• Journal of Preventive Medicine and Public Health
• /
• v.2 no.1
• /
• pp.61-76
• /
• 1969

A review has been made of mortality trends in Korea from 1958 to 1967 analyzing the data by sex, age and cause of death. The crude death rates and age specific death rates were estimated by the model of N. Keyfitz life table which had been developed by the data of the 1960's national census. The cause specific death rates shown in this article are based on the following: all deaths occurring in the death-registration are expressed as a numberator, while the denominator was estimated from the regular national census data by interpolation method. It is estimated that only an average of about 40% of deaths which occurred during a year were registered during 1958 to 1967. The validity and the reliability of the diagnosis of causes of death seem to be extremely poor in this country. Therefore the cause specific death rates in this article are aimed to reveal trends of causes of registered death ana not for the actual level of death rates. For 10 years very interesing mortality trends were observed : 1. The trend in the crude death rates was downward slowly. 2. The estimated death rate for the infant in 1960 was still high up to 100 per 1,000. 3. The rates for mortality attributed to such infectious diseases as pneumonia, bronchitis, gastroenteritis and measles decreased an average 40-60%. 4. The death rates for over-all tuberculosis decreased only 9.8%. 90% of the decrease was contributed by those in the less-than-15 year age group. 5. The death rates for chronic diseases, such as vascular diseases affecting the central nervous system, malignant neoplasm, major heart diseases and all accidents rose about 40-60%. 6. The rank order of the 10 leading causes of death showed large changes over the years, except for pneumonia and tuberculosis which occupyed 1st and 2nd places respectively. Vascular diseases affecting the central nervous system moved from 5th to 3rd place and malignant neoplasm from 6th to 4th place, The major heart diseases moved from 10th to 6th place and all accidents from 10th to 7th place. On tile other hand, gastroenteritis moved from 3rd to 5th place and influenja from 4th to 8th place.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.279-279
• /
• 2017

In Korea, the single span unheated plastic house cultivated crops from autumn to spring of the following year, removed the plastic film and frame, cultivated rice, set up a plastic house again and cultivated crops. The crops in the greenhouse are utilized mainly for the production of leaf vegetables such as lettuce, leek, and fruit vegetables such as strawberry, watermelon, oriental melon, etc. and raising high income. Because, the production of these crops has characteristics requiring a lot of labor and it is difficult to produce horticultural crops at unheated plastic houses as the rural population ages. Therefore, we conducted a test to develop a crop planting system to cultivate crops in single span unheated plastic houses, although the utilization of labor is less than that of horticultural crops. The prior cropping cultivated three cultivars of sweet potatoes early, the second produced cultivated sweet potatoes, corn and soybeans. In the cultivation of the previous cropping, the sweet potatoes were harvested on the 113th day after planting on March 30th, the yield was 822 kg/10a for Pungwonmi, 1,377 kg/10a for Jinhongmi, 1,483 kg/10a for the Dahomi. Because of differences, the yield of Pungwonmi cultivar was less than that other cultivars and the yield of open field cultivations, we will expect further research. In the cultivation of the succeeding crops sweet potatoes were planted on July 27 and harvested 110 days later and investigated. The product yield of Pungwonmi cultivar was 1,024 kg/10a, and the Jinhongmi, Dahomi cultivars were not at economic level for sale and were necessary to review. In succeeding-crops, corn tested the Ilmichal cultivar, seeded on 27th July, harvested on October 11th. The day of silking was 45 days after sowing, the yield was 1,156 kg/10a, the goods rate was 100% level. The beans in the succeeding cultivation crop were sowed on 27th July, the early maturing of the varieties coming to Hwangeumol and Saeol cultivar, on 17th October, the late maturing soybean Daewonkong cultivar were harvested on October 21st. The yield of early maturing two cultivars was 214 kg/10a, Daewonkong was 257 kg/10a, and 100 seeds weight which were more than the early maturing beans were also heavy. When calculating these incomes price-wise according to the harvest time, we were able to consider the income in the order of corn, sweet potato and soybean from the second term crop. Various studies such as varieties, mulching method, moisture management, control environment management, etc. are considered necessary to develop cropping systems with sweet potato and field crops in future unheated plastic house.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.17-25
• /
• 2022

