• 제목/요약/키워드: 2,4-TDI

검색결과 105건 처리시간 0.024초

폴리우레탄 절연전선도료 제조시 TDI와 MDI의 Blocking 반응에 미치는 여러가지 반응조건의 영향에 관한 연구 (A Study on the Effects of Various Reaction Conditions on the Blocking Reactions of TDI and MDI in the Preparation of Polyurethane Varnishes)

  • 권석기;박내정;남윤기
    • 공업화학
    • /
    • 제8권2호
    • /
    • pp.308-314
    • /
    • 1997
  • 폴리우레탄 전선도료 제조시의 TDI와 MDI의 blocking 반응에 미치는 촉매와 blocking reagents(BR)의 영향에 대하여 조사하였다. 1,4-diazabicyclo[2.2.2]octane(DABCO)와 tetramethyl guanidine(TMG)와 같은 촉매들은 NCO의 blocking 반응을 완결시키는데 필요한 것으로 나타났다. TMG는 DABCO에 비해 매우 빠른 반응속도를 보였다. TMG의 농도는 1%까지 반응도에 대하여 정량적으로 비례하였다. DABCO의 경우는 0.25%의 농도에서 가장 높은 반응도를 나타내었다. BR의 입체영향을 알아보기 위해 phenol, p-cresol, m-cresol, o-cresol, 2,4-xylenol과 같은 BR 등을 사용하였다. 예측한대로 입체장애가 적은 BR이 높은 반응도를 보였다. 또한 이 반응 시스템에서는 온도와 BR의 농도가 증가할수록 반응도가 증가하였다.

  • PDF

Synthesis and Characteristic of Polyurethane Modified Silicone

  • Lee, Kangseok;Shim, Sang Eun
    • Elastomers and Composites
    • /
    • 제50권3호
    • /
    • pp.210-216
    • /
    • 2015
  • Polyurethane modified silicone (PUMS) was synthesized from various molecular weights of polydimethylsiloxane (PDMS 2000, PDMS 6000, PDMS 20000), polypropyleneglycol with molecular weight of 3000 g/mol (PPG 3000) and 2,4-toluenediisocyanate (TDI) under tin catalyst. Their structures were confirmed by the measurement of FT-IR and $^1H-NMR$, and the thermal properties were studied from DSC and TGA. Glass transition temperature of PUMS exhibited exothermic peak at $-63{\sim}-69^{\circ}C$, and residual weight was 19~35% at $800^{\circ}C$.

공기중 이소시아네이트류의 측정 및 분석방법에 관한 비교연구 (A Comparison of Sampling and Analytical Methods for Airborne Isocyanates)

  • 변혜정;윤충식;백남원
    • 한국환경보건학회지
    • /
    • 제22권2호
    • /
    • pp.32-42
    • /
    • 1996
  • This study was performed to evaluate accuracy and precision of filter method and impinger method for analyzin airborne isocyanates in mixture (2, 6-TDI, HDI, 2, 4-TDI, MDI). Filter method was performed using the OSHA Method 42 and impinger method using the NIOSH Method 5521. The samples were analyzed by high performance liquid chromatography-ultraviolet detector (HPLC-UVD). After the optimum operating conditions for each method were investigated, samples with various concentration levels were quantified at the conditions. The precision was expressed by the pooled coefficient of variation(C.V.) and the accuracy by overall accuracy. The results are summarized as follows: 1. The optimum condition of filter method was determined at 35/65 ACN/buffer (0.01 M ammonium acetate) in mobile phase. And in case of impinger method, it was at 30/70 ACN/buffer(0.2 M sodium acetate). The effect of concentrations of acetate on the separation of the peaks was not significant, but, the effect of ACN/buffer ratio was significant. 2. The correlation coefficients for the two methods were above 0.9 in all isocyanate compounds. Average recovery efficiencies for 2, 6-TDI, HDI, 2, 4-TDI and MDI in filter method were 92.4%, 102.6%, 87.3% and 101.0%, respectively. Those in impinger method were 106.6%, 106.7%, 99.0% and 103.6%, respectively. As a result, the recovery efficiency of impinger method was higher than those of filter method in analyzing isocyanate compounds. 3. The pooled coefficients of variations of the methods were slightly higher than expected. The overall accuracies of the methods were within $\pm 25%$ for each isocyanate compound. Since these results satisfy NIOSH criteria, the accuracy of the experiment is appropriate. 4. As seen above, impinger method is more efficient than filter method. But, there are many disadvantages in impinger method. Therefore, solid sorbent such as a glass fiber filter must be developed in order to have the high efficiency not less than that of impinger method in the future.

