• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1205-1215
• /
• 1992

The solidification rate is of special importance in determining the casting structures and properties. The heat transfer characteristics at the interface between the mold and the casting is one of the major factors that control the solidification rate. The thermal resistance exists due to the air-gap formation at the mold/casting interface during the freezing process. In this study two-dimensional Stefan problem with air-gap resistance in the rectangular mold is considered and the heat transfer characteristics is numerically examined by using the enthalpy method. The effects of the major parameters, such as mold geometry, thermal conductivity, heat transfer coefficient, and initial temperature of casting, on the thermal characteristics are investigated.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.63.1-63.1
• /
• 2010

수중구조물에 의한 파랑의 변형을 예측하기 위해 3차원 수치모형을 도입하여 수치모형 실험을 수행하였다. 본 수치모형은 Navier-Stokes 방정식을 유한차분법을 이용하여 계산하는 동수압 모형으로서, 난류의 해석을 위해서 상대적으로 큰 에디(eddy)만을 고려하는 SANS(Spatially Averaged Navier-Stokes) 방정식의 해를 구하는 LES(large-eddy-simulation) 기반의 수치모형이다. 엇갈림 격자체계에서 유한차분법을 사용하여 지배방정식을 해석하는 모형으로서 수치기법으로 Two Step projection 기법을 사용하여 SANS 방정식을 계산하였으며, Bi-CGSTAB 기법을 이용하여 Poisson 방정식의 해를 구하고 압력장을 계산하였다. 또한, 자유수면의 추적을 위하여 2차 정확도의 VOF(volume-of-fluid) 기법을 사용하였다. 먼저 선형파를 일정 수심상에서 조파시켜 해석해와 비교한 후 수중구조물이 설치된 지형에 적용하여 파랑의 변형을 수치모의하여 수리모형 실험 결과와 비교 및 분석하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.33-42
• /
• 2003

This paper deals with the FEM analysis of nonlinear sloshing of incompressible, invicid and irrotational flow in two dimensional rectangular tank. We use laplace equation based on potential theory as governing equation. For large amplitude sloshing motion, kinematic and dynamic free surface conditions derived from Bernoulli equation are applied. This problem is solved by FEM using 9-node elements. For the time integration and accurate velocity calculation, we introduce predictor-corrector time marching scheme and least square method. Also, numerical stability in tracking of free surface is obtained by direct calculation of free surface location to time variation. Numerical results of sloshing induced by harmonic excitations, while comparing with those of linear theory and references, prove the accuracy and stability. After verification of our program, we analyze sloshing response characteristics to the fluid height and the excitation amplitude.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.48-55
• /
• 1999

In this paper, the ill-posed inverse problem of surface waves caused by a two-dimensional pulsating pressure distribution on the free surface is studied using the regularization method. In order to exemplify the method, a cosine pressure distribution on a limited range of the undisturbed free surface is considered. By taking the resulting horizontal velocity as input data, the corresponding pressure is determined numerically by three different regularization schemes. It is found that the iterated Tikhonov method provides with the most accurate result, while solutions obtained from the Landweber-Friedman regularization are most stable.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.32-39
• /
• 1999

In this paper, the characteristics of the ray tracing method (RTM) based on the cylindrical wave are discussed for the high frequency vibration analysis of two-dimensional structures. A ray tube describing the emanating cylindrical wave is used to derive the governing equation for incident reflected, and transmitted ray tubes which satisfies the condition at the coupled boundary. The suggested ray model is applied to panel array structures, and the predicted results for 2-panel, 3-panel, and 4-panel array structures are compared to those by Statistical energy analysis (SEA) and Wave intensity analysis(WIA). More enhanced prediction was obtained compared to the SEA, and similar prediction performance was observed to the WIA. Additionally, the RTM has a novel feature that it can estimate the spatially smoothed distribution of vibration energy and vibration intensity. It is expected that the present RTM can be used as one of the useful tools for the high frequency vibration analysis of two-dimensional coupled structures.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.587-598
• /
• 2015

We examined various existing threshold methods for the determination of the first arrival time of acoustic emission (AE), and developed a new variable threshold method that could determine the first arrival time of AE more accurately and more quickly than existing methods. The new method, a modification of an existing threshold method, does not fix the threshold, but applies variable thresholds for the AE signals according to noise analysis. Two- and three-dimensional models were established to test the effectiveness of the new method. It could determine source locations of AE in a two-dimensional model 38.3% more accurately than the pre-existing threshold methods. Its accuracy improvement over the existing methods in a three-dimensional model was about 15.2%. A practical test involved measuring the source locations of AE during three-point bending tests of granite cores. The new method placed the sources closer to the fracture plane than did the pre-existing methods, indicating its superior (and quicker) ability to determine the source locations of AE.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.1-9
• /
• 2003

