• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.417-422
• /
• 2016

Aids to Navigation (AtoN) are marine traffic facilities to improve the safety and efficiency of shipping. "New Dangers" should be appropriately marked using lateral, cardinal or isolated danger marks or by using an Emergency Wreck Marking Buoy. However, Emergency Wreck Marking Buoys are difficult to implement in terms of speed and accuracy of installation. In the case of sinking accidents, it is often difficult to immediately install an Emergency Wreck Marking Buoy because of weather conditions, the marine environment or accident positioning. This study concerns Auto-Releasing Emergency Wreck Marking Buoys, which should be installed in all vessel for safe marine navigation and efficient maritime transport with reference to the Maritime Buoyage System (MBS). Auto-Releasing Emergency Wreck Marking Buoys include an auto-release unit, auto reel chain and auto lighting lantern. These buoys can be automatically released from the deck of a vessel and will float in the water for quick installation at the scene of an accident, even in the case of sinking accidents. Auto-Releasing New Mark Buoys are expected to reduce to installation process, prevent secondary accidents by the risk of navigation and be search and rescue rapidly.

• Journal of the Korean Magnetics Society
• /
• v.26 no.3
• /
• pp.99-104
• /
• 2016

For patients receiving chemotherapy and radiation therapy treatment progresses as vomiting, nausea, weight of the patient because of a loss of appetite it is reduced. The patient's weight and the distance from the skin and the treatment site is expected to be closer, thereby reducing the change in the skin because of this dose. This study tests using a loose see the difference between the volume change appears as the weight of the patient using the same phantom and the phantom body of the patient. To using the same as the position EBT film is attached to the skin of the treatment site and was adjusted to the thickness of the Bolus. And using a computerized treatment planning only tomotherapy equipment was passed under the conditions according to the thickness of the radiation dose. To baseline for accurate reproduction position using the MVCT was applied to treated with verification. By passing a total of three dose reduced the error, it was a measure of the film by using a dedicated scanner, EBT VIDAR scanner. Got an increase in the skin dose is displayed each time the thickness of the bolus reduced, in a bolus was completely removed with the highest value. If the changes appeared dose was greater weight loss patients to chemotherapy and therefore bolus thickness variation considering the weight loss of the patient when applying the tomotherapy of nasopharynx cancer was found that the increase in skin dose be increased. This large patient before treatment due to weight loss over the image verification is considered to be established should consider how to re-create your mask and treatment plan for fixing it.

• Journal of Ginseng Research
• /
• v.32 no.4
• /
• pp.275-278
• /
• 2008

Ginseng stem fungus gnat, Phytosciara procera, is reported as a ginseng pest for the first time. It is new to science that a member of the family Sciaridae is a ginseng pest. In our observation, larvae of the gnat can penetrate the stem of ginseng, and then they make a shaft in shoot and root. Number of adults captured by yellow sticky traps were peaked in twice, from late July to early August and from late August to early September. In a ginseng field, 29.7% of ginseng damaged by Phytosciara procera is also infected by bacterial disease caused by Erwinia carotobora. However, there is a possibility on environmental-friendly control, as a result of decreasing effect of damage over 85% when remaining a part of berry on peduncle than tatally remove.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.188-198
• /
• 2018

Purpose: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. Materials and methods: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. Results: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. Conclusion: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.

• Journal of Korea Game Society
• /
• v.7 no.3
• /
• pp.67-76
• /
• 2007

As the performance of game consoles is so highly progressed that services such as internet browsing become available on the consoles, the need for text input schemes on game consoles is rapidly raised. In this paper, we present a text input method of alphabet characters and several symbols using a gamepad, which is a widely used input device for most game consoles. Just like other text input methods using gamepad, our method allows users to enter texts by manipulating the gamepad with a user interface displayed on the screen of the console. A key idea of this paper is to present the user interface that is similar to the $4{\times}3$ keypad on mobile phones. The motivation of this idea is a principle that the experience of using a text input tool can be transferred to another tool that has similar interface. Another motivation is that the keyboard-based interface is too complex to be easily manipulated by simple input from a keypad, which is four orthogonal directions and several fire signals. Since most of keys on keypad of $4{\times}3$ keys are represented by a combination of two orthogonal directions, users feel easier in entering texts using keypad-based interface. We prove this argument in this paper by a user test of ten subjects. After about two experiment sessions, subjects reach 13 WPM in average, which proves that the proposed text input method enables much faster text input than the existing keyboard-based text input methods.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.127-136
• /
• 2013

