• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.417-427
• /
• 2016

This paper is the first investigation of the steady flow characteristics of an SI engine with a semi-wedge combustion chamber as a function of the port shape. For this purpose, the planar velocity profiles were measured at the 1.75B position by particle image velocimetry. The flow patterns were examined with both a straight and a helical port. Two swirls were observed up to 4 mm valve lift with the straight port and up to 2 mm with the helical one; however, only one swirl was present after these lifts. The flow characteristics changed suddenly between 4 and 5 mm lift in the straight port; on the other hand, the change with lift was gradual with the helical port - the transition points between flow regimes were different with the port shapes. In addition, the centers of the swirls were relatively far from the cylinder center so that the effect of eccentricity may not be negligible at 1.75B, regardless the shape. The eccentricity values with the straight port were especially high - over 0.5 for all lifts. Finally, real velocities were found to be much lower than those predicted by the assumption of ISM evaluation, with the profiles differing qualitatively as well.

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.22-28
• /
• 2012

For a methanol separation column of the BPA (Bisphenol A) plant, HAZOP (hazard and operability) assessment was performed and damage ranges were predicted from the accident scenarios for the fire and the explosion. As a result, the damage range of the jet fire was 20 m in the case of rupture of the discharge pipe (50 mm diameter) of safety valve, and that of the flash fire was 267 m in the case of catastrophic rupture. Also, the damage ranges of the unconfined vapor cloud explosion (UVCE) for the rupture of the discharge pipe and for the catastrophic rupture were 22 m and 542 m, respectively. For the worst case of release scenarios, safety measures were suggested as follows: the pressure instruments, which can detect abnormal rise of the internal pressure in the methanol separation column, should be installed by the 2 out of 3 voting method in the top section of the column. Through the detection, the instruments should simultaneously shut down the control and the emergency shut-off valves.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.362-368
• /
• 1998

The magnetic properties, thermal stability and anti-corrosion properties of $Cr_86Al_14$ spin valves multilayers were studied. It was found that the magnetic properties of $Cr_86Al_14$ spin valves depend on the thickness of antiferromagnetic, ferromagnetic and non-ferromagnetic layers. Exchange coupled field ($H_{ex}$) and magnetoresistance ratio (%) showed the largest value of 20 Oe, 2 % in $glass/Cr_{86}Al_{14}(600 $\AA$)/Ni_{81}Fe_{19}(50$\AA$)/Cu(40 $\AA$)/Ni_{81}Fe_{19}(40 $\AA$)$ spin valves. The $H_{ex}$ MR ratios (%) of CrAl and FeMn spin valves were decreased with increasing annealing temperatures and were lost at 150 $^{\circ}C$, 250 $^{\circ}C$ respectively. Based on these result, it was elucidated that CrAl is more thermally stable than FeMn. It was also shown that there was no change of $H_{ex}$ MR ratios in CrAl, while FeMn was changed and lost 15 days later in corrosion resistance test under 35 $^{\circ}C$, 90 % humidity condition. FeMn was found to be pitted and peeled off 15 days later by SEM micrographic analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.741-749
• /
• 2019

A hydraulic breaker attached to an excavator is a kind of constructuion equipment which is used for the disassembling of buildings, crashing road pavement, breaking rocks at quarry and etc. Therefore, the performance of the hydraulic breaker is mainly evaluated by the impact quantity and impact efficiency, which is an important factor for both the manufacturer and the user. In this paper, modeling and simulation for the prediction of the impact of the hydraulic breaker was conducted according to hydraulic pressure area and operating conditions of the hydraulic valve and piston using the commercial tools SimulationX for the 20ton hydraulic breaker which is mainly used in construction site. In order to verify the reliability of modeling and simulation, the results of previous experimental studies were compared and verified. The results of this study are expected to be useful for predicting the impact of the hydraulic breaker at the design stage before manufacturing and for studying parameters for improving the impact quantity. In addition, the manufacturer predicts that the development time and cost will be reduced through trial and error prevention by predicting the impact of the hydraulic breaker through the results of this paper.

