• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.85-92
• /
• 2001

중력이 작용하는 압축성유체를 고려함에 있어, 밀도성층 뿐만 아니라 엔트로피 성층의 고려도 중요하다. 본 연구에서 압축성격자볼츠만 유체모델을 이용한 차분계산법을 이용하여 2차원 채널에서 성층류의 전형적인 형상인 선택취수현상을 시뮬레이션 하였으며, 본 모델의 유효성을 확인하였다. 또한 비점성, 비압축성유체의 선택취수흐름과의 차이에 관해서 압축성의 관점에서 고찰하였다.

• Journal of computational fluids engineering
• /
• v.1 no.1
• /
• pp.47-54
• /
• 1996

비유선형 물체 주위의 유동은 정체유동, 경계층 박리 및 재부착, 주기적 와열의 생성등의 복잡한 유동현상이 공존한다. 이와 같은 유동의 2-방정식 난류모델을 이용한 정확한 예측은 일반적으로 불가능 하다고 인식되어 왔으나, 본 연구에서는 기존의 비교적 단순한 난류모델을 활용한 정사각주 주위의 비정상 난류유동의 예측 가능성을 체계적으로 규명하였다. 적절한 난류모델의 선정과 더불어 시간 정확도, 공간 정확도 및 대류항 처리법 등이 해석의 결과에 미치는 영향을 살펴 보았다. 기존의 표준 κ-ε모델은 정체점 주위에서 난류생성항의 과도한 예측으로 말미암아 재부착 및 와열생성의 정확한 예측이 불가능 하였으나, RNG κ-ε 모델을 사용한 경우 이와 같은 현상을 제거 할 수 있었다. 그러나 이 경우에도 예측의 정확도가 시간 증분, 격자의 크기 및 대류항 처리법 등에 영향을 받았으며, 특별히 대류항 처리법에 따라 상당히 민감하게 변하는 것을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.139.1-139.1
• /
• 2015

열플라즈마 토치 및 자유연소아크 시스템 개발이 증가함에 따라 실험을 통해 얻기 어려운 물리적 특성들을 파악하기 위해 전산유체역학을 이용한 해석방법이 널리 이용되어 왔다. 대부분의 경우에 해석의 용이성을 위하여 2차원 축대칭으로 가정하여 계산을 수행하지만, 2차원 해석만으로는 실제 물리적인 현상을 정확하게 반영하기 힘들다. 따라서 보다 실질적인 결과를 얻기 위해서는 기존의 2차원 해석방법을 3차원 해석방법으로 변환할 필요성이 있다. 본 논문에서는 3차원 열플라즈마 해석을 위한 첫 단계로써 상용 CFD 프로그램인 ANSYS CFX를 사용하여 동일한 해석모델에 관하여 2차원 해석과 3차원 해석을 수행하였다. 해석방법 및 결과의 타당성을 평가하기 위하여 Schnick-Fuessel 모델 (SF 모델)과 Haddad-Farmer 모델 (HF 모델)을 선정하여 각각의 모델에 대한 해석결과를 문헌에서 발췌한 실험결과 등과 비교하였다. 이러한 결과 비교를 통해서 본 연구에서 적용한 열플라즈마 해석에 관한 수치해석 방법이 충분히 3차원 해석으로 확장 가능함을 확인할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.2
• /
• pp.198-208
• /
• 1995

Combining Iwan-Blevin's model into the approximated form of the nonlinear model derived for the dynamic analysis of the riser system with the inclusion of internal flow, current-vortex model is developed to investigate the effect of internal flow on vortex-induced vibration due to inline current The riser system includes a steadly flow inside the pipe which is modeled as an extensible or inextensible tubular beam. Galerkin's finite element approximation are implemented to derive the matrix equation of equilibrium for the finite element system. The investigations of the effect of internal flow on vibration due to inline current are performed according to the change of various parameters such as top tension, infernal flow velocity. current velocity, and so on. It is found that the effect of internal flow on vibration due to vortex shedding can be controlled by the increase of top tension. However, careful consideration has to be given, in design point in order to avoid the resonance band occurding near vortex shedding frequency, particularly for the long riser.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.309-312
• /
• 2007

