• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.193-198
• /
• 2004

In general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, my introduce air into pun, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. This study investigated experimentally the formation of the vortex to understand the mechanism of vortex formation and to prevent the formation of vortex in the sump model using by the model test and PIV tool. Sump model was manufactured to 1/8 scale with the drawing of W intake pumping station. from the results of model test and PIV, the vortex were occurred the in the whole section. Thus, sump model tests with the anti-vortex device might be considered to prevent the formation of vortex in the sump model.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.1-13
• /
• 1998

In the present paper, the hydrodynamic characteristics of three dimensional hydrofoils moving with a constant speed below the free surface using a higher-order boundary element method based on 9-node Lagrangian curvilinear elements are investigated. A bi-quadratic spline scheme is employed to improve the numerical results on the free surface. To validate the present scheme, the calculated results are compared with the analytic solutions for a submerged sphere and a spheroid showing a good agreement. For the validation of the hydrofoil study, the computed lift and drag of a hydrofoil having $NACA64_{1}A412$ section with aspect ratio(A.R.) of 4 are compared with the experimental data by Wadlin et al.[28]. The comparison covers a number of variations of angle of attack and submergence depth. Then, using an A.R. hydrofoil with NACA0012 section, the free surface on the lift and drag are investigated and these are compared with the previous results. The wave elevations and patterns created by the aforementioned submerged bodies are also investigated with Froude numbers and submergences.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.171-177
• /
• 2009

Optical packet switching(OPS) is a strong candidate for the next-generation internet, since it has a fine switching granularity at the packet level for providing flexible bandwidth, and provides seamless integration between WDM layer and IP layer. Optical packet switching have been studied in two categories: OPS in synchronous and OPS in asynchronous networks. In this article we are focused on contention resolution of OPS in asynchronous networks. The hybrid buffer have been addressed, to reduce packet loss further as one of the alternative buffer structures for contention resolution of asynchronous and variable length packets, which consists of the FDL buffer and the electronic buffer. The OPS design issue for the limited number of TWCs and internal wavelengths is important in the aspect of switch cost and resource efficiency. Therefore, an hybrid buffer structured optical packet switch and its scheduling algorithm is presented for considering the limited number of TWCs and internal wavelengths, for contention resolution of asynchronous and variable length packets. The proposed algorithm could lead to the packet loss improvement compared to the legacy LAUC-VF algorithm with only the FDL buffer.

• Nuclear Engineering and Technology
• /
• v.18 no.2
• /
• pp.97-106
• /
• 1986

System thermal-hydraulic parameters and simulated, using the best-estimate system code(RELAPS/MODl/NSC), based upon the sequence of events for the KNU1 (Korea Nuclear Unit 1) loss of offsite power transient at 77.5% power which occurred on June 9,1981. The results are compared with the actual plant transient data and show good agreements. After the flow coastdown following the trips of both reactor coolant pumps, the establishment of natural circulation by the temperature difference between the hot and the cold legs is confirmed. The calculated reactor coolant flowrate closely approximates the plant data indicating the validity of relevant thermal-hydraulic models in the RELAP5/MOD1/NSC. Results also show that the sufficient heat removal capability is secured by the appropriate supply of the auxiliary feedwater without the operation of S/G PORVs. In addition, a scenario accident at full power, based upon the same sequence of events described above, is also analysed and the results confirmed that the safety of KNU1 is secured by the appropriate operation of the S/G PORVs coupled with the supply of auxiliary feedwater which ensures sufficient heat removal capability. The characteristics of the non-safety related components such as the turbine stop valve closing time, S/G PORV settings etc. are recognized to be important in the transient analyses on a bestestimate basis.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.157-163
• /
• 2013

Purpose: This study was investigated weather watching 2D and 3D images effecting on accommodative function (AF), and differences between changes of AF by 2D and 3D. Methods: 50 subjects (male 30, female 20) aged 20's to 40's years old ($22.9{\pm}3.93$ years) who are available to watching 3D images were participated for this study. Accommodative amplitude (AA) by near point of accommodation (NPA), accommodative response (AR), positive and negative relative accommodation (PRA, NRA), accommodative facility (AF) were measured before, after watching 2D and 3D images at 1 m distance for 30 minutes respectively. Results: Accommodative amplitude after both watching 2D and 3D images decreased comparing to before watching images, and AA after watching 3D images was significantly lower than after watching 2D images. AR after both watching 2D and 3D images increased comparing to before watching images, but there was no difference between 2D and 3D. PRA and NRA were not significantly different between before, after watching 2D and 3D images. Accommodation speed by AF was increased for before watching ($13.52{\pm}3.32$ cpm) following by for after watching 2D images ($14.28{\pm}3.21$ cpm) and for watching 3D images ($14.90{\pm}3.27$ cpm). Conclusions: Watching images at close distance is effect to accommodation functions, and sequence of AA decrease of before watching images following by after watching 2D images and after watching 3D images may effect to asthenopia with same sequence as AA decrease. The results of increase of AF after watching images, specially 3D images show a possibility of vision therapy and further detail VT studies using 3D images are required in the future.