• Journal of the Korean earth science society
• /
• v.42 no.6
• /
• pp.677-687
• /
• 2021

In this study, we analyzed diatoms from core RS15-GC41 collected in Iselin Bank, Ross Sea. A total of 24 genera and 35 species of diatoms are identified, and the having valve abundance of diatoms varies from 0.2 to 28.6×10⁶/g. Four diatom assemblage zones are established by the vertical distribution of diatoms, and changed with a cycle of 100 kyrs. RS15-GC41 were deposited over the last 400 kyrs (corresponding to Marine Isotope Stages 1-11). The open-water species Fragilariopsis kerguelensis, Rhizosolenia styliformis, and Thalassionema nitzschioides abundantly occurred in interglacial periods. Whereas, Actinocyclus actinochilus abundantly dominant during the glacial periods. The distribution of these diatoms indicated, it can be seen that the sea-ice extent was larger and lasted longer during MIS 7, 9, and 11 than that of MIS 1, 3, and 5. Moreover, Paralia sulcata was abundantly predominant in MIS 7, 9, and 11; this finding suggests likely indicating that P. sulcata was transported from the coastal/inner shelf area to the study site, during accumulated in the sediments, reworked with the influx of ice-rafted debris by the currents

• Journal of Chest Surgery
• /
• v.55 no.5
• /
• pp.378-387
• /
• 2022

Background: Atrial fibrillation (Afib) is a marker of increased cardiovascular morbidity and mortality. Owing to the increased prevalence of Afib in patients undergoing cardiac surgery, assessing the effect of Afib on postsurgical outcomes is important. We aimed to analyze the effect of preoperative Afib on clinical outcomes in patients undergoing cardiac surgery using a large surgical database. Methods: This retrospective cohort study was based on the national health claims database established by the National Health Insurance Service of the Republic of Korea from 2009 to 2015. Diagnosis and procedure codes were used to identify diseases according to the International Statistical Classification of Diseases, 10th revision. Results: We included 1,037 patients (0.1%) who had undergone cardiac surgery from a randomized 1,000,000-patient cohort, and 15 patients (1.5%) treated with isolated surgical Afib ablation were excluded. Of these 1,022 patients, 412 (39.7%), 303 (29.2%), and 92 (9.0%) underwent coronary artery bypass, heart valve surgery, and Cox-maze surgery, respectively. Preoperative Afib was associated with higher patient mortality (p=0.028), regardless of the surgical procedure. Patients with preoperative Afib (n=190, 18.6%) experienced a higher cumulative risk of overall mortality (hazard ratio [HR], 1.435; 95% confidence interval [CI], 1.263-2.107; p=0.034). Subgroup analysis revealed a reduced risk of overall mortality with Cox-maze surgery in Afib patients (HR, 0.500; 95% CI, 0.266-0.938; p=0.031). Postoperative cerebral ischemia or hemorrhage events were not related to Afib. Conclusion: Preoperative Afib was independently associated with worse long-term postoperative outcomes after cardiac surgery. Concomitant Cox-maze surgery may improve the survival rate.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.369-375
• /
• 2006

Calibration gas mixtures were prepared using dynamic volumetric method according to ISO 6145-5 and the uncertainty was evaluated. Ten identical capillaries with 0.25 mm in inner diameter and 50 cm in length were applied in this system. Dilution ratio of parent gas was determined by the number of capillaries that passes parent gas and that passes balance gas through. Capillaries were made of Teflon which had good chemical stability against adsorption of gaseous substances. Mechanical valves were introduced in this system in order to minimize the thermal effect of solenoid valves. Concentration of prepared gases were compared with master grade standard gases in cylinders made by RiGAS Co. and calibration of the instrument were completed using comparison method according to ISO 6143. Experimental results showed that the coefficient of variance of diluted oxygen standard gases showed less then 0.2% in most dilution range, that of diluted hydrogen sulfide standard gases showed less then 1.0%. Therefore, it is proven that the standard gases prepared by this system are appropriate to be used as a calibration standards in ambient monitoring, etc.

• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.324-336
• /
• 2020

Cardiovascular calcifications can occur in various cardiovascular diseases and can serve as a biomarker for cardiovascular event prediction. Advances in CT have enabled evaluation of calcifications in cardiovascular structures not only on ECG-gated CT but also on non-ECG-gated CT. Therefore, many studies have been conducted on the clinical relevance of cardiovascular calcifications in patients. In this study, we divided cardiovascular calcifications into three classes, i.e., coronary artery, thoracic aorta, and cardiac valve calcifications, which are closely associated with cardiovascular events. Further, we briefly described pericardial calcifications, which can be found incidentally. Since the start of lung cancer screening in Korea in the second half of 2019, the number of non-enhanced, non-ECG-gated, low-dose chest CT has been increasing, and the number of incidentally found cardiovascular calcifications has also been increasing. Therefore, understanding the relevance of cardiovascular calcifications on non-enhanced, non-ECG-gated, low-dose chest CT and their proper reporting are important for radiologists.

