• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.344-348
• /
• 2007

In this paper, we propose the electrode of the Patterned Vertical Aligned (PVA) cell [1] for high transmittance. We use the 'TechWiz LCD' for calculation of the director configuration and optical characteristics to ensure the results of the proposed electrode structure. In general, the transmittance of the PVA cell depends on the shape of the electrode and cell gap. In this work the width of gate line and data line of the improved electrode design is set to be equal to that of the PVA conventional. Instead, we modified the shape of the top and bottom electrode on order to decrease the area of the defect. For verification, we compared the calculated optical transmittance of the PVA cell with the proposed electrode structure to the conventional PVA cell . As a result, we can confirm that the optical loss due to the variation of the retardation the LC cell around electrode can be definitely decreased by the proposed electrode.

• Journal of Hydrogen and New Energy
• /
• v.10 no.2
• /
• pp.141-149
• /
• 1999

Recently the Ni/MH secondary battery has been studied extensively to achieve higher energy density, longer cycle life and faster charging-discharging rate etc. In this work, the electrode properties of $(LM)Ni_{4.49}Co_{0.1}Mn_{0.205}Al_{0.205}$ alloy and $Ti_{0.6}Zr_{0.4}V_{0.6}Ni_{1.4}$ alloy with addition of Pd were investigated. These alloys did not show any change in XRD pattern by Pd addition. As Pd was added as alloy element, the activation behavior was not affected significantly in both $AB_2$ type and $AB_5$ type electrodes and, On charging and discharging in high current density, Discharge capacity with increasing of Pd content was more decreased. But cycle life was showed increasing. Especially the electrode of $Ti_{0.6}Zr_{0.4}V_{0.6}Ni_{1.4}+0.5wt%$ Pd alloy was not almost decreased discharge capacity for 400cycles.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.300-307
• /
• 1993

To develop high performance nickel-iron secondary battery, the characteristics of charge-discharge reaction of iron electrode were examined by cyclic voltammetry technique, SEM and XRD analysis. The capacity of the test electrodes was determined by the constant current charge-discharge method. It was found that the temperature and concentration of electrolyte were the major determinant factors of electrode capacity, and especially the 1st discharge capacity was increased with the increase of temperature. The effect of fore forming agent on the electrode capacity was negligible. The electrode capacity was above 350 ㎃h/g(36% utility) at 0.25C discharge rate. The stability of electrode was very good, but the activation occurred slowly.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.37
• /
• pp.2-11
• /
• 2014

본 연구에서는 최근, 전기자동차 및 소형 레저용 선박을 중심으로 연구가 진행 중인, 대용량 이차전지의 용량 증대를 위하여 필요한 내부 전극 접합 기술에 관하여 연구하였다. 종래의 초음파 용접으로 적층할 수 있는 적층량의 한계를 극복하기 위한 방안으로 전극 소재에 직접 가열을 통한 용접 방법이 아닌 용가제 금속을 적용하여 전극을 접합시켜, 통전성과 인장강도를 증대시킴과 동시에 열적요인으로 인한 전극표면에 화학적 활성물질의 변성을 최소화할 수 있는 저온 접합 방법에 대하여 연구하였다. 부연하여 용접을 위하여 무리하게 출력을 상승시킬 경우 용접열의 영향으로 전극의 변형 및 활성물질의 변성을 야기함과 동시에 최종 페키징 이후 출력저하, 발열 등, 배터리의 안정성을 저하시키는 요인으로 작용한다. 따라서 본 연구에서는 고주파 유도가열을 통한 유도 가열 방식의 접합 방법과 용융 도금을 통한 용가제 금속의 전처리를 통한 종래와는 차별화된 전극접합 방법을 소개한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.500-500
• /
• 2012

플라즈마 디스플레이 패널(PDP)는 미소체적의 dielectric barrier discharge (DBD)를 이용한 한 예로 볼 수 있다. PDP 셀은 실험을 통하여 방전 특성을 분석하기에 아주 작은 크기이기 때문에 시뮬레이션을 이용하는 것이 방전 특성을 분석하기에 유용하다. 시뮬레이션 방법 중 유체 시뮬레이션은 높은 압력에서 기체 방전을 분석하기에 아주 유용한 방법이다. PDP 전극 각도를 바꿈으로써 발광 효율을 높일 수 있음이 논문으로 발표 되었다. 이 발표에서는 2차원 유체 시뮬레이션을 사용하여 전극의 각도 변화뿐만 아니라 전극 간격과 압력 변화에 따른 방전 특성 변화를 연구하였다. 평판 전극의 각도 변화에 따라 전기장 세기, 방전 공간 내 전하 및 여기된 입자수 및 분포, 방전 개시 전압 등의 진단을 통하여 결과를 분석하였다. 전극 간격이 길어질수록 convex 구조의 효율 증가가 크게 나타났으며 압력이 커질수록 concave 구조의 효율 증가가 크게 나타났다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.50-50
• /
• 2008