• Korean Journal of Poultry Science
• /
• v.34 no.4
• /
• pp.259-269
• /
• 2007

This study was compared the effect of shelf-life and DHA accumulation in chicken meat from broilers fed experimental diets for two weeks($21{\sim}35$ days) of growers. Two hundred-ten male Ross broilers, 1 day of age, were randomly allocated to seven treatment groups. Experimental diets were assigned to each of the seven groups: control diet containing tallow, T1 with 1.00% fish oil, T2 with 2.00% fish oil, T3 with 2.00% fish oil, 200 ppm vitamin E and 200 ppm vitamin C, T4 with 2.00% fish oil and 200 ppm vitamin C, T5 with 2.00% fish oil and 200 ppm vitamin E, and T6 with 3.00% fish oil. The levels of DHA in chicken meat was the highest in T6, and T1 in breast muscle and thigh muscle with skin was higher than that of $T2{\sim}T5,\;T2{\sim}T5$ in raw chicken meat and wing with skin was about two-fold higher than that of T1. The contents of DHA in chicken meat according to storage days were significantly reduced to 42.30%, 49.38% and 48.51% in T1, T2 and T6, respectively, and this decrease was higher than that of T3, T4 and T5 (p<0.05). Particularly, the rate of reduction of DHA was the lowest in the T3 and T5, which were the lowest in TBARS(thiobarbituric acid reactive substances). TBARS increased in the order of T6, T2 and T1, but reduced in the order of T3, T5 and T4 according to storage days, and there was a significant difference among the treatment groups (p<0.05).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.37-55
• /
• 2000

Two-dimensional numerical experiments and field surveys have been conducted to clarify some environmental variations in the flow and sedimentation in the adjacent seas after the construction of a tidal embankment. Velocities of flow and water levels in the bay decreased after the construction of the barrage. When the freshwater was instantly released into the bay, the conditions of flow were unaltered, with the exception of a minor variation in velocities and tidal levels around the sluices at the ebb flow. The computational results showed that freshwater released at the low water reached the outside of the bay and then returned to the inside with the tidal currents at the high water. The front sea regions of the embankment had a variety of sedimentary phases such as a clayish silt, a silty clay and a sandy clayish silt. However, a clayish silt was prevalent in the middle of the bay. On the other hand, the skewness, which reflects the behaviour of sediments, was $\{pm}0.1$ at the front regions of the embankment while it was more than ±0.3 in the middle of the bay. Analytical results of drilling samples acquired from the front of the sluice gates showed that the lower part of the sediments consists of very fine silty or clayish grains. The upper surface layer consisted of shellfish, such as oyster or barnacle with a thickness of 40～50 cm. Therefore, it seemed that the lower part of the sediments would have been one of intertidal zones prior to the embankment construction while the upper shellfish layer would have been debris of shellfish farms formed in the adjacent seas after the construction of the embankment. This shows the difference of sedimentary phases reflected the influence of a tidal embankment construction.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.109-118
• /
• 2012

The study is aimed to suggest a preliminary data on the improvement of children's recreational facility to enhance children's creativity at Sangsang Children Park Project(SCPP) in Seoul Metropolitan City being the case study. The book review, especially the field observation was implemented by the video recording methods for analyzing the children's play behavior with regard to the six sites of the SCPP that was constructed in March 2008 until May 2010. Because of the research, the first 21 patterns of the creative activities were shown. Second, the prime using rates of facilities were the combination of play facilities among other play facilities like swings, slides, trembling horse etc. However, more children's creative behaviors occurred on independent play facilities like swing, trembling horse, etc. than at combination play facilities. Third, children's creative behaviors diversely occurred at a moving or fluid facility like a swing, trembling horse and a spatial facility like sand field more than a fixed facility like combination play facility. Fourth, children's creative behavior could be divided and evaluated by five categories and elements of fluency: the flexibility, the creativity, the elaborateness, and the imagination. Nevertheless, it was assumed that the creative elements of the five categories were mixed together with each other instead of showing an individual characteristic. Fifth, based on this analysis, the research reached out to the conclusion that the combination play facility of imaginary children's park would be designed together with more fluid and spatial facilities to improve the children's creativity. Finally, It was proposed that the play facilities of imaginary children's park like drawing wall or board, spatial play facilities and handicraft facilities etc. would be introduced to improve sorts of creativeness on elaborateness and imagination shown less than the fluency, flexibility, and originality.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.4
• /
• pp.261-268
• /
• 2002

Biodegradation of monochlorophenols by wood rot fungi such as Daldina concentrica, Trametes versicolor and Pleurotus ostreatus was evaluated by determining their resistance or toxic test and biodegradability. The metabolites of monochlorophenols were also analyzed. Among the three fungi, T. versicolor was the most resistant to 200 ppm of 2-, 3- and 4-chlorophenols, and did not show any inhibitory mycellium growth. But D. concentrica had a little inhibition effect at more than 100 ppm of 3- or 4-chlorophenol. Control cultures of P. ostreatus took even 14 days far the completion of mycellium growth, but the hyphal growth was improved when 2- or 3-chlorophenol were added to the culture. In biodegradation analysis, P. ostreatus showed the highest degradation of 2- or 3-chlorophenol, while T. versicolor was the most effective in 4-chlorophenol. D. concentrica and P. ostreatus slowly degraded 4-chlorophenol. However, T. versicolor had similar degradation capability in the three monochlorophenols, suggesting that the biode- gradation nude is dependent on the fungi as well as the type of monochlorophenol. Several metabolites such as 1,3,5-trihydroxyl benzene, 1-ethyl-1-hydroxyl pentane, 2-propenoicacid, methylmalonic acid and 2-methyl-4-keto-pentan-2-ol were found as products of primary oxidation of 2-, 3- and 4-chlorophenols by intact fungal cultures. fatty acids including tetradecanoic, heptadecanoic and octadecanoic acids were also detected The order of increase of mycellium weight during incubation were P. ostreatus > T. versicolor > D. concentrica. The pH in the culture was not constantly changed depending on incubation days, but the mycellium weight was slightly increased, indicating that the biodegradation of monochlorophenol might have low relationship with the mycellium growth Laccase activities of T. versicolor and P. ostreatus were continuously increased depending on the incubation days, suggesting that the ligninolytic enzyme activity play an important role in the biodegradation of monochlorophenol.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.