• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1125-1131
• /
• 2012

According to abrupt decrese in number of farmer and ageing society, there has been a need for development of low cost agricultural robot. In this paper, a H/W and S/W platform of caterpillar type agricultural chemical dusting robot based on XP embedded system were described. The developed agricultural robot has 2 d.o.f caterpillar type driving wheel and 2 d.o.f chemical dusting spray mechanical system. The H/W platform of the agricultural robot consists of robot controller, remote controller and sensor controller. In S/W platform, 5 processes work concurrently, which are task manager, TCP-IP communication process, localization process, wheel control, and sensor control process. This robot platform has been developed for chemical dusting robot. We proved this system's validity through field test.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.201-206
• /
• 2016

Aircraft have a cross axis of the three each other for maintenance of aircraft position. It is called roll axis, pitch axis and yaw axis. Attitude reference system is a sensor for detecting a change of the three axis. In this paper, mobile robot platform install part of Pan-tilt and HMD attitude reference system, because of we use control camera. The acceleration sensor is very weak a lot of noise to vibration, also problem with data from process of mapping to the data problems to arise. However to solve this problem, we removed the average filter and Cosine Interpolation for Pan-tilt. Using capacity evaluation for outdoor environment for we are proposing. Mobile robot has HMD and equipped Pan-tilt. We control mobile robot camera. In this experiment result is little bit delay happening, however Pan-tilt camera is relatively stable control checking. Also, we will checking any terrain and slopes is no problem for mobile robot driving skills.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.468-469
• /
• 2008

항공기, 차량, 고속의 비행체 등과 같은 동적인 플랫폼에서 표적을 추적하기 위한 영상 추적 시스템은 시선을 안정화하는 외부의 추적루프와 내부의 안정화 루프를 포함하는 구조로 되어 있다. 2축 김발을 사용하는 영상 추적 시스템의 추적루프는 크게 영상 추적기, 추적 제어기, 안정화 루프 등으로 구성되어 있다. 본 논문에서는 영상 추적 시스템의 추적 제어기를 설계하여 성능을 분석하고, 또한 설계된 제어기를 적용하여 영상 추적기의 시간지연에 의한 추적 루프 특성을 분석하였다. 마지막으로 설계된 추적 제어기를 영상 추적 시스템 시뮬레이터에 적용하여 고기동 고속의 비행체 환경에서 추적 루프 성능을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.805-814
• /
• 2013

A hydraulic dipod platform is used for tracking and stabilizing an antenna system to designate a satellite on a moving vehicle. The 2-DOF controller is very well suited to this controller design object because it is more flexible than the 1-DOF controller when the design object is not only the consideration between stabilizing and tracking but also the trade-off between performance and robustness. The 2-DOF controller synthesis based on the $H_{\infty}$ framework is divided into two design procedures. In this hydraulic dipod platform example, the single-step method shows better performance whereas the two-step method shows better robustness. The difference between these two synthesis results is compared using the structural property of the interconnection system matrix.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.303-304
• /
• 2007

항공기, 차량, 유도탄 둥과 같은 동적인 플랫폼에서 표적을 추적하기 위해서 시선을 안정화하는 외부의 추적 루프와 내부의 안정화 루프(또는 속도 루프)가 있고, 또한 표적을 추적하기 전 표적을 지향하고 포착하기 위해 김발을 동체에 대해 일정한 각도로 유지하기 위한 위치 루프도가지고 있다. 일반적으로 안정화 루프는 각속도를 측정하기 위한 검출기로 자이로를 사용하고, 위치 루프는 김발각을 제어하기 위한 위치 검출기를 사용한다. 그러나 안정화 루프에 사용되는 자이로는 루프 성능을 최적으로 하기 위해서 고성능/고가의 자이로가 사용되는 단점이 있다. 따라서 본 논문에서는 위치 루프에 사용되는 위치 센서인 리졸버를 사용하여 고성능/고가의 자이로 센서 없이 안정화 루프를 설계하였고, 리졸버를 사용하여 설계된 안정화 루프가 동적인 플랫폼에 사용될 수 있는지 시뮬레이션 결과와 실험 결과를 통해 분석하였다.

• Journal of Platform Technology
• /
• v.6 no.2
• /
• pp.3-9
• /
• 2018

Recently VR environment is used in many areas including mobile learning, smart factory. However HMD(head-mounted display) is required to a dedicated and expensive system with high-end specification. When designing a VR system, it is needed to handle performance, mobility and usability. Many VR applications need to handle diverse sensors and user inputs continuously in a streaming manner. In this paper we design a VR mobile platform and implement a low-cost mobile VR HMD running on the platform. The VR HMD supports 3D contents delivery in a mobile manner. It is used to detect the motion detection based on angle value of a VR player from accelerator and gyro sensor. The MPU-6050, 6-axis sensor, is used to get a sensory value and the sensory value is taken as an input to a VR rendering server on a Unity game engine that is generated 3D images.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.373-378
• /
• 2004

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probebased Storage Device). However, most of them have low area efficiency, which is undesirable as data storage devices, since all of the components (springs, comb electrodes, anchors, platform, etc.) are placed in-plane. In this paper, we present a novel structure of electrostatic 2-axis MEMS stage that is characterized by having large area platform. For large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. In this article, the structures and operational principle of the MEMS stages are described, followed by design procedure, structural and modal analysis using FEM(Finite Element Method). The area efficiency of the MEMS stage was designed to be about 55％, that is very large compared with conventional ones having a few percentage.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.82-90
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probe-based Storage Device). However, all of the components(platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficienceis, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having large area platform. for obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design procedure, structural and modal analyses using FEM(Finite Element Method). The areal efficiency of the MEMS stage was designed to be about 25%, which is very large compared with the conventional ones having a few percentage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.49-55
• /
• 2020

Recently, companies are growing by introducing rational and optimized technology for all processes, including design. In particular, the emergence of ICT-based cloud platforms has given rise to solutions that are equipped with all the necessary business services in corporations and schools, affecting technical education and corporate growth that have not been experienced thus far. The virtual reality technology and convergence of HMD devices utilizing this platform is a new turning point in corporate development. Therefore, this study tested the VR functions used in design based on 3DEXP and HMD VR devices. Second, design utilization and this issue were examined through a survey based on the experimental data. The results showed that 3DEXP and HMD VR technologies are closely related in terms of design utilization and have demonstrated their mediated effects through statistical analysis. Nevertheless, it is not enough to generalize some engineering students as a result of the study. On the other hand, the introduction of HMD VR technology is one of the pillars of education and the implementation of virtual reality technology.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1824-1825
• /
• 2006

항공기, 차량, 유도탄 등과 같은 동적인 플랫폼에서 표적을 추적하기 위해서는 시선을 안정화하는 외부의 추적루프와 내부의 속도 루프를 포함하는 서보 구조가 필요하다. 본 논문에서는 내부의 속도 루프인 안정화 루프에 큰 입력 전압이 인가되었을 때 구동기(Actuator) 포화 현상에 의해서 공간 안정화 루프 성능이 나빠지지 않게 와인드업 방지(Anti-windup) 기능을 가진 디지털 비례적분(Proportional Integral, PI) 제어기를 설계한다. 디지털 와인드업 방지 비례적분 제어기는 일반적으로 SISO 시스템 설계를 위한 방법으로 와인드업 방지 기능을 가진 R, S, T 다항식으로 표현되는 입출력 형태의 제어기를 이용하여 설계하였다. 설계된 제어기는 모델링에 의한 시뮬레이션 결과와 실험결과를 통해 성능을 분석하였다.