• Journal of Chest Surgery
• /
• v.32 no.9
• /
• pp.781-789
• /
• 1999

Background: Pulmonary artery banding(PAB) accompanies some risks in the aspect of band complications and mortality in the second-stage operation. To assess these risks of the second-stage operation after PAB, we reviewed the surgical results of the second-stage operation in the pediatric patients who had undergone PAB in infancy. Material and Method: From May 1988 to June 1997, a total of 29 patients with preliminary PAB underwent open heart surgery. Ages ranged from 2 to 45 months(mean 20.6$\pm$9.0 months). Preoperative congestive heart failure conditions were improved after PAB(elective operation group) in 27 patients, but early second-stage procedures were required in the remaining 2 patients due to sustaining congestive heart failure(early operation group). Preoperative surgical indications included 2 double outlet right ventricles(DORV group) and 27 ventricular septal defects as the main cardiac anomaly(VSD group). Result: The mean time interval from PAB to the second-stage operation was 15.5$\pm$8.7 months(range 5 days to 45 months). One patient in the DORV group underwent intraventricular tunnel repair and modified Glenn procedure in the other. In the VSD group, the VSD was closed with a Dacron patch in all patients. Concomitant procedures included a right ventricular infundibulectomy in 4 patients and a valvectomy of the dysplastic pulmonary valve in 1 patient. At the second-stage operations, pulmonary angioplasty was required due to the stenotic banding sites in 18 patients. One patient underwent complete ligation of the main pulmonary artery with the modified Glenn procedure. The mortality at the second-stage operation was 17.2%(5 patients). Causes of death were 4 low cardiac output, and 1 autoimmune hemolytic anemia. Diagnosis with DORV and the early operative group were the risk factors for operative death in this series. There was 1 late death. Conclusion: This study revealed the second-stage operation for pulmonary artery debanding and closure of VSD in children was complicated by the correction of the acquired lesions with a significantly high incidence of morbidity and early postoperative deaths. Primary repair is recommended for isolated VSD, if possible.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.112-118
• /
• 1995

The effect of various packaging methods on kimchi quality was investigated in order to develop the packaging techniques for preventing commercial kimchi products from inflation and explosion, due to fermentative gas evolved during storage and distribution. Kimchi was packaged in different methods; 1) atmospheric packaging(AP), 2) check valve packaging(CV), 3) double packaging(DP), and 4) vacuum packaging(VP). The quality of kimchi during storage at $10^{\circ}C$ was evaluated in terms of gas composition, free volume, pH, titratable acidity color index and sensory properties. The gas composition inside packages showed different curves according to the packaging methods. Due to fermentative gas accumulation in both AP and CV, $CO_2$ concentration increased by 2 stepwise pattern, while $O_2$, concentration decreased exponentially. In DP, $O_2$ concentration remained constant, but $CO_2$ concentration increased by 2 stepwise pattern and then decreased. In contrast, VP produced low $O_2$ and high $CO_2$ concentrations only at the end of storage. The free volume in both AP and CV showed typical sigmoidal curves similar to $CO_2$ concentration changes. It remained constant in DP, but started to increase at the late stage of storage in VP. There was no significant effect of packaging methods on pH changes of kimchi. In titratable acidity, DP maintained relatively higher than others. Regarding to the color change of crushed kimchi juice in all packages, L and b values decreased exponentially but a value remained constant during storage. Color index(L b/a) of crushed kimchi juice decreased exponentially and remained constant at the end of storage. The growth of lactic acid bacteria was VP, CV, AP, DP in increasing order. In sensory test, the sourness scores of DP were fairly higher than those of others, but the texture was not significantly affected by the packaging methods. The preference for kimchi showed VP>AP, CV>DP in order of score. In this study, it could be proposed to employ DP and VP method as the effective packaging techniques for preventing commercial kimchi products from inflation.