• Title/Summary/Keyword: 2차원 이송-분산 모형

Search Result 20, Processing Time 0.031 seconds

Predicting Longitudinal Dispersion Coefficient of Two-dimensional Model for Analysis of Mixing in Natural Streams (하천 혼합 해석을 위한 2차원 이송-분산 모형의 종분산계수 예측)

  • Seo, Il Won;Choi, Hwang Jeong
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.75-75
    • /
    • 2015
  • 오염원과 취수장이 동일 구간 내에 공존하는 국내하천의 특성상, 하천 평면 내에서 오염물의 거동 및 혼합 특성을 보다 정확하게 해석하기 위해서는 2차원 이송-분산 모형의 적용이 필요하다. 이를 위해서는 2차원 모형의 주요 매개변수인 종분산계수와 횡분산계수의 적절한 입력이 매우 중요하다. 하지만 국내외적으로 횡분산계수에 대한 연구는 많이 진행된 반면, 현재까지 종분산계수에 대한 연구는 충분히 이루어지지 않은 실정이다. 분산계수를 결정하는 방법에는 실측된 농도 자료의 유무에 따라 크게 두 가지로 분류된다. 실측된 농도 자료가 없는 경우, 이론식이나 경험식을 이용하는 방법이 있다. 반면에 추적자 실험 등을 수행하여 실측된 농도 자료가 있는 경우, 모멘트법 또는 추적법을 적용하여 농도-시간 분포 곡선으로부터 분산계수를 계산하는 것이다. 모멘트법은 임의 지점에서 농도의 횡분포를 통해 얻을 수 있는 2차 모멘트의 종방향 변화율이 횡분산계수와 비례한다는 원리를 이용한 것이며, 추적법은 상류부의 관측된 농도를 입력자료로 하여 하류부의 농도를 계산한 후 계산된 농도와 실측된 하류부 농도의 비교를 통해 분산계수를 산정하는 방법이다. 본 연구에서는 불규칙한 단면 형상을 가지는 자연하천에서의 2차원 종 횡분산계수를 산정하기 위해서 Baek & Seo(2010)가 제안한 2차원 유관추적법(2D Stream-tube Routing Procedure)을 적용하였다. 본 연구에서는 국내 자연하천 중 다양한 사행형태를 갖으며 수질오염 사고의 위험이 높은 구간을 선정하고, 추적자로서 Rhodamine WT를 이용하여 현장실험을 수행하였다. 실험에서 수집된 수리량 및 농도자료로부터 추적자의 2차원적 거동을 분석하였으며, 2차원 유관추적법을 적용하여 종분산계수를 산정하였다. 그 결과 하폭 대 수심비(W/H)와 마찰손실관련 무차원변수(U/U*)의 증가에 따라 종분산계수가 증가됨을 확인 할 수 있었다. 본 연구에서 산출된 종분산계수와 선행 연구에서 수집된 자료를 이용하여 추정식을 개발하였다. 차원해석을 통해 무차원 종분산계수에 영향을 미치는 무차원 인자를 선별하고 회귀분석을 이용하여 종분산계수 추정식을 유도하였다. 추정식을 이용하여 산정한 종분산계수의 범위는 Elder (1959)가 제안한 이론값보다 약 10배 정도로 크게 나타났다. 혼합 특성이 밝혀지지 않은 자연하천에 2차원 확산모형을 적용하고자 할 때 본 연구에서 개발된 추정식으로부터 계산된 종분산계수를 사용할 수 있을 것이다.