In the present study, a 3-D Parallel DSMC method in developed on unstructured meshes for the efficient simulation of rarefied gas flows. Particle tracing between cells in achieved based on a linear shape function extended to three dimensions. For high parallel efficiency, successive domain decomposition is applied to achieve load balancing between processors by accounting for the number of particles. A particle weighting technique is also adopted to handle flows containing gases of significantly dirrerent number densities in the same flow domain. Application is made for flow past a 3-D delta wing and the result is compared with that from experiment and other calculation. Flow around a rocket payload at 100km altitude is also solved and the effect of plume back flow from the nozzle in studied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.305-305
• /
• 2021

XP-SWMM은 EAP-SWMM의 Runoff 기능을 보완하고 2D 해석 기능을 새롭게 추가하여 만든 외산(XP Solutions) 프로그램으로 도시유역 유출량 산정, 우수관거 추적 등과 같은 모의가 가능한 종합 모형이다. 그 중 2차원 분석 기능(2D XP-SWMM)은 연산 결과를 Tu-Flow 모형에 대입한 도시침수 해석모형으로 실무에서 주로 사용되고 있다. 그러나 XP-SWMM은 수량 부분 외에도 수질 부분의 다양한 모형이 통합되어 있어 라이센스 가격이 상당히 높고, 국내 환경에 적합한 모형 수정 등 기술지원을 받기 어렵다는 단점을 갖고 있다. 또한, 실무 활용성이 높은 2차원 분석기능의 경우 모의에 소요되는 시간이 크다는 한계점을 갖고 있다. 2D XP-SWMM 연산의 소요시간이 큰 주요 원인은 계산 시간간격마다 큰 셀수의 행렬 계산을 반복하기 때문이며, 격자를 촘촘하게 설정할수록(행렬의 수가 증가할수록) 수치해석에 소요되는 시간은 기하급수적으로 늘어나게 된다. 2D XP-SWMM 연산은 편미분방정식을 계산하는 모형으로 반복법을 채택하고 있기 때문에 짧은 시간내에 침수해석을 진행해야하는 웹기반 초단기 홍수예경보 시스템 등에 활용하기에는 적합하지 않다. 본 연구에서는 2D XP-SWMM 보다 연산속도를 향상시킨 2차원 도시침수 모형을 개발하였다. 기존 XP-SWMM 중심의 실무 적용성을 유지하고자 XP-SWMM과 동일하게 EPA-SWMM 엔진을 활용하였고 DEM 기반의 지표수 흐름방향 결정 알고리즘을 결합하였다. 본 연구에서 개발한 도시침수 모형 결과를 울산광역시, 청주시 등 도심지에서 발생한 과거 침수피해의 양상과 비교하여 그 타당성을 검증하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.277-282
• /
• 2006

The purpose in having a control surface on a ship is to control the motion of the ship. The control surface may be composed entirely of a single movable surface or of a combination of fixed and movable portion A control surface has one sole function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of this rotation and angle of attack then determine the maneuvering characteristics of the ship. In this paper the study of flapped rudder's 2-dimensional section was accomplished. Model tests had been carried out with different angles of attack of a main foil and flap's deflection angles to predict the performance of the flapped rudder and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flow field $Re=2.8\times10^4$ had been used during the whole experiments and measured results had been compared with each other.

• Spatial Information Research
• /
• v.13 no.2 s.33
• /
• pp.129-138
• /
• 2005

In this paper, a 3D position tracking algorithm for a moving objects using a stereo CCD cameras was proposed. This paper purposed the method to extract the coordinates of the moving objects. That is improve the operating and data processing efficiency. We were applied the relative orientation far the stereo CCD cameras and image coordinates extraction in the left and right images after the moving object segmentation. Also, it is decided on 3D position far moving objects using an acquired image coordinates in the left and right images. We were used independent relative orientation to decide the relative location and attitude of the stereo CCD cameras and RGB pixel values to segment the moving objects. To calculate the coordinates of the moving objects by space intersection. And, We conducted the experiment the system and compared the accuracy of the results.