The pintle injector has many advantages in the key characteristics of a liquid rocket engine, such as combustion stability, combustion efficiency, and wide range of comprehensive thrust control, design and manufacture, and test fired under supercritical conditions. The pintle injector is manufactured with a rectangular, single-row orifice for thrust control and production considerations. In order to verify the combustion performance of the pintle injector and its potential as a commercial injector, the combustion characteristics were analyzed by varying the TMR (Total Momentum Ratio) and BF (Blockage Factor). The result of the hot firing test showed that the heat flux increased as TMR increased, and it confirmed that the characteristic velocity efficiency was more affected by BF than TMR. Suppose a single-row pintle injector with efficiency characteristics insensitive to changes in TMR can achieve high efficiency at low fuel differential pressure conditions. In that case, the variable pintle injector's design flexibility can be increase.

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.7-11
• /
• 2024

Pump car is an equipment that transports concrete products as needed to the place where they are poured. In order to pour a large amount of concrete in a short period of time, using a pump car is the most efficient in terms of economic efficiency and quality control. However, recently, many casualties have occurred due to boom damage during concrete pouring, so this study suggests that improvements are needed in the equipment manufacturing stage, inspection standards for old equipment, and equipment rental system. The reason is that, as a result of the finite element analysis of the pump car, the significant stress acting at the second stage of the boom and the maximum stress at the top of the boom were found to be 895.39 MPa, and M.S. Since it was evaluated the lowest at 0.04, the need for reinforcement was recognized. And it was confirmed that the 2nd stage boom was the most stressful and vulnerable part of the 1st to 5th stage booms. Therefore, it is necessary to increase the thickness and rigidity of members at the design and manufacturing stage, and to reinforce the steel plates of currently used equipment. In addition, it is urgent to establish a system that makes non-destructive testing mandatory for all general construction machinery and holds inspection agencies responsible for missing boom defects during non-destructive testing and regular inspections.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.59-89
• /
• 2010

One of the key words that represent the culture and social phenomena in this 21st century is 'Digital Convergence'. Presently our society is going through the second evolving phase of the convergence, integration between industries. Integration between industries refers to the phenomenon of integrating various industrial areas such as broadcasting, communication, finance, automobile, and medical treatment as the range of IT utilization becomes extended. The telecommunication-broadcasting bundling is a typical example of integration between industries. This study analyzed the effect of the service features of the bundling on the customer's acceptance intention by applying the innovative technology product acceptance model, TAM, in the process of accepting the telecommunication-broadcasting bundling. This study suggests three independent variables, the 'low cost(discount)', 'service integrity', and 'selectability', which affect perceived usefulness, perceived ease of use, and perceived risk, and figures out the actual influence as follows. In conclusion, these results suggest that in order to accept and spread the telecommunication-broadcasting bundling, it is necessary to establish (1) the cost discounting strategy realize (price strategy), (2) the fee noticing system, payment system, call-service system, and systemic integration including installation and A/S system integration, and develop (service strategy), (3) the bundling or related options that can provide users with selectability (product strategy).