  • PDF

Development of Sequential Mixing Model for Analysis of Shear Flow Dispersion (전단류 분산 해석을 위한 순차혼합모형의 개발)

  • Seo, Il Won;Son, Eun Woo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.4B
    • /
    • pp.335-344
    • /
    • 2006
  • In this study, sequential mixing model (SMM) was proposed based on the Taylor's theory which can be summarized as the fact that longitudinal advection and transverse diffusion occur independently and then the balance between the longitudinal shear and transverse mixing maintains. The numerical simulation of the model were performed for cases of different mixing time and transverse velocity distribution, and the results were compared with the solutions of 1-D longitudinal dispersion model (1-D LDM) and 2-D advection-dispersion model (2-D ADM). As a result it was confirmed that SMM embodies the Taylor's theory well. By the comparison between SMM and 2-D ADM, the relationship between the mixing time and the transverse diffusion coefficient was evaluated, and thus SMM can integrate 2-D ADM model as well as 1-D LDM model and be an explanatory model which can represents the shear flow dispersion in a visible way. In this study, the predicting equation of the longitudinal dispersion coefficient was developed by fitting the simulation results of SMM to the solution of 1-D LDM. The verification of the proposed equation was performed by the application to the 38 sets of field data. The proposed equation can predict the longitudinal dispersion coefficient within reliable accuracy, especially for the river with small width-to-depth ratio.

Data Sampling Using Oversampling Technique for Estimating Two-Dimensional Dispersion Coefficients (2차원 분산계수 경험식 산정을 위한 오버샘플링 기법 활용 데이터 샘플링)

  • Lee, Sun Mi;Park, In Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.449-449
    • /
    • 2021
  • 하천 내 오염물질 유입원은 하수처리장과 같이 농도를 예측 가능한 점오염원이 일반적이지만, 수질오염사고와 같이 다량의 유해물질이 일시에 하천에 유입되는 경우도 발생하곤 한다. 특히 오염물질 유입지점과 취수장이 인접한 경우, 오염물질 혼합해석에 대한 이해가 오염사고 대응 및 수질 관리 측면에서 매우 중요하다. 자연하천에서는 사행에 따른 유속 구조의 불균일성 등으로 인하여 오염물질의 이송 및 분산 과정은 매우 복잡하게 나타난다. 이러한 하천의 지형적, 수리학적 특성이 오염물질의 혼합 거동에 미치는 영향을 정확하게 모의하기 위해서는 3차원 수치모형을 적용해야 한다. 그러나 대부분의 하천은 하폭 대 수심비가 매우 크기 때문에 2차원 이송-분산 방정식을 지배방정식으로 채택하는 2차원 수치 모형이 널리 사용되어왔다. 2차원 이송-분산 방정식의 해석결과는 입력된 종, 횡 분산계수의 값에 따라 변화하기 때문에 정확한 혼합해석을 위해 분산계수의 결정이 매우 중요하다. 과거 연구에서는 횡 분산계수의 결정을 위해 기본 수리량을 이용한 경험식을 활용하여 계산한 바 있다. 종 분산계수의 경우에는 경험식의 산정에 필요한 충분한 실험 자료가 축적되어 있지 않아 이상적 흐름 상태를 가정하여 유도된 Elder의 이론식(Elder, 1959)을 사용해왔다. 하지만 많은 연구에서 이러한 Elder의 이론식이 종 분산계수를 과소산정 할 우려가 있다고 제시했다. 따라서 하천의 전단류 분산특성을 나타낼 수 있는 데이터 확보를 통해 종 분산계수의 경험식 산정 및 횡 분산계수의 정확도 향상이 필요한 상황이다. 본 연구에서는 기존 선행 연구에서 수행된 2차원 추적자실험 데이터의 확장을 위해 오버샘플링 기법을 적용하였으며, 이를 통한 머신러닝을 통한 분산계수 산정 가능성을 분석하고자 한다. 부족한 추적자 실험 데이터를 확장하기 위해 오버샘플링 기법 중 SMOTE 기법을 활용했다. 오버샘플링 기법을 이용하여 생산된 데이터의 신뢰성을 검증하였으며, 추후 머신러닝을 이용한 2차원 종, 횡 분산계수 산정에 대한 활용 가능성을 분석했다.