The cryogenic fluid is the propellant for the liquid rocket engine. The design of space launcher vehicle is guided by minimum size and weight criteria, so the turbo pump solicits high impeller speed. Such high speed results in a zone of pressure drop below vapor pressure causing caivtation around inducer blades. The cryogenic fluid has different characters from isothermal fluid like water. The cryogenic fluid has very sensible thermodynamic properties and the phase change undergoes evaporative cooling. So, the developed code has to be modified cavitation modeling and it is added the energy equation for temperature sensitivity.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.83-91
• /
• 2024

The purpose of this study was to determine the doppler fluid effects of carbonated water (CBW) in a bi-directional flow phantom model. A bi-directional flow phantom model was chosen to realize arterial and venous flow, and the structure of the inner and outer tanks allowed for fluid circulation and also made the size of the phantom small. Carbonated water (CBW), salt fluid (SAF), sugar fluid (SUF), and distilled water (DW) were used as fluids, and ultrasound scans were performed at depths of 1.5 cm and 3.0 cm from the surface of the tank, using B-mode and color Doppler effects. All fluids tested showed color Doppler effects, but CBW had the highest doppler shift and the least variation with depth. In conclusion, we determined that CBW was the most suitable fluid to be used as a doppler fluid and confirmed that the bubbles dissolved in CBW act as doppler scatterers, just like red blood cells inside human blood. Therefore, it is possible that CBW can be used as a blood-mimicking fluid in doppler ultrasound phantoms through further research, and this study will provide basic data.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2
• /
• pp.92-101
• /
• 2008

To dissolve the multi-layered model problems, and to complement 2-layered model's simplicity, assumed fluid-fluid-solid 3-layered model. Generally it is known that if the sediment thickness is more than 10 wavelength, the half space's influence to the in-water acoustic field could be disregarded. By tracking the maximum correlation coefficient of calculated results and experimental ones we confirmed that the requirement could be more realized. To calculate the maximum correlation coefficient we used single sensor transmission loss. On the assumption that the sediment sound velocity was 1813 m/s and frequency range 50 kHz to 120 kHz, the conversion condition was from 2.5 to 7.7 wavelength.

• Journal of the Korean Society of Visualization
• /
• v.16 no.1
• /
• pp.37-41
• /
• 2018

The two-fluid model is widely used for practical applications involving multi-phase flows in chemical reactor, nuclear reactor, desalination systems, boilers, and internal combustion engine. There are several modeling terms in the two-fluid model, which must be determined properly. This study suggests the best models for turbulent vertical bubbly flow.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.155-163
• /
• 2019

Laminar mixed convection of a nanofluid consists of water and $Al_2O_3$ in a horizontal circular tube has been studied numerically. Two-phase mixture model has been used to investigate hydrodynamic and thermal behaviors of the nanofluid with variables physical properties. Three dimensional Navier-Stokes, energy and volume fraction equations have been discretized using the finite volume method. The Brownian motions of nanoparticles have been considered to determine the thermal conductivity and dynamic viscosity of $Al_2O_3$-Water nanofluid, which depend on temperature. The calculated results show good agreement with the previous numerical data. Results show that in a given Reynolds number (Re), increasing solid nanoparticles volume fraction and Richardson number (Ri) increases the convective heat transfer coefficient and wall shear stress.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.37-48
• /
• 2019

In geological $CO_2$ sequestration, the behavior of $CO_2$ within a reservoir can be characterized as two-phase flow in a porous media. For two phase flow, these processes include drainage, when a wetting fluid is displaced by a non-wetting fluid and imbibition, when a non-wetting fluid is displaced by a wetting fluid. In $CO_2$ sequestration, an understanding of drainage and imbibition processes and the resulting NW phase residual trapping are of critical importance to evaluate the impacts and efficiencies of these displacement process. This study aimed to observe migration and residual trapping of immiscible fluids in porous media via cyclic injection of drainage-imbibition. For this purpose, cyclic injection experiments by applying n-hexane and deionized water used as proxy fluid of $scCO_2$ and pore water were conducted in the two dimensional micromodel. The images from experiment were used to estimate the saturation and observed distribution of n-hexane and deionized water over the course drainage-imbibition cycles. Experimental results showed that n-hexane and deionized water are trapped by wettability, capillarity, dead end zone, entrapment and bypassing during $1^{st}$ drainage-imbibition cycle. Also, as cyclic injection proceeds, the flow path is simplified around the main flow path in the micromodel, and the saturation of injection fluid converges to remain constant. Experimental observation results can be used to predict the migration and distribution of $CO_2$ and pore water by reservoir environmental conditions and drainage-imbibition cycles.