  • PDF

시료채취 방법에 따른 작업 공정별 Toluene diisocyanates 포집농도 비교 (Comparison of Toluene Diisocyanate Concentrations Collected with Different Sampling Methods by Work Process)

  • 김성호;원종욱;김치년;정우진;노재훈
    • 한국산업보건학회지
    • /
    • 제23권2호
    • /
    • pp.95-102
    • /
    • 2013
  • Objectives: The aim of this study is to present an appropriate sampling method for individual exposure assessment based on a comparison of toluene diisocyanate (TDI) concentrations collected through different sampling methods by work process type. Methods: Two plants handling TDIs in the Incheon area were selected. The samplings were taken during respective processes of spray painting, drying, grinding, and foaming, in which the production of TDIs took on different forms. For the sampling methods for airborne TDIs, open-face cassette holder, modified 2-piece cassette holder, and impinger were used, and the sampling was performed simultaneously at the same locations. Results: The comparison of TDI collection concentrations by each process depending on the sampling method showed high concentrations in the order of the impinger, modified 2-piece cassette holder, and open-face cassette holder for spray painting and foaming. In all processes with the exception of drying, TDI collection concentrations were higher for sampling done with the modified 2-piece cassette holder than with the open-face cassette holder. Conclusions: Based on these results, the modified 2-piece cassette holder was found to be a more appropriate sampling method than the open-face cassette holder when taking individual samples of TDIs from spray painting, grinding, and foaming processes. In particular, for individual exposure assessment of the spray painting process, which features comparatively high collection concentrations compared to the other processes, the use of a modified 2-piece cassette holder is considered appropriate.

파주생태습지의 부착규조를 이용한 생물학적 수질평가 (The biological assessment of water quality using DAIpo and TDI of Paju Ecological wetland)

  • 김용진;김헌년;이옥민
    • 환경영향평가
    • /
    • 제21권2호
    • /
    • pp.229-238
    • /
    • 2012
  • This research was to examine the physiochemical factors and the attached diatoms of ecological wetland in Paju from August 2010 to May 2011. As a result of physicohemical water quality assessment, the water temperature did not fluctuate much due to ample riparian vegetation and aquatic plants growing at the site. Due to the effect of Han River Estuary, site 4, 5 and 6 had high electricity conductivity. The BOD concentration was high at site 2, 3, and 4 caused by decrease in water quantity and inflow of polluted water. At all sites, T-N and T-P concentrations ranged from eutrophic to hypertrophic status. At the downstream, the T-N and T-P concentrations decreased by inhabiting aquatic plant. Total of 98 taxa of attached diatoms were found. As for dominant taxa, Achnanthes convergens, A. minutissima, Gomphonema gracile, G. parvulum, Melosira varians, Navicula seminulum, N. minima, N. pseudolanceolata, Nitzschia amphibia, N. palea, Surirella minuta and Synedra ulna var. fragilariodes appeared. The result of biological assessment of water quality rated the sites B(suboptimal)~D(poor) during seasons of low water temperature, Fall and Winter, with DAIpo ranging 24.1~68.2 and TDI of 48.4~85.6. During Spring and Summer, all sites were rated D(poor) with DAIpo lower than or equal to 40, and TDI above or equal to 70. The biological assessment of water quality at the research site showed inferior TDI result compared to that of DAIpo.

Isocyanate에 의한 직업성 천식환자에서 임상양상과 Isocyanate 특이 IgE 항체에 관한 연구 (Isocyanate-Induced Occupational Asthma: Immunologic and Challenge Studies)