  • PDF

Development of Streamtube Routing Model for Analysis of Two-Dimensional Pollutant Mixing in Rivers (하천 오염물질의 2차원 혼합 해석을 위한 유관추적모형의 개발 및 적용)

  • Baek, Donghae;Seo, Il Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.88-88
    • /
    • 2020
  • 수심평균 2차원 혼합모형은 하천환경에서 다양한 용존성 오염물질의 혼합현상을 모의하기 위해 널리 활용되어왔다. 2차원 혼합모형에서 분산계수는 하천의 전단 흐름에 의해 야기되는 오염물질의 퍼짐 현상을 표현하는 중요한 인자로서 작용하기 때문에 정교한 오염물질 혼합거동을 모의하기 위해서는 적합한 분산계수를 산정하는 것이 필수적이다. 분산계수를 실험적으로 산정하는 방법으로는 크게 모멘트법과 추적법으로 나뉘며, 비정상상태의 혼합거동에 대해 종방향 및 횡방향 분산계수를 동시에 산정할 수 있는 방법은 추적법 계열의 2차원 유관추적법(2D STRP)이 유일하다. 본 연구에서는 하천에 유입된 오염물질의 2차원 혼합해석을 위한 수치모형을 개발하였으며, 개발된 모형의 수치해를 바탕으로 다양한 Peclet 수의 범위에 대해 기존연구에서 제시된 2D STRP의 적용범위 및 성능을 정량적으로 분석하였다. 분석된 정보를 바탕으로 기존 2D STRP의 한계를 극복하기 위한 개선된 2차원 유관추적법(2D STRP-i)을 개발하고, 사행하천을 모형화한 실규모 하천실험시설에서 검증하였다. 기존 2D STRP의 성능평가 결과, Peclet 수가 낮은 조건일수록 농도분포의 예측 정확도가 감소하는 경향을 보였으며, 하안 경계에 도달하는 농도가 증가할수록 부정확한 결과를 초래하는 것으로 나타났다. 본 연구에서는 기존 2D STRP의 한계를 보완하여 더욱 정확한 분산계수를 산정하고자 하안 경계면 조건을 고려한 2차원 유관추적법(2D STRP-i)을 개발하였다. 2D STRP-i는 직교-곡선좌표계 기반의 2차원 이송-분산 방정식을 바탕으로 횡방향 유속분포 및 하안 경계조건을 고려할 수 있도록 개선되었다. 2D STRP-i는 공간적으로 상이한 이송효과 및 하안경계 조건을 적절히 반영함으로써 농도분포의 예측 정확도를 개선 시키는 것으로 평가되었으며, 하안경계면에서 농도가 증가하는 구간에서 기존 2D STRP의 결과와 비교하여 더욱 정확한 농도분포 및 분산계수를 제공하는 것으로 밝혀졌다.

  • PDF

Development of 2-D Advection-Dispersion Model with Dispersion Tensor Considering Velocity Field (유속장을 고려한 분산텐서를 포함한 2차원 이송-분산모형의 개발)

  • Seo, Il Won;Lee, Myung Eun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.2B
    • /
    • pp.171-178
    • /
    • 2006
  • The finite element model based on the 2-D advection-dispersion equation incorporating the dispersion tensor that is calculated using velocity field data was developed in order to analyze more accurately 2-D mixing of pollutants for meandering streams. The proposed model was tested using the straight channel that inclined at 45o in the Cartesian coordinate system. The simulation results showed that dispersion tensor model using velocity field data gives an accurate solution. The suitability of the proposed model in analyzing actual pollutant mixing in meandering channels was demonstrated by comparing the simulation results with experimental data obtained from the tracer tests in the laboratory flume. Comparison results showed that the proposed model with dispersion tensor can represents more accurately the mixing phenomena of the pollutants in the meandering channels in which the direction of the primary flow is varying periodically along the channel.

