• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.334-338
• /
• 1999

Porous silicon layers were fabricated with various conditions of HF concentration and current density. And their masses were measured. From these data, the porosity and fractal dimension were estimated and analyzed. We found that the porosity was proportional to the current density when the anodic reaction time was fixed and the constant values of fractal dimension could be estimated from a series of data with fixed HF concentration. The values of fractal dimension were decreased with increasing HF concentration. The obtained porosity and fractal dimension were compared with the 2-dimensional computer simulation based on diffusion limited deposition model. According to the simulation, the porosity was proportional to the diffusion length and the fractal dimension was inversely proportional to the diffusion length. Since, the diffusion length is proportional to current density and inversely proportional to base concentration, our experimental data qualitatively agreed with the results from the simulation. The porosity obtained by experiments, however, was not consistent with the results by simulation.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.359-362
• /
• 1998

2차원 혼합 모드 소자-회로 시뮬레이터를 이용한 과도상태 해석의 알고리즘을 제시한다. 1변수 muller 및 regular falsi법을 회로의 절점 전압과 분기(branch) 전류를 계산하는데 적용하였다. 제안된 알고리즘의 정확도와 유호성을 검증하기 위해 PN 다이오드의 양극(anode)에 저항이 직렬로 연결된 회로의 모의실험을 수행한 결과, MEDICI의 모의실험 결과에 비해 과도상태에서 전류 및 전압 특성은 각각 0.06%, 0.2% 오차 범위 한도 내에서 일치함을 보였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.31-35
• /
• 1998

지진해일 수치해석시 일반적으로 사용되어오던 Shuto의 유한차분모형(Goto ＆ Shuto, 1983)은, 천수방정식을 사용하고 파의 분산효과는 수치오차를 이용하여 고려하므로, 정해진 계산시간간격($\Delta$t)에 대해 수심에 따라 격자간격을 적절히 선택하여야 한다. 또한 Shuto 모형은 leap-frag 기법을 사용하므로, 격자 및 계산시간간격이 심해에서 수치분산을 위한 조건을 만족시켰다 할지라도, 천수화에 의해 파장이 점점 작아져 파수(k)가 $\pi$/$\Delta$x가 되는 수심(2$\Delta$x wave)에 이르면 파가 더 이상 진행하지 못하고 반사하게 되므로 실제 현상과는 다른 결과를 보이게 된다. (중략)

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.93-105
• /
• 2012

This paper compares the two- and three-dimensional (2D and 3D) approaches for the numerical determination of the equivalent mechanical properties of fractured rock masses. Both orthogonally-fractured model and discrete fracture networks (DFN) were used for the geometry and 2D models were cut in various directions from 3D model to compare their mechanical properties. Geological data were loosely based on the data available from Sellafield, UK. Analytical method based on compliance tensor transformation was used for investigation in orthogonally fractured rock and numerical experiments were conducted on fractured rock mass with DFN geometry. It is shown that 2D approach always overestimates the elastic modulus of fractured rock masses by a factor of up to around two because fractures are assumed to be perpendicular to the model plane in 2D problems. Poisson ratios tend to have larger values in 2D analysis while there is opposite trend in some sections. The study quantitatively demonstrates the limitation of the 2D approach that uses the simplified model from true 3D geometry.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.1-7
• /
• 2007

In this paper, we analyze geometrical relations of 3D shape reconstruction from 2D images taken under anne projection. The purpose of this research is to contribute to more accurate 3-D reconstruction under noise distribution by analyzing geometrically the 2D to 3D relationship. In situation for no missing feature points (FPs) or no noise in 2D image plane, the accurate solution of 3D shape reconstruction is blown to be provided by Singular Yalue Decomposition (SVD) factorization. However, if several FPs not been observed because of object occlusion and image low resolution, and so on, there is no simple solution. Moreover, the 3D shape reconstructed from noise-distributed FPs is peturbed because of the influence of the noise. This paper focuses on analysis of geometrical properties which can interpret the missing FPs even though the noise is distributed on other FPs.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.48-56
• /
• 2004

This research focuses on the development of a fast datum transformation model to be used in GIS that utilizes real-time data transformation. Instance, when a GIS data constructed according to a datum is conformed to another datum, instead of transforming the axes of the original data, the data is transformed right before the results are reflected on the monitor. In this research, the prospects of calculating transformation parameters for every grid cells on the area based on two-dimensional conformal transformation model in order to decrease real-time datum transformation time while maintaining a high accuracy has been investigated. Research results showed that for a fixed area, the accuracies of the two-dimensional conformal transformation and the three-dimensional datum transformation, which requires more computing time, were almost equal and fast transformation speed, high accuracy real-time datum transformation is made feasible by implementing the grid-divided two-dimensional conformal transformation model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.147-147
• /
• 2012