This report is aimed to be used as the basic research resource about the various form expression about the picture books, based upon the analysis whether male and female children are different from their preferences to illustrations and whether the expression form between male and female children are different from the other. The objects of study are one hundred and sixteen's of 6 to 7 years old children (male 58 vs. female 58) who are able to understand the illustration. The two times of response surveys were done with one hand is to interview an individual child and the other hand is to fill out by children. The methods used in this study are composed of the representable, simple, exaggerated, and distorted form of expression in order to draw the detail and precise reactions of male and female children In the case of preference analysis of male and female about the illustration, both male and female prefer the distorted form which express contradictively rather than the real, representable, simple, and exaggerate form of expression or which expresses the distorted and the changed by the binding of different things. In the respect of the responses, the various responses were seen to the simple and the exaggerated form in comparative with the representable form. In the respect of the analysis of language response, the individual response was highly marked to the representable form, and the informational response, the heuristic response, and the imaginative response.

• Journal of the Korean Society of Radiology
• /
• v.2 no.4
• /
• pp.11-25
• /
• 2008

As breast cancer shows the highest incidence among women's cancers, the use of mammography is also increasing as a screening test. Mammography should produce high-quality images for accurate diagnosis. For this, it is necessary to manage the performance and image quality of mammography. Thus, in order to investigate quality control, the present study conducted a questionnaire survey of 37 hospitals registered as breast cancer medical examination centers in Gwang-Ju, concerning their quality control of mammography. In the results of surveying the characteristics of apparatus use for mammography, many respondents did not know about the equipment that they were using. Of the hospitals, 19 (49%) were using film, 19 (49%) CR, and 1 DR. In the results of asking how to do quality control, only 38% answered that they inspected according to the manual. In addition, all the surveyed hospitals had specialized agencies do quality control for them. As to the reason for using agencies, 65% mentioned limitations in personnel, time, distance, etc, and 44% mentioned the absence of machines and materials. These results suggest that quality control is being performed perfunctorily, as well as passively and indifferently as it relies on specialized agencies. Accordingly, it is necessary to provide regular education for enhancing people's perception of quality control and to perform quality control adequately in the presence of Radiologist.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.607-614
• /
• 2013

Nowadays, automotive manufacturers have developed various technologies to improve fuel economy and reduce harmful emissions. The ultra-lean direct injection engine is a promising technology because it has the advantage of improving thermal efficiency through the deliberate control of fuel and ignition. This study aims to investigate the development of a spray-guided-type lean-burn LPG direct injection engine through the redesign of the combustion system. This engine uses a central-injection-type cylinder head in which the injector is installed adjacent to the spark plug. Fuel consumption and combustion stability were estimated depending on the ignition timing and injection timing at various air-fuel ratios. The optimal injection timing and ignition timing were based on the best fuel consumption and combustion stability.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.98-106
• /
• 2003

Nondestructive test (NDT) provides much information on concrete without damage of structural functions. Of NDT methods, elastic wave propagation methods, such as ultrasonic pulse velocity (UPV) method and impact-echo (IE) method, have been successfully used to estimate the strength, elastic modulus, and Poisson's ratio of concrete as well as to detect the internal microstructural change and defects. In this study, the concretes with water-binder ratio ranging from 0.27 to 0.50 and fly ash content of 20% were made and then their longitudinal wave velocities were measured by UPV and IE method, respectively. Test results showed that the UPV is greater than the longitudinal wave velocity measured by the If method, i.e., rod-wave velocity obtained from the same concrete cylinder. It was found that the difference between the two types of velocities decreased with increasing the ages of concrete and strength level. Moreover, for the empirical formula, the dynamic Poisson's ratio, static and dynamic moduli of elasticity, and velocity-strength relationship were determined. It was observed that the Poisson's ratio and the modulus of elasticity determined by the dynamic method are greater than those determined by the static test. Consequently, for the more accurate estimation of concrete properties using the elastic wave velocities, the characteristics of these velocities should be understood.