Time-split Mixing Model for Analysis of 2D Advection-Dispersion in Open Channels (개수로에서 2차원 이송-분산 해석을 위한 시간분리 혼합 모형)

  • Jung, Youngjai;Seo, Il Won
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.2
    • /
    • pp.495-506
    • /
    • 2013
  • This study developed the Time-split Mixing Model (TMM) which can represent the pollutant mixing process on a three-dimensional open channel through constructing the conceptual model based on Taylor's assumption (1954) that the shear flow dispersion is the result of combination of shear advection and diffusion by turbulence. The developed model splits the 2-D mixing process into longitudinal mixing and transverse mixing, and it represents the 2-D advection-dispersion by the repetitive calculation of concentration separation by the vertical non-uniformity of flow velocity and then vertical mixing by turbulent diffusion sequentially. The simulation results indicated that the proposed model explains the effect of concentration overlapping by boundary walls, and the simulated concentration was in good agreement with the analytical solution of the 2-D advection-dispersion equation in Taylor period (Chatwin, 1970). The proposed model could explain the correlation between hydraulic factors and the dispersion coefficient to provide the physical insight about the dispersion behavior. The longitudinal dispersion coefficient calculated by the TMM varied with the mixing time unlike the constant value suggested by Elder (1959), whereas the transverse dispersion coefficient was similar with the coefficient evaluated by experiments of Sayre and Chang (1968), Fischer et al. (1979).

Development and Verification of Horizontal 2-D Finite Element Model For Analysis of BOD and DO Transport (BOD와 DO 거동 해석을 위한 수평 2차원 유한요소모형의 개발 및 검증)

  • Seo, Il-Won;Choi, Hwang-Jeong;Song, Chang-Geun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.749-753
    • /
    • 2010
  • 본 논문에서는 하천에 유입되는 오염물질 중 대부분을 차지하는 비보존성 오염물질의 확산거동을 분석하기 위해 2차원 수심 평균된 이송분산방정식에 유한요소법을 적용하였다. 수치모형 구성을 위해 SUPG(Streamline-upwind Petrov-Galerkin)법을 이용한 가중잔차법을 사용하였다. 모의대상 수질인자는 BOD와 DO이며, BOD 농도 결과가 DO 농도 계산에서의 입력 자료로 이용되도록 상호 연계를 형성하였다. 모형의 검증을 위하여 직사각형 수로에 선원으로 연속주입하여 얻은 수치해와 해석해를 비교하였다. 비교결과 수치해와 해석해의 결과가 서로 일치하는 것을 볼 수 있었다.

  • PDF

Modeling of 2-D Advection-Diffusion in Natural Streams Using Particle Discrete Probability Distribution Model (입자의 이산확률분포 모형을 이용한 자연하천의 2차원 이송-확산)

  • Kim, Yeong-Do;Seo, Il-Won
    • Journal of Korea Water Resources Association
    • /
    • v.34 no.5
    • /
    • pp.499-509
    • /
    • 2001
  • 2-D transport model based on a discrete probability distribution for a particle displacement was developed too solve advection-diffusion problems in natural stream. In this proposed model, the probabilities expressed as an average and variance function were used to predict the mass transfer between cells in one time step. The proposed model produces solutions without numerical dispersion for constant velocity, diffusion coefficient, and cross-sectional area. When the stability and positivity restrictions were satisfied, the model produced excellent results compared to analytical solutions and other finite difference methods. The proposed model is tested against the dispersion data collected in the Grand River, Canada. The simulation results show that the proposed model can properly describe the two-dimensional mixing phenomena in the natural stream.

