• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1133-1153
• /
• 2016

In this article, an additive performance ratio method using structural analysis of both 2D and 3D is introduced to mitigate the complexity of work evaluating structural performances of numerous steel outrigger alternatives in multi-story buildings, especially high-rise buildings. The combined structural analysis process enables to be the design of economic, safe, and as constructional demanding structures by exploiting the advantages of steel, namely: excellent energy dissipation and ductility. First the approach decides the alternative of numerous steel outriggers by a simple 2D analysis module and then the alternative is evaluated by 3D analysis module. Initial structural analyses of outrigger types are carried out through MIDAS Gen 2D modeling, approximately, and then the results appeal structural performance and lead to decide some alternative of outrigger types. ETABS 3D modeling is used with respect to realization and evaluation of exact structural behaviors. The approach reduces computational burden in compared to existing concepts such as full 3D analysis methods. The combined 2D and 3D tools are verified by cycle and displacement tests including comprehensive nonlinear dynamic simulations. The advantages and limitations of the Additive Performance Ratio Approach are highlighted in a case study on a high rise steel-composite building, which targets at designing the optimized alternative to the existing original outrigger for lateral load resisting system.

• Reproductive and Developmental Biology
• /
• 제33권3호
• /
• pp.119-123
• /
• 2009

The two dimensional quantitative structure-activity relationships (2D-QSARs) models concerning the binding affinity constants ($p[Od.]_{50}$) between 2-cyclohexyltetrahydropyrane and 2-cyclohexyltetrahydrofurane analogues as substrates, and bovine odorant binding protein (bOBP) as receptor were derived by multiple regression analyses method and discussed. The statistical quality of the optimized 2D-QSAR model (5) was good (r=0.907). From the model, the binding affinity constants ($p[Od.]_{50}$) were dependent upon the optimal value ($(TL)_{opt.}$=2.737) of total lipole (TL) of substrate molecules. Based on these findings, the high active compounds predicted by optimized 2D-QSAR model (5) were 2-(dimethylcyclohexyl)tetrahydropyrane molecule and their isomer molecules. The binding affinity constants regarding bOBP of the tetrahydrofuryl-2-yl family compounds were dependent upon the hydrophobicity (logP) of whole substrate molecules. In any case of porcine odorant-binding proteins (pOBP), the constants were dependent upon the hydrophobicity (${\pi}x={\log}P_X-{\log}P_H$) of substituents (R) in substrate molecules. Also, from the optimal values of hydrophobic constant, the hydrophobicity for bOBP influenced ca. twice time bigger (bOBP>pOBP) than that for pOBP.

• 한국철도학회논문집
• /
• 제3권2호
• /
• pp.92-99
• /
• 2000

Composites are very useful material for light train carbody due to its high specific strength and lightweight characteristics. The composites, called 3-D board, are developed with a special stitching method. In this process, the glass fiber fabrics of skin material and foam core material are stitched together with glass fiber thread. The glass thread in Z-axis turns into FRP form. The conventional delamination problem can be solved with 3-D sandwich structure. In addition, with the lower density of foam, the weight of the panel and the operation expenses can be highly reduced. To evaluate the usefulness of the 3-D board, the double-deck light train carbody is studied. The stress analyses are carried out under various loads and boundary conditions with FEM Code, ANSYS. On comparing with the aluminum carbody, 3-D board carbody can be reduced by about 2 ton for the total weight of carbody.

• 한국건축시공학회지
• /
• 제22권3호
• /
• pp.269-280
• /
• 2022

건축물이 재산적 가치가 높아지면서, 국내외에서 실내 건축공사를 많이 하는 추세이다. 실내 건축공사는 물량 산출 및 적산까지 가능한 BIM 모델링의 기술까지 발전하였다. 실제 현장에서 반영하기에는 부담스러운 금액과 공정에 따라, 2D 도면과 3D 모델링을 통하여 진행하는 추세이다. 2D 도면과 3D 모델링은 서로 장단점이 존재하여 각 실내 건축공사에서는 시공 중 하자가 발생하고 있다. 실질적인 문제를 파악하기 위해 실내 건축공사의 현장 문제점, 2D 도면분석, 3D 모델링 분석, 사전 리스크 요인을 분석하였다. 문제점 분석 결과 1) 발주자와 의사소통 2) 노무자와 의사소통 3) 도면의 이해 등 여러 가지 문제점이 도출되었다. 본 연구에서는 이를 해결 할 수 있는 실내 건축공사 품질향상 체크리스트 제안을 하였다.