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.157-170
• /
• 1999

This study was conducted to investigate the effects of Scoria, Quartz porphyry and Oak charcoal powder feeding by 1% level of concentrate on the fattening cross bred bulls(5/8 Korean Native Cattle, 2/8 Charolais, 1/8 Brahman germ plasma) Feeding trial was conducted with 4 treatment groups which were T1(Full feeding of concentrate and roughage for 12 months), T2(T1 and Scoria addition), T3(T1 and Quartz porphyry addition) and T4(Oak charcoal addition) for 360 days, consisting of 32 heads whose initially weights were about 299.7kg. The results obtained are summarized as follows; 1. During the over-all period, average daily gains by T3, T4, T2 and T1 were 1.024, 0.987, 0.977kg and 0.964, respectively, without a significant difference by treatments. 2. Concentrate intakes per body weight and TDN intakes required per unit of kilogram gain were lower in addition agent groups than in control, and in all the treatments feed efficiency was higher at early stage for 360 fattening day than at end stage. 3. Carcass weight, dressing percent, back-fat thickness and loin eye muscle area by treatments were 330.9 to 348.4kg(average 340.3kg), 55.2~56.2(average 55.8%), 0.41~0.55(average 0.46cm)and 76.0~80.9$\textrm{cm}^2$(average 77.6$\textrm{cm}^2$), respectively, and were improved in addition agent groups than in control. 4. Meat quality grade is higher in addition agent groups than in control, and heads of 1st grade by treatments was 3, 2, 1 and none in T4, T2, T3 and T1, respectively. 5. Incidence heads of diseases by treatment were not apparently different, but diseases of digestive system was decreased in addition agent groups than in control. 6. The nitrate nitrogen content of fattening bull dung which collected in rectum were 0.082~0.089% (average 0.084%), and the content in addition agent groups was smaller than in controll. 7. Income was higher in order of T4, T3, T2, and T1 and incomes of treatment groups were grater than that of control group by 21.4 to 33.5 percent. According to the above results it may be concluded that fattening bulls may be required to feed no more than 1% of Scoria, Quartz porphyry and Oak charcoal powder based on the concentrate feeding level during the fattening period(12 to 24 month of age) to produce high quality meat and increase income.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.240-249
• /
• 2001

A high speed ultra-compact lens with a diffractive optical element (DOE) is designed, which can be applied to mobile communication devices such as IMT2000, PDA, notebook computer, etc. The designed hybrid lens has sufficiently high performance of less than f/2.2, compact size of 3.3 mm (1st surf. to image), and wide field angle of more than 30 deg. compared with the specifications of a single lens. By proper choice of the aspheric and DOE surface which has very large negative dispersion, we can correct chromatic and high order aberrations through the optimization technique. From Seidel third order aberration theory and Sweatt modeling, the initial data and surface configurations, that is, the combination condition of the DOE and the aspherical surface are obtained. However, due to the consideration of diffraction efficiency of a DOE, we can choose only four cases as the optimization input, and present the best solution after evaluating and comparing those four cases. On the other hand, we also report dramatic improvement in optical performance by inserting another refractive lens (so-called, field flattener), that keeps the refractive power of an original DOE lens and makes the petzval sum zero in the original DOE lens system. ystem.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.633-643
• /
• 2009

Objectives : This study is aimed to help the dental hygiene department students to improve their adaptive ability to the field work by letting them know the performing levels required of the job world, by renovating the knowledge-centered curriculum, and by finding out the core competencies needed for successfully performing their duties and tasks in the work field. Methods : The survey tool was recomposed through the examination of the preceeding studies on basic vocational competencies and skills, and the survey has been done to 200 dentists in Seoul and Gyunggi provice. Results : 1. As for the job-getting routs, 35.1% of them finds their jobs through the job portal sites, and 21.3% through the recommendation by professors. So we can see the meaningful difference in the employment ways. 2. Dental hygiene clinics think that the purpose of their cooperation with the colleges is mainly to secure human resources by requiring the colleges to give field-centered education the colleges through. 3. The clinics for dental hygienic students' field learning have a great power for hiring the students. So it is necessary to set up a good management system of the clinics for dental hygienic students' field learning in order to reinforce the students' competitive power in getting jobs. 4. The priorities in basic working abilities needed for the task performance are in the order of vocational responsibility, self-managing & developing ability, interpersonal skill, and problem solving ability. 5. The core competencies required of those who graduate from dental hygiene school show the following scores by Likert measurement; good personality and vocational consciousness 2.16(${\pm}.677$), understanding power of major-related knowledge 2.19(${\pm}.723$), field adapting ability 2.31(${\pm}.748$), get-along-with ability 2.32(${\pm}.799$), interpersonal skill 2.42(${\pm}.768$), and self-development ability such as getting certificates 2.43(${\pm}.729$). Among the core competencies, the only meaningful factor which influences on their satisfaction measurement has been identified as the professional ability related to the major. Conclusions : The results suggest that the knowledge and skill related to the major are core competencies of able human resources and closely related with the professionality of the job, and so they are very important. However, job basic abilities are also proved to be important, which reinforce the students' activeness, self-regulation, and creativeness, and help them to pursue their lasting growth in their abilities.

• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.280-288
• /
• 2008

Purpose: To identify the inter-fractional shift pattern and to assess an adequate treatment margin in the radiotherapy of a liver tumor using mega-voltage computed tomography (MVCT) of a tomotherapy unit. Materials and Methods: Twenty-six patients were treated for liver tumors by tomotherapy from April 2006 to August 2007. The MVCT images of each patient were analyzed from the $1^{st}$ to the $10^{th}$ fraction for the assessment of the daily liver shift by four groups based on Couinard's proposal. Daily setup errors were corrected by bony landmarks as a prerequisite. Subsequently, the anterior-, posterior-, right-, and left shifts of the liver edges were measured by maximum linear discrepancies between the kilo-voltage computed tomography (KVCT) image and MVCT image. All data were set in the 2-dimensional right angle coordinate system of the transverse section of each patient's body. Results: The liver boundary shift had different patterns for each group. In group II (segment 2, 3, and 4), the anterior mean shift was $2.80{\pm}1.73\;mm$ outwards, while the left mean shift was $2.23{\pm}1.37\;mm$ inwards. In group IV (segment 7 and 8), the anterior-, posterior-, right-, and left mean shifts were $0.15{\pm}3.93\;mm$ inwards, $3.15{\pm}6.58\;mm$ inwards, $0.60{\pm}3.58\;mm$ inwards, and $4.50{\pm}5.35\;mm$ inwards, respectively. The reduced volume in group II after MVCT reassessment might be a consequence of stomach toxicity. Conclusion: Inter-fractional liver shifts of each group based on Couinard's proposal were somewhat systematic despite certain variations observed in each patient. The geometrical deformation of the liver by respiratory movement can cause shrinkage in the left margins of liver. We recommend a more sophisticated approach in free-breathing mode when irradiating the left lobe of liver in order to avoid stomach toxicity.

• Women's Health Nursing
• /
• v.6 no.2
• /
• pp.234-257
• /
• 2000

At present in the medical care, the study and effort for producing health service to consider efficiency, effectiveness, and quality are urgently called for because of the difficulty in the keen competition according to the inter- nationalization and opening, the operation in the medical institution service testing system, the change in the medical policy of KDRGs, and the lack of the health care cost increasing rate. As an alternative, the case management for the new management system is introduced in the U.S., and the Critical Pathway that is the method designing the contents of activity and its result has been developed and applied in order to anticipate and manage the patient-outcome for the realization of the cost-effective case-management. Thus, this study intended to analyze the effectiveness to obtain by developing the Critical Pathway presented as the method to improve the quality-betterment and cost effectiveness through the continuous and consistent patient management for the hysterectomy patient and applying it to the real practice. As a study method, this author formed a conceptual framework through considering five Critical Pathway used in the current U.S. and three Critical Pathway presented in the literature to develop the Critical Pathway for the hysterectomy patient, and made out the preliminary Critical Pathway through reviewing the old chart. This author made the verified the validity of the expert group about the developed Critical Pathway, and to confirm the possibility of practice application, completed and settled the final Critical Pathway after using the Critical Pathway to the hysterectomy patient from March 1st to 15th, 1997. Finally, to analyze the application-effect of the developed Critical Pathway, this author offered health care service applying the Critical Pathway to the hysterectomy patient from April 15th to August 31th, 1997. The guide for the Critical Pathway was carried out in advance