• The KIPS Transactions:PartA
• /
• v.17A no.1
• /
• pp.19-26
• /
• 2010

As standard of living is higher and aging society is coming, it is needed to develop transportation that is easy to use for weak person. To comply with the demands, it is started to make Bi-modal Tram that is on KRRI(Korea Railroad Research Institute)'s hands. This tram has to have good accessibility like bus, be low level from ground like subway, and park accurately so wheel chair's or passenger's foot can't fall into the gap. But Bi-modal Tram have long length, so it need development of All Wheel Steering System. The Bi-modal Tram that have all wheel steering system steer not only the first axle but also the second and third axle from the first axle or articulation angle, and velocity, and so on. At this study, we discuss AWS ECU's development process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.91-97
• /
• 2008

In this paper, we propose a channel estimation method associated with the interpolation order for OFDM systems. We first analyze the time varying channel and frequency selective channels, and then derive the channel index which indicates the ratio of the time axis variation and the frequency axis variation. This index is used for determining the order of interpolation such as time axis followed by frequency axis interpolation or vice versa. The computer simulation over a DVB-T system shows that the proposed method can provide more accurate channel information, thereby improving the overall performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.53-54
• /
• 2012

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.122-126
• /
• 2009

KSLV(Korea Space Launch Vehicle)-I is designed as a launch vehicle to enter a 100 kg-class satellite to the LEO(Low-Earth Orbit). Attitude angles of the upper-stage, including roll, pitch and yaw are controlled by cold gas thruster system using nitrogen gas. To verify the flow rate of the gas charging system and to prepare a nitrogen gas charging scenario, the development of a gas charging simulator for RCS(Reaction Control System) is required. This paper describes the orifice design, development, and test of the gas charging simulator for RCS of KSLV-I.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.71-76
• /
• 1992

축정렬이 불량한 경우 축진동이 과도하게 발생하여 출력이 감소하고 소음이 발생하며, 심한 경우 회전체의 파손과 같은 손실을 입을 수 있다. 특히 축 정렬불량으로 인한 진동은 교정이 안되는 것이 특징이므로 근본적으로 진동 을 해결하기 위해서는 축 정렬을 다시 시행해야 한다. 그러나 터빈은 다른 기계 구조물과 달리 분해 점검에 많은 시간과 경비가 요구되므로 축 정렬시 정확한 작업이 요구된다. 본 연구에서는 터빈계통의 축정렬을 수행하는 절차 와 방법에 대해서 검토하였다. 이를 위해 축정렬이 입력데이터로 쓰일 수 있 는 상태측정방법중 커플링 원주와 커플링 면 측정방법이 설명되었으며, 측정 값으로부터 축정렬을 수행하기 위해, 베어링의 이동량 계산과정과 쉼 가감량 의 계산방법을 기술하였다. 축정렬의 원리와 방법의 적용과정을 실제로 알아 보기 위해 평택화력 1,2호기에 대한 축정렬이 수행되었다. 1,2호기는 고압터 빈, 2단계의 저압터빈 및 발전기로 구성되어 있는 다축 시스템으로서, 제작 사측에서 요구하는 정렬 기준값을 감안하여 축정렬에 필요한 베어링 조정량 을 계산하였다. 계산과정은 기준로터로 지정된 저압터빈에서부터 축정렬상태 도를 작성하여 가면서 단계적으로 설명되었으며, 최종적으로 쉼의 가감량까 지를 보여줌으로서 축정렬과정을 완료하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2048-2053
• /
• 2011

The aim of this paper is to propose an energy harvesting system by converting mechanical energy of revolving door into electrical energy. The method of energy harvesting system is discussed on two methods: one is the energy-harvester using gear shaft coupling system, and the other is the energy-harvester using spiral spring system. The former is generated by coupling the shaft of rotating door with generator system, while the latter is generated by connecting end-effector of door with the string of generator system. We present the experimental results for two developed energy-harvester. Finally, a comparison between these results is presented to show the validity of energy-harvester.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1021-1027
• /
• 2006

Torque fluctuation of an engine and angular velocity variation of a propeller shaft are the main excitation sources in the vehicle driveline. This paper presents brief mechanism of these excitation sources. Equivalent models of these systems are construced to simulate the excitation source. The computer simulation was carried out by ARLA Simul v 6.7 and ARLA-Simstat v 2.3. Results of the simulations show the characteristics of torsional excitation source of the driveline. Experimental setups for engine system and propeller shaft system are constructed with component of the vehicle. Torque fluctuation of the flywheel and angular velocity of the propeller shaft were measured from this experimental setups. Experimental results are compared with simulation results. The results from experimental analysis agree with those from theoretical results.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.1-9
• /
• 2019

This paper elaborates on the directional axis guidance and control algorithm used in mission flight for high altitude long endurance UAV. First, the directional axis control algorithm is designed to modify the control variable such that a strong headwind prevents the UAV from moving forward. Similarly, the guidance algorithm is designed to operate the respective algorithms for Fly-over, Fly-by, and Hold for way-point flight. The design outcomes of each guidance and control algorithm were confirmed through nonlinear simulation of high altitude long endurance UAV. Finally, the penultimate purpose of this study was to perform an actual mission flight based on the design results. Consequently, flight tests were used to establish the flight controllability of the designed guidance and control algorithm.

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.394-401
• /
• 1995

본 연구는 중심부에 액체, 외주부에 산화제가 흐르는 기액 동축분류의 유동장에 대한 것이다. 기액 동축 분사기는 연료의 분사량이 적은 소형 연소시스템을 고려하여, 실험은 연공비(W1/Wa)가 0.6 이하를 대상으로, 물과 공기를 사용하여 분사조건에 따른 분무특성과 기액 2상 분무류의 기본구조를 조사하여 액적의 확산, 기액혼합특성에 대하여 검토하여 다음과 같은 결론을 얻었다. 반경방향 기상속도분포 및 액적유속분포는 분구직경 및 분사조건에 관계없이 정규분포에 가까운 형태를 취하고 있으며, 각각 식 (2) 및 (3)으로 나타낼 수 있다. 기상속도는 반치폭은 축방향에 따라 일정한 구배 (≒4.6)로서 증가하며, 기상만의 단상분류의 구배(≒6)에 비해서 완만하다. 액적유속 반치폭은 축방향에 따라 더욱 완만한 구배(≒3.1)로서 증가한다. 무차원 액적유속분포는 축방향에 따라 일정한 구배(n≒1.5)로서 감소한다. 액적의 확산은 상대적으로 기액유량비가 클수록 효과적으라고는 말할 수 없고, 최대 확산을 이루는 최적의 기액유량비가 존재한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.77-83
• /
• 2011

In this paper, we study the throughput-delay tradeoff of OFDMA systems in context of 2-dimensional resource allocation, and analyze the effect of frequency diversity and user-multiplexing in time domain that has on delay QoS performance. Based on the analysis results, we investigate the impacts of delay QoS on spectral efficiency. In high SNR regime, the optimal DoM (degree of multiplexing) maximizing the spectral efficiency is identified. The results of the high SNR analysis can give us an intuition on an efficient resource allocation policy. Finally, through the simulation results, we verify that our approach with its optimal DoM yields substantial capacity gain.