  • 서정은;박해심;김성진;유남수;조동일;김재원;경난호
    • Tuberculosis and Respiratory Diseases
    • /
    • 제39권6호
    • /
    • pp.490-501
    • /
    • 1992
  • TDI 기관지 유발검사상 TDI-천식으로 확진된 환자 22명을 대상으로 이들의 임상적 특징에 관한 고찰과 함께 메타콜린 기관지유발검사 및 TDI-, MDI-, HDI-HSA conjugate에 대한 특이 IgE 항체를 측정하여 다음과 같은 결과를 얻었다. 1) TDI 기관지유발검사상에서는 조기 반응형이 11예(50%), 후기단독 반응형이 6예(27%), 그리고 이중 반응형이 5예(23%)였다. 2) 메타콜린 기관지유발검사상 19예(86.4%)가 양성반응을, 3예(13.6%)가 음성반응을 보였으며, 이들 음성반응자들은 TDI 기관지유발검사 24시간후에 다시 시행한 메타콜린 기관지유발검사에서는 기도과민성을 나타내었다. 3) Isocyanate에 대한 특이 IgE 항체의 측정 결과 TDI-HSA에 대해서는 12예(54.5%), MDI-HSA에 대해서는 7예(31.8%), 그리고 HDI-HSA conjugate에 대해서는 9예(40.9%)가 양성반응을 보였으며, 특이 IgE의 양성률은 잠복기, 아토피유무 및 흡연상태와는 상관관계가 없었다. 4) 추적검사가 가능했던 12예에서 기도과민증의 호전을 보였던 예는 8예였는데, 이 중 7예는 isocyanate 노출에의 회피가 가능했던 경우였고 1예는 계속적으로 노출되어 있었음에도 불구하고 호전된 경우였으며, 악화되었던 4예 중 2예는 계속적으로 노출되어 있었던 경우, 그리고 2예는 회피에도 불구하고 악화을 보인 경우였다. 이상의 결과로 isocyanate에 의한 직업성 천식 환자의 59.1%에서 IgE 매개에 의한 기관지 수축반응이 의심되었으며, 메타콜린 기관지유발검사상 음성반응을 보인다고 하더라도 병력상 isocyanate에 의한 직업성 천식이 의심되면 isocyanate-기관지유발검사를 시행하고 그 이후 지도 과민증의 변화를 관찰하는 것이 진단에 유용할 것으로 여겨진다.

  • PDF

천연염색에 관한 연구(2) - 개질 면에 대한 황벽염색 - (A Study on Natural Dyeing(2) - Dyeing of modified cotton fabric with Amur cork tree -)

  • 김혜인;박수민
    • 한국염색가공학회지
    • /
    • 제13권3호
    • /
    • pp.172-179
    • /
    • 2001
  • In order to improve dye uptime and wash fastness on dyeing of cotton fabrics with Amur cork tree, twitter ionic groups, acid groups, hydrophobic groups or cross linkage were introduced into cotton fabrics. Results obtained were as follows, 1 The optimum modification of cotton fabrics was carbosy methylation in the water solution containing 15% sodium chloroacetate and 15% sodium hydroxide and then introducing hydrophobic groups by treating in the solution containing $30m\ell$ DMSO and $3m\ell$ 2,4-TDI 2. Numbers of carbon, diisocyanate group than monoisocyanate group and aromatic compound than aliphatic compound in introduced hydrophobic groups were effective. 3. The dye uptake and wash fastness wore enhanced significantly by treating only with 2,4-TDI. 4. The wash fastness seems to correlate to the degree of swelling of the fabric during washing and also depend on the Interaction between dyes and acid groups as well as hydrophobic groups.

  • PDF

폴리아마이드제 등 조리기구 중 모노머의 이행에 관한 연구 (A Study on Migration of Monomers from Kitchen Utensils Including PA, PU, ABS, and Acrylic Resin Plastics)

  • 최재천;박세종;박건우;민혜경;양지영;김미혜
    • 한국식품위생안전성학회지
    • /
    • 제30권1호
    • /
    • pp.81-86
    • /
    • 2015
  • 국내 유통 중인 총 321건의 폴리아미드, 폴리우레탄, ABS, 아크릴 수지 재질 식품용 기구 중 이행우려가 있는 모노머인 4,4'-메틸렌디아닐린, 2,4-톨루엔디아민, 아닐린, 아크릴로니트릴 및 메틸메타크릴레이트에 대하여 이행량을 조사하고 안전성 평가를 실시하였다. 83건의 폴리아미드, ABS 및 아크릴 수지 재질 식품용 기구 검체에서 현행 식품용 기구 및 용기 포장 공전상의 용출규격 이하인 4,4'-메틸렌디아닐린, 2,4-톨루엔디아민, 아크릴로니트릴 및 메틸메타크릴레이트가 이행되었다. 이행량 결과를 토대로 안전성 평가 시나리오에 적용하여 4,4'-메틸렌디아닐린, 2,4-톨루엔디아민, 아크릴로니트릴 및 메틸메타크릴레이트의 EDI를 산출한 후 TDI와 비교하여 위해도를 평가하였다. EDI는 폴리아미드 재질 기구의 4,4'-메틸렌디아닐린과 2,4-톨루엔디아민의 경우 각각 $2.39{\times}10^{-9}$, 및 $1.20{\times}10^{-9}mg/kg\;bw/day$, ABS 재질 기구의 아크릴로니트릴의 경우 $4.32{\times}10^{-9}mg/kg\;bw/day$, 아크릴 수지 재질 기구 메틸메타크릴레이트의 경우 $2.27{\times}10^{-7}mg/kg\;bw/day$이었다. ABS 재질 기구 이행 아크릴로니트릴의 위해도는 RfD 대비 $4.32{\times}10^{-4}%$ 수준이었고, 아크릴 수지 재질 기구 이행 메틸메타크릴레이트의 위해도는 TDI 대비 $1.89{\times}10^{-5}%$ 수준이었다. 결론적으로 검토된 평가 항목들의 위해도는 TDI 대비 $4.32{\times}10^{-4}%$$1.89{\times}10^{-5}%$에 불과한 것으로 조사되어 안전한 수준인 것으로 사료되었다. 이러한 결과들은 앞으로 기구 및 용기 포장의 안전관리를 위한 과학적인 근거자료로 이용될 수 있을 것으로 판단된다.