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.28-34
• /
• 2017

유한요소해석을 이용하여 이물질이 고무 오링과 구조물에 미치는 영향과 성능을 연구했다. 오래전부터 2D 해석을 이용하여 초탄성 오링을 연구해왔다. 오링 설계 시, 접촉응력은 중요한 설계 요소이다. 접촉 응력이 가해진 압력보다 낮으면 누수, 진동, 소음, 출력 저하의 원인이 된다. 이 연구에서는 초탄성 오링을 2D와 3D로 해석하고 결과를 비교한다. 2D와 3D의 접촉 응력 결과는 거의 비슷하게 나타난다. 이물질이 있는 오링은 3D로 모델링해야하는데 모든 방향의 접촉 응력을 고려해야하기 때문이다. 3D 해석에서 간극을 달리하여 10가지 경우로 나누어 이물질이 오링과 구조물에 미치는 영향을 확인했다. 또한 접촉 응력이 가해진 압력보다 높은지 확인하였다. 따라서, 이물질이 포함된 오링은 3D 모델로 해석되어야하며 이러한 결과는 오링 설계에 포함된다.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3543-3562
• /
• 2021

The methods and performance of a 3D pin-by-pin neutronics code based on the 2D/1D decoupling method are presented. The code was newly developed as an effort to achieve enhanced accuracy and high calculation performance that are sufficient for the use in practical nuclear design analyses. From the 3D diffusion-based finite difference method (FDM) formulation, decoupled planar formulations are established by treating pre-determined axial leakage as a source term. The decoupled axial problems are formulated with the radial leakage source term. To accelerate the pin-by-pin calculation, the two-level coarse mesh finite difference (CMFD) formulation, which consists of the multigroup node-wise CMFD and the two-group assembly-wise CMFD is implemented. To enhance the accuracy, both the discontinuity factor method and the super-homogenization (SPH) factor method are examined for pin-wise cross-section homogenization. The parallelization is achieved with the OpenMP package. The accuracy and performance of the pin-by-pin calculations are assessed with the VERA and APR1400 benchmark problems. It is demonstrated that pin-by-pin 2D/1D alternating calculations within the two-level 3D CMFD framework yield accurate solutions in about 30 s for the typical commercial core problems, on a parallel platform employing 32 threads.

• 대한공간정보학회지
• /
• 제15권3호
• /
• pp.27-32
• /
• 2007

도시의3차원적인 성장 및 건물의 대형화, 복잡화에 따라 3차원 정보에 대한 요구가 증가하고 있다. 이와 더불어 위치기반안내, 경로탐색 또는 비상탈출 등과 같은 유비쿼터스 컴퓨팅의 기초데이터로써 3차원 GIS의 활용에 대한 관심 또한 증가하고 있다. 반면에 대부분의3차원 모델링 기술은 건물이나 지형의 시각적인 표현에 초점을 맞추고 있으며 공간분석에서 요구되는 위상구조는 갖고 있지 않다. 본 연구에서는3차원 모델에 위상구조를 적용하는 방법으로 2차원 GIS와 3차원 모델의 연동을 제시하고자 한다. 3차원 모델의 공간별로 분리된 객체를 상응하는 2차원 GIS 레이어의 피쳐와 데이터베이스의 레코드를 통해 연계하고 이로써 3차원 객체간의 관계를 정의하였다. 또한 2차원과 3차원이 연동된 건물모델의 복도네트워크를 구축하였다. 마지막으로 연동된 3D모델을 이용하여 건물내부에서 최적 경로분석을 몇 가지 시나리오를 통해 실시하였다.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.942-948
• /
• 2011

This paper deals with characteristic analysis of axial flux permanent magnet (AFPM) machines with axially magnetized PM rotor using quasi-3-D analysis modeling. On the basis of magnetic vector potential and a two-dimensional (2-D) polar-coordinate system, the magnetic field solutions due to various PM rotors are obtained. In particular, 3-D problem, that is, the reduction of magnetic fields near outer and inner radius of the PM is solved by introducing a special function for radial position. And then, the analytical solutions for back-emf and torque are also derived from magnetic field solutions. The predictions are shown in good agreement with those obtained from 3-D finite element analyses (FEA). Finally, it can be judged that analytical solutions for electromagnetic quantities presented in this paper are very useful for the AFPM machines in terms of following items : initial design, sensitivity analysis with design parameters, and estimation of control parameters.

• 한국전산구조공학회논문집
• /
• 제28권3호
• /
• pp.283-291
• /
• 2015

본 논문에서는 원통형 쉘에 부착된 노즐의 구조 건전성평가를 수행하고 그 결과를 비교하기 위해 2차원(2D)과 3차원(3D) 해석이 수행되었다. 현재 원자력 발전소에서 사용되는 3개의 노즐을 구조 건전성평가를 위해 선정하였고, 각각 노즐은 내부압력, 온도변화 및 외부하중을 받는다. 내부압력에 대한 2D 해석은 1.5이상의 계수 값을 이용하거나 응력집중 계수를 적용하여야 하고, 온도변화에 대한 2D와 3D 해석결과는 피복재의 유무와 상관없이 서로 거의 비슷하며, 외부하중에 대한 WRC Bulletin 297에 의한 해석결과는 3D 해석결과보다 더 보수적임을 확인할 수 있었다.