아군으로 나눌 수 있다. 그리고 D. virilis와 D. lacertosa가 가장 먼저 분지된 종이었으며, D. tsigana가 그 다음이었다. D. virilis가 속한 제1군은 제2군보다 더 먼저 파생되었다고 할 수 있으나, 제1군이 제2군의 직접적인 조상형은 아니고 다른 조상형이 있었을 것이며, 제2군에서는 D. nigromaculata가 가장 먼저 파생되었고, D. kuntzei가 가장 늦게 파생되었다고 생각된다.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.105-114
• /
• 2013

This study investigated the application and the change of various architectural models by analyzing expression viewpoint media, which were applied to the visual information of digitalized 3D contemporary architectural models. The purpose of this study was to specify how modern architects have changed 3D architectural models to conceptual, logical, and formational visual information in the process of design. This study discovered a framework of analyses by theoretically investigating a relationship between expression media and expression change in the process of visualizing architectural models. Using the framework of analyses, this study analyzed how the expression viewpoints of architectural model information have been changed and applied. The transformation media of the visual information of digitalized 3D architectural models can be classified into conceptual, analytical, and formational information: 1) Contemporary architects used author-centered subjective viewpoints to express architectural concepts, which were generated in the process of their design. They selected a perspective viewpoint and a bird's eye view in order to present their architectural concepts and to depict them with one architectural model by expanding the visual scope of conceptual information. 2) Contemporary architects adopted observer-centered objective bird's eye view expression media to effectively present their architectural information to building owners and viewers. They used transformal media, which integrate architectural information into 3D and change it to different scales, in order to express their architecture logically. 3) Contemporary architects delivered model information about the generation and change of forms by expressing the image of a project from an author-centered viewpoint, instead of objectively defining formational information. They explained the generation principle of architectural forms via transformal media which develop and rotate an architectural model.

• 아시안잔디학회지
• /
• 제10권3호
• /
• pp.213-230
• /
• 1996

A study of occurrence and distribution of cellular slime molds(CSMs) in forest soils of central areas of Korea was carried out. Samples for CSMs isolation were collected from 4 study sites; Mt.Kyeryong, Mt. Taebaek, Mt. Sobaek and Mt. Sokri. In Mt. Kyeryong, six species were found. These were Dictyostelium fasciculatum, D.firmibasis, D. mucoroides, D. minutum, D. brefeldianum and Polysphondylium pallidum. The average number of species isolated at one site was 0.75, and average density(clones /g soil) was 292. The results of soil sample analyses were that the concentration of Pb was higher than any other areas. In Mt. Taebaek, seven species were found; D. fasciculatum, D.firmibasis, D. mucoroides, D. miuutum, P.pallidum. P. violaceum, P. candidum. The average number of species isolated at one site was 2.3,and average density was 1,108. Based on importance values calculated from study sites within each of three elevation ranges, several of the more widely distributed and abundant species have distribution patterns that show a response to elevation. In Mt. Sobaek, eleven species were found. These were D. fasciculatum. D.firmibasis, D. mucoroides, D. miuutum, D. brefeldianum, D. crassicaule,D. deminutivum, D. implicatum, P. pallidum. P. violaceum and P. candidum. The average number of species isolated at one site was 3, and average density was 793. Species diversity appeared to be the highest in this area. In Mt. Sokri, six species were found. These were D. fasciculatum. D. mucoroides, D. minutum, D. purpureum, P. pallidum. and P. violaceum. The average number of species isolated at one site was 2.4 and average density was 858. It was noticeable that D.purpureum were much more comrnonly found in this pinus evergreen forest. Key words: Cellular slime molds(CSMs), Importance value, Elevation, Average number of species, Average density.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.295-308
• /
• 2018

The excavation of twin tunnels is a process that destabilizes the ground. The stability of the tunnel lining, the control of ground displacements around the tunnel resulting from each excavation and the interaction between them must be controlled. This paper provides a new approach for replacing the costly 3D analyses with the equivalent 2D analyses that closely reflects the in-situ measurements when excavating twin tunnels. The modeling was performed in two dimensions using the FLAC2D finite difference code. The three-dimensional effect of excavation is taken into account through the deconfinement rate ${\lambda}$ of the soil surrounding the excavation by applying the convergence-confinement method. A comparison between settlements derived by the proposed 2D analysis and the settlements measured in a real project in Algeria shows an acceptable agreement. Also, this paper reports the investigation into the changes in deformations on tunnel linings and surface settlements which may be expected if the twin tunnels of T4 El-Harouche Skikda were constructed with a tunneling machine. Special attention was paid to the influence of the excavation phase shift distance between the two mechanized tunnel faces. It is revealed that the ground movements and the lining deformations during tunnel excavation depend on the distance between the tunnels' axis and the excavation phase shift.