나프탈렌기를 갖는 새로운 액정폴리우레탄의 합성 및 특성 (Synthesis and Characterization of New Thermotropic Liquid Crystalline Polyurethanes with Naphthalene Moiety)

  • 이종백;이광현
    • Elastomers and Composites
    • /
    • 제40권1호
    • /
    • pp.37-44
    • /
    • 2005
  • 새로운 형태의 액정성 폴리우레탄을 2,6-bis(${\omega}$-hydroxyalkoxy)naphthalene (BHNm; m= 5, 6, 8, 11)과 2,5-tolylene diisocyanate 또는 1,4-phenylene diisocyanate의 중부가 반응에 의해 합성하였다. 폴리우레탄의 고유 점성도는 0.28-0.43 dL/g 였다. 열적 성질은 DSC 및 편광현미경에 의해 측정되었다. 단량체 BHNm과 메틸치환기를 가진 2,5-tolylene diisocyanate에 의해 합성된 폴리우레탄은 모두 단방성 액정성을 나타내었다. 그러나 BHNm와 1,4-phenylene diisocyanate를 합성한 폴리우레탄에서는 DSC와 편광현미경으로 조사 결과 전혀 액정성을 나타내지 않았다.

금호강의 부착규조 군집분석과 수질 변화비교 (Analysis of the Epilithic Diatom Community and Comparison of Water Quality in the Kumho River)

  • 최재신;채현식;김한순
    • 생태와환경
    • /
    • 제48권2호
    • /
    • pp.115-121
    • /
    • 2015
  • 부착규조 군집의 유기오탁지수 (DAIpo)에 의해 금호강의 수질을 평가하고 이전 수질과 비교하기 위하여 금호강에 5개의 정점을 선정하고, 2010년 4월부터 2012년 9월까지 매년 4월과 9월 총 6회에 걸쳐 채집조사를 실시하였다. 116종이 출현하였으며 2목, 3아목, 7과, 26속, 103종, 13변종으로 분류되었다. Achnanthes minutissima 등 10종이 우점하였고 하류로 갈수록 호오탁성종이 늘어났다. 부착규조 군집과 이화학적 요인과의 상관관계 (r)는 -0.62~0.71의 범위로 상관성의 범위가 넓었다. 두 규조지수 (DAIpo, TDI)가 총질소와 높은 상관성 (r=0.57, r=0.67)을 나타내어 총질소가 부착규조 군집에 영향을 미치는 것으로 나타났다. 상관분석 결과, DAIpo와 TDI는 상관계수 0.62로 나타났다. 평균DAIpo는 37.24~74.98이었고 상류에서 하류로 갈수록 수치가 낮아졌다. 금호강의 정점별 평균수질은 정점 1은 ${\beta}$-빈부수성수역, 정점 2는 ${\alpha}$-빈부수성수역, 정점 3는 ${\beta}$-중부수성수역으로 이전의 수질과 변화가 거의 없었다. 그러나 정점 4와 5는 ${\alpha}$-중부수성수역과 강부수성수역으로 수질오염이 심하였으나, 이번 조사에서 ${\beta}$-중부수성수역으로 나타나 하류의 수질이 상당히 개선된 것으로 나타났다. DAIpo를 이용한 종합적 수질평가인 RPId는 52.27로 금호강은 중간 정도의 수질로 평가되었다.