댐 및 제방 등의 수공구조물 붕괴에 의한 극한홍수 전파를 해석하기 위한 2차원 홍수 해석기법에는 현재까지 다양한 기법들이 개발되어 왔고 다양한 모형들이 상용화 또는 범용화 되고 있다. 그 중 흐름의 전파양상을 정확하게 반영할 수 있는 상류이송기법인 Godunov형태의 유한체적기법은 충격파와 같은 불연속적인 해를 가지는 문제를 정확히 해석할 수 있고, 비구조적 격자 사용의 용이성 등의 장점 때문에 2차원 홍수파 전파 해석에 있어서 최근 십수년간 가장 활발하게 연구되어왔다. 하지만 이러한 기법은 양해법을 근간으로 하는 해석 기법으로써, 계산거리의 간격이나 계산시간의 간격, 격자망의 구성 등 엄격한 제한이 필요하다. 특히 방대한 계산시간을 요구하는 기법의 약점은 홍수예 경보 등을 위한 실시간 모형의 구동에 있어서 큰 제약이 되어 왔다. CPU의 성능이 지속적으로 발전하면서 이러한 문제는 점차 극복되어 왔으나, 발열 등의 문제와 이를 극복하기 위한 멀티코어의 등장으로 인해 단일 코어의 성능개발은 매우 더딘 것이 사실이다. 현재까지 연구되고 개발되어 온 모형들은 특별한 처리 없이는 단일 코어만을 사용하여 계산할 수 밖에 없기 때문에 멀티코어의 장점을 전혀 이용할 수 없다. 이러한 점을 극복하기 위해 프로그램을 병렬화하여 단일 문제에 대해 멀티코어를 사용할 수 있다면 계산시간 단축에 큰 효과를 거둘 수 있을 것이다. 현재까지 IT분야에서 다양한 병렬프로그래밍 기법들이 개발되고 소개되어 왔다. 본 연구에서는 병렬프로그래밍 기법중 가장 널리 사용되고 있는 MPI(Message Passing Interface)기법을 적용함으로써 기 개발된 고정확도 유한체적모형을 병렬화 하여 계산시간을 단축하고자 하였다. 개발된 모형을 장애물이 존재하는 실험하도의 댐 붕괴 문제와 2002년 태풍 루사 시 큰 피해를 입은 강릉시 일원의 섬석천 유역에 위치한 장현저수지와 동막저수지의 붕괴사례에 대해 적용하였다. 모형을 코어 개수별로 다양하게 모의함으로써 기존모형과의 결과에 대한 일치성을 확인하였고, 기존 모형 대비 계산시간 단축의 효과를 입증할 수 있었다. 개발된 본 모형을 실시간 홍수범람해석을 위한 시스템으로 구축할 수 있다면, 실시간 홍수예 경보에 있어 주요지점에서의 수위해석 뿐만이 아닌 제내지 범람 예보 분야까지 확대 적용할 수 있을 것으로 사료된다.

• Korean Journal of Remote Sensing
• /
• v.16 no.1
• /
• pp.65-72
• /
• 2000

Scattering coefficients of randomly rough lossy dielectric surfaces were computed by using the FDTD(Finite-Difference Time-Domain) method and the Monte Carlo method in this paper. The FDTD method was applied to compute electromagnetic wave scattering characteristics at any incident angles, any linear polarizations by dividing the computation region into the total-field region and the scattered-field region. The radar cross sections(RCS) of conducting cylinders have been computed and compared with theoretical results, measurement data and the results from the method of moment(MoM) to verify the FDTD algorithm. Then, to apply the algorithm to compute scattering coefficients of distributed targets, a two-dimensionally rough surface was generated numerically for given roughness characteristics. The far-zone scattered fields of 50 statistically independent dielectric rough surfaces were computed and the scattering coefficient of the surface was calculated from the scattered fields by using the Monte Carlo method. It was found that these scattering coefficients agree well with the SPM(Small Pertubation Method) model in its validity region.

• Journal of KIISE:Software and Applications
• /
• v.35 no.12
• /
• pp.789-799
• /
• 2008

For the communication between human and computer in an interactive computing environment, the gesture recognition has been studied vigorously. The algorithms which use the 2D features for the feature extraction and the feature comparison are faster, but there are some environmental limitations for the accurate recognition. The algorithms which use the 2.5D features provide higher accuracy than 2D features, but these are influenced by rotation of objects. And the algorithms which use the 3D features are slow for the recognition, because these algorithms need the 3d object reconstruction as the preprocessing for the feature extraction. In this paper, we propose a method to extract the 3D features combined with the 3D object reconstruction in real-time. This method generates three kinds of 3D projection maps using the modified GPU-based visual hull generation algorithm. This process only executes data generation parts only for the gesture recognition and calculates the Hu-moment which is corresponding to each projection map. In the section of experimental results, we compare the computational time of the proposed method with the previous methods. And the result shows that the proposed method can apply to real time gesture recognition environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.557-562
• /
• 2006

In order to predict the dispersion of suspended sediment arising from dredging operation in port and navigation channel, a hybrid model for dispersive transport of turbidity plume was developed using Lee's(1998) hybrid method. Using hybrid modeling scheme advection-diffusion equation was solved by the forward particle-tracking method for advection process and by the fixed Eulerian grid method for diffusion process. To examine numerical model simulation in accuracy, the simulated results for 1-D, 2-D, and 3-D cases were compared with the analytical solutions including Kuo, et al's (1985) 3-D mathematical model. The model results were in a good agreement with the analytical solutions and mathematical model for the dispersion of turbidity plume.