• 대한인간공학회지
• /
• 제33권4호
• /
• pp.299-311
• /
• 2014

Objective: The aim of this study was to develop a method for measuring breast size from three-dimensional (3D) body scan image data. Background: Previous bra studies established reference points by directly contacting the subject's naked skin to determine the boundary of the breast. But some subjects were uncomfortable with these types of measurements. This study examined noncontact methods of extracting breast reference points from 3D body scan data that were collected while subjects were wearing standardized soft bras. Method: 3D body scan data of 32 Korean women were analyzed. The subjects were selected from the Size Korea 2010 study. The breast landmarks were identified by graphic analyses of slicing contour lines on 3D body scan data. Results: Three methods determining bra cup size were compared. The M1 and M2 methods determined cup size by calculating the difference between bust girth and under-bust girth. The M3 method determined bra cup size by measuring breast arc length. Conclusion: The researchers proposed an anthropometric bra cup sizing system with the breast arc length (M3 method). It was measured from the geometrically defined landmarks on the 3D body scan slicing contour lines. The new bra cup size was highly correlated with breast depth. Application: The noncontact measuring method used in this study can be applied to the ergonomic studies measuring sensitive body parts.

• 한국위성정보통신학회논문지
• /
• 제3권2호
• /
• pp.54-59
• /
• 2008

Traditionally R&D evaluation has been performed by experts who can understand the contents of the study area very well. Recently extensive application of quantitative evaluation methods have been attempted for introducing the administrative management system that poses greater importance on records and results. More objective reviews on the R&D outcomes are called for gaining public supports. In this paper a bibliometrical analysis is to be performed to evaluate satellite communication and broadcasting public R&D outcomes for last 7 years. Data envelopment analysis method is selected for evaluating the efficiencies of multiple outputs (papers, patents, royalties, technology transfers) where multiple inputs (number of researchers and R&D expenses) are given. R&D outcomes from 22 research institutes are being compared and satellite communication and broadcasting R&D efforts turn out to be highly efficient.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.97-101
• /
• 2022

In this study we investigated the gas to solid heat transfer of bubbling fluidized bed bottom ash cooler installed at the Donghae power plant in South Korea. Several different analyses are done through 1-D calculations and 3-D CFD simulation to predict the bottom ash exit temperatures when it exits the ash cooler. Three different cases are set up to have consideration of unburnt carbon in the bottom ash. Sensible heat comparison and heat transfer calculation between the fluidization air and the bottom ash are conducted and 3-D CFD analysis is done on three cases. We have obtained the results that the bottom ash with unburnt carbon is exiting the ash cooler, exceeding the targeted temperature from both 1-D calculation and 3-D CFD simulation.

• 한국버섯학회지
• /
• 제20권4호
• /
• pp.187-192
• /
• 2022

Wolfiporia cocos is an edible fungus commercially cultivated in Asia. To investigate metabolic changes of W. cocos mycelia under both light and dark culture conditions, gas chromatography mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC) analyses were performed. In terms of the total amount of sugars, alcohols, amino acids, organic acids, fatty acids, and purines, there no significant differences between the W. cocos mycelia cultivated under light (L) or dark (D) conditions (p < 0.05). However, there were some differences with respect to the production of particular sugars and proteins. The levels of trehalose (L: 17.2 ± 0.3% vs. D: 13.9 ± 1.6%), maltose (L: 0.9 ± 0.1% vs. D: 0.3 ± 0.1%), turanose (L: 0.7 ± 0.2% vs. D: 0.1 ± 0.1%), glutamine (L: 1.6 ± 0.3% vs. D: 0.7 ± 0.2%), and proline (L: 0.3 ± 0% vs. D: 0.1 ± 0%) were all significantly higher under light condition (p < 0.05). In contrast, the levels of galactose (L: 13.7 ± 1.2% vs. D: 17.6 ± 2.0%), aspartic acid (L: 0.6 ± 0.1 % vs. D: 0.9 ± 0.1%), cystathionine (L: 0.6 ± 0.1% vs. D: 0.8 ± 0 %), and malic acid (L: 0.7 ± 0.1% vs. D: 1.2 ± 0.1%) were higher under the dark condition. It is worth noting that the amount of pachymic acid, a pharmaceutically active compound of W. cocos, was 1.68 times greater under the light condition (p < 0.05).

• Advances in aircraft and spacecraft science
• /
• 제1권3호
• /
• pp.291-310
• /
• 2014

An advanced model for the linear flutter analysis is introduced in this paper. Higher-order beam structural models are developed by using the Carrera Unified Formulation, which allows for the straightforward implementation of arbitrarily rich displacement fields without the need of a-priori kinematic assumptions. The strong form of the principle of virtual displacements is used to obtain the equations of motion and the natural boundary conditions for beams in free vibration. An exact dynamic stiffness matrix is then developed by relating the amplitudes of harmonically varying loads to those of the responses. The resulting dynamic stiffness matrix is used with particular reference to the Wittrick-Williams algorithm to carry out free vibration analyses. According to the doublet lattice method, the natural mode shapes are subsequently used as generalized motions for the generation of the unsteady aerodynamic generalized forces. Finally, the g-method is used to conduct flutter analyses of both isotropic and laminated composite lifting surfaces. The obtained results perfectly match those from 1D and 2D finite elements and those from experimental analyses. It can be stated that refined beam models are compulsory to deal with the flutter analysis of wing models whereas classical and lower-order models (up to the second-order) are not able to detect those flutter conditions that are characterized by bending-torsion couplings.