  • PDF

Application of Drone for Analysis of 2D Pollutant Mixing in River (하천에 유입된 오염물질의 2차원 혼합 분석을 위한 드론의 활용)

  • Seo, Il Won;Baek, Donghae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.100-100
    • /
    • 2017
  • 하천에 유입된 오염물질의 2차원 혼합거동은 하천 주흐름에 의한 이송현상과 유속 성분의 수심평균 값에 대한 공간적 편차로부터 야기되는 분산현상으로 설명 할 수 있다. 이는 3차원 이송확산 방정식으로부터 수심 적분된 2차원 이송-분산 방정식으로 수학적 유도가 가능하며, 수심방향으로 적분하는 과정에서 발생되는 농도의 분산항은 Taylor Dispersion 개념에 기초하여 종방향 및 횡방향의 2차원 분산계수로 표현된다. Fischer(1978)는 연직방향 유속분포로부터 2차원 분산계수를 추정하는 해석해를 수학적으로 유도하였으나, 실제 하천에서 정밀한 연직방향 유속분포를 계측하는 것은 많은 비용 및 노동력을 초래한다. 따라서 선행 연구자들은 2차원 혼합모형의 분산계수를 산정하고자 실험적 방법으로써 추적자실험을 수행하였다. 추적자실험은 추적자 물질을 수체에 주입한 후 농도의 변화를 관측함으로써 추적자물질이 하천에서 이송 및 분산되는 과정을 이해하는데 유용하다. 기존의 추적자실험은 고정된 위치에서 농도를 계측하여 시계열적인 농도의 변화를 관측한 후, 오염운 동결가정을 통해 종,횡방향 분산계수의 산정이 가능하지만, 오염물질 농도의 공간적 분포를 얻기에는 한계가 있다. 본 연구에서는 기존의 추적자실험법의 한계를 극복하고자 형광물질을 이용한 추적자실험을 수행함과 동시에 드론에 장착된 디지털카메라를 이용하여 항공영상을 취득 및 분석하여, 하천에 주입된 형광물질의 농도분포를 시공간적으로 추출하는 기법을 개발하고, 이를 바탕으로 오염물질의 2차원 혼합거동을 분석하였다. 본 실험은 한국건설기술연구원의 안동하천실험센터의 A3실험수로에서 수행되었으며, 실험수로는 평균 하폭 5 m, 평균 수심 0.44 m, 유량 $0.96m^3/s$의 실제 소규모 하천과 유사한 축척을 가지고 있다. 추적자물질은 Rhodamine WT 용액이 사용되었으며, 실험수로 내 설치된 15개의 형광광도계(YSI-600OMS)를 이용하여 농도를 측정하였다. 항공영상의 취득을 위해 이용된 드론은 DJI-Phantom 3 Professional 이며, 3840x2160의 해상도로 초당 30 frame의 동영상으로 취득되었다. 영상의 정합 및 좌표화를 위해 RTK-GPS를 이용하여 12개의 지상 기준점의 좌표를 취득한 후, 사영변환을 통해 영상좌표를 지상좌표로 변환하였다. 영상의 픽셀값을 농도장으로 변환하기 위해 각 RGB 밴드의 픽셀값을 통계적으로 분석하여 농도장으로 변환하였으며, 영상으로부터 얻은 농도장은 형광광도계에 의해 실측된 농도와 결정계수 0.9이상의 수준으로 정확도를 나타냈다.

  • PDF

Estimation of Mass Error in the Simulation of Mixing of Instantaneously Released Pollutants (순간 유입된 오염물질의 혼합 모의 시 질량 오차 산정)

  • Lee, Myung Eun;Seo, Il Won
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.5B
    • /
    • pp.475-483
    • /
    • 2008
  • 2D finite element model for analysis of transport of accidentally released pollutants in the flow was developed by SUPG method, and the mass balance of this model was checked though two example problems: line source and point source problem in the straight channel and unidirectional 2D flow field, respectively. All the test cases were simulated with both SUPG and conventional Galerkin method to compare the accuraccy of the numerical mass balance. Test results show that the model with SUPG can adequately conserve the released mass though simulation than the model using Galerkin method, so the developed model verified to be appropriate to solve this accidental mass release problem.