• Smart Media Journal
• /
• v.7 no.2
• /
• pp.47-53
• /
• 2018

Along with the development of information and communication technology, smart education that can learn without restrictions of time, place and equipment is activated even in the field of education. Although smart education is provided with content-based training solutions, construction of a system that grasps individual characteristics of learners and provides personalized learning is relatively weak. The activity of free choice is an important play activity of early childhood education, but it is not implemented efficiently by relying on the clinical observation of the teacher. If the IoT(Internet of Things) technology based on Hyper-Connected is applied to free-choice activities, it is possible to provide the child's personalized activity type and play-form analysis based on objective and stylized data. In this paper, we design and implement a system to monitor the child's activity of free choice by building an IoT environment that is based on open source hardware. The proposed system provides children's activity information as objective data and will be used as teacher's work mitigation and custom training material for each child.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.488-493
• /
• 2005

In gun stabilization systems, the torque comes from the unbalance mass of gun and the base acceleration is an important source of disturbance which degrades stabilization performance. Fatigue of gear train is another important factor affecting structural safety problems. In this paper, a feedback control gain is designed by optimal control weighting to difference between motor and gun velocity, and a feedforward controller using FXLMS algorithm is adopted to investigate those problems. Experimental results show that the feedforward compensator based on FXLMS can reduce the disturbance effects. The directional convergence property according to initial conditions of the FXLMS is also shown through experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.252-257
• /
• 1995

전자기력을 이용한 능동 진동제어는 1979년 Ellis 및 Mote가 원형 톱의 횡 진동의 감쇠에 관한 연구를 수행하였고, 1990년 Hong Su 및 T.S.Sankar등은 시스템의 절대 위치, 절대 속도 및 상대 위치 등의 제어 변수에 대하여 전자기 액튜에이터의 동적 특성이 진동 절연 성능에 미치는 영향에 관한 연구를 하였다. 본 연구는 상부질량과 하부질량이 스프링으로 연결된 2자유도 모델의 능동 진동제어에 대하여 이론해석과 실험해석을 수행하고 각각의 결과를 비교하였다. 실험모델은 직선운동 가이드에 설치된 2개의 질량과 하나의 전자기 액튜에이터를 이용하였다. 진동제어 방법으로서는 모우드 해석에 의한 제어, 스카이 훅 감쇠 제어, Viscous damping 제어 방법을 적용하였다. 본 연구의 목적은 이론해석 결과와 실험 결과를 비교하고 비슷한 제어효과에 대해서 에너지 소비가 작은 효율적인 제어방법을 찾는데 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.53-61
• /
• 2001

A cutting machine for freeform hull surfaces of ship models is developed and a servo system is employed for tool path control. The servo system consists of BLDC(Blushless DC) motor, control driver and host controller. Also PI controller is applied for precision processing. GUI(Graphic User Interface) was realized by visual c++ for the convenience of users. Free form surfaces are formed by the cutting machine developed in the Ocean Engineering Wide Tank of the University of Ulsan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.9-16
• /
• 2020

Wireless charging has been considered an essential part of recent mobile devices. Moreover, various wireless charging systems have emerged through many studies. Among the systems, in the 2D flat coil system, the transmitter coil and receiver coil are arranged horizontally as close as possible to improve the charging efficiency. Nowadays, the 3D coil system has been proposed by adding some slope to flat 2D coils to reduce the volume. On the other hand, the 3D coil system has a lower charging efficiency than the 2D system that decreases rapidly with increasing distance. This paper proposes a new system that improves the low efficiency and charging freedom, which are the drawbacks of the existing 3D systems. The proposed system was designed in three-dimensions, and another transmitter coil was added to the transmitter coil to improve the transmission efficiency and flexibility. The measurement showed that the charging efficiency of the proposed system was 40.10% when the distance between coils was 8 mm, which is 20.5 % improvement over the existing one. The proposed method can be applied when new wireless charging systems are designed and improve charging efficiency can be improved.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.347-348
• /
• 2008

본 논문에서는 P3-DX 모바일 로봇과 영상처리 시스템을 이용하여 비주얼 서보잉 시스템을 개발하였다. P2Arm 다이나믹을 이용해서 비주얼 서보잉을 위한 로봇 팔 제어를 연구하였고, 로봇을 제어하는 데 있어 보다 효율성과 정확성을 높이기 위해 Kalman 필터 알고리즘을 제안하였다. 비주얼 서보잉에 필수적인 영상정보를 얻기 위해 5자유도 P2Arm에 CCD카메라를 부착하였으며 그 영상정보를 바탕으로 P2Arm을 비롯하여 전체 로봇의 구동을 제어하는 시스템을 개발하였다. 본 논문에서는 P3-DX의 전체적인 구조와 P2Arm의 기구학적인 해석을 논하였고 물체 인식을 위한 영상처리 과정 및 제어알고리즘을 기술하였다. 또한 몇 가지 실험을 통해 본 시스템의 효율성을 검증하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.97-100
• /
• 2001

This paper introduces that it minimizes interference between links at high speed trajectory tracking of 2-degree parallel link robot. And in spite of system uncertainty, it introduces controller design method which is satisfied with performance specification. To do these, we separate two channels from parallel link robot through ICD(Individual Channel Design) and design controller of each channel using QFT(Quantitative Feedback Theory). Finally, we make sure of robustness and excellence of QFT control1er through simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.844-847
• /
• 1996

This paper describes the servo position control for the 2-axis positioning table the servo controller consists of conventional feedback loops, disturbance observer. To reduce the contour error, which occurs in the multi-dimensions machines, cross-coupled controller(CCC) is suggested. A weak point of the CCC is their low effectiveness in dealing with arbitrary nonlinear contour such as circles and parabolas. This paper introduces a new nonlinear CCC that is based on control gains that vary during the contour movement The gains of CCC and adjusted in real time according to the shape of nonlinear contour. The feedback controller based on the disturbance observer compensated for external disturbance, plant uncertainty and bad effectiveness by friction model. Suggested servo controller which improve the contouring accuracy, apply to the 2-axis system. Simulation results on 2-axis table verify the effectiveness of the proposed servo controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1304-1307
• /
• 1996

In this paper, we present a robust Two Degree of Freedom (TDF) $H_{\infty}$ controllers for a missile system. The feedback controller is designed to meet robust stability and disturbance rejection specifications while the prefilter is used to improve the robust model matching properties of the closed loop system. As the perturbed model, we use the normalized coprim factor perturbations. These controllers are designed using $H_{\infty}$ optimization procedures, and applied to a missile model via simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.429-429
• /
• 2000

Micro positioning mechanism is the key technology in many fields, such as scanning electron microscopy (SEM), x-ray lithography, mask alignment and micro-machining. In the paper, a 3DOF parallel-type micro-positioning mechanism is proposed. This mechanism uses piezo-actuators and Flexure hinge to control x, y and $\theta$ motion. It is shown both analytically and numerically that 2 DOF flexure hinge model was better precision than 1 DOF flexure hinge design.