고성능 수직형 발광다이오드를 위해 저저항을 가지는 TiN/Al 오믹 전극을 개발하였다. 열처리 전에는 ${\sim}10^{-4}{\Omega}cm^2$의 컨택저항을 보였지만, 열처리후에는 TiN/Al 전극과 Ti/Al 전극은 모두 전기적 특성 감소를 보였다. 이 전극들을 시간이 지남에 따라 측정하였을 시에 TiN/Al 전극이 Ti/Al 전극보다 안정함을 보였다. XPS와 SIMS를 이용하여 오믹 형성과 전기적 특성 감소 메커니즘을 분석하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.60-67
• /
• 2005

The superposed discharge type ozonizer of high ozone concentration using vacuum discharge tube has been designed and manufactured. It consists of three electrodes(central electrode, internal electrode, and external electrode) and one discharge gap(discharge gap between internal electrode and external electrode), is a superposed silent discharge type ozonizer for which the AC high voltages applied to the central electrode within discharge tube and the internal electrode has a $180{[^\circ]}$ phase difference and for which the external electrode is a ground. Ozone is generated by overlapping silent discharge between central electrode and external electrode, and silent discharge between internal electrode and external electrode. At the moment, discharge characteristics and ozone generation characteristics were investigated in accordance with vacuum of discharge tube, discharge power of ozonizer, and quantity of supplied oxygen gas. In consequence, high ozone concentration can be obtained 8840[ppm].

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.315-322
• /
• 2000

The response characteristics of the bioelectrode developed by the co-immobilization of spinach root tissue and ferrocene in a carbon paste matrix for the amperometric determination of hydrogen peroxide were evaluated. In the range of electrode potential examined (-0.3~0.0V vs. Ag/AgCl). the response time was relatively short ($t_{95%}=11.8$ sec) and it responded in the wide range of pH. Also, its detection limit was $2.25{\times}10^{-6}M$ (S/N=3) and a relative standard deviation of the measurements which were repeated 15 times using $1.0{\times}10^{-3}M$ hydrogen peroxide was 1.87%. The bioelectrode sensitivity decreased to 40% of the original value in 19 days of continuous use.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.988-990
• /
• 2003

기존의 FED 용 MIM cathode 에 쓰이는 다층금속상부 전극을 열처리하였을 때 생기는 문제점에 대하여 살펴보았다. 먼저 열처리 후에 상부전극자체가 열변형이 일어나면서 나타나는 비저항의 증가, 표면 형상의 악화 등이 문제점으로 나타났고, 여기에 하부전극의 변형이 이러한 현상을 더욱 악화시키는 것을 확인할 수 있었다. 특히, 상부전극의 경우 그 두께가 극히 얇아 열변형이 매우 취약한 탓에 대체 물질의 개발이 시급하였다. 산화물전극은 열변형에 대해 매우 안정하여 열처리 후, 비저항이나 표면 형상의 변화가 적으며, 얇은 두께에서도 균일하게 박막이 형성되어 그 특성이 다층금속전극에 비해 매우 뛰어남을 확인하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.749-755
• /
• 2013

The purposes of this research are to know the optimal gab and electric pressure (voltage) of electrode-plates coated with activated carbon and also to study their arrangement through dust removal efficiency. From the experimental results of attached dust mass at different electrode-plate gab, the frequency of attachment and detachment of dust was more increased as electrode-plate gab was closer. In attached dust mass per unit area of electrode-plate, the farther electrode gab, the more increased. But in total attached dust mass, the closer electrode gab, the more removed. From the experimental results, the optimal electrode arrangement in dust removal chamber was considered that the forward parts of chamber need to be increased the number of electrode-plate, the backward parts to be increased them. The dust attachment have no relation with electric pressure while showing high removal efficiency under condition of 5 kV of voltage and 2 cm of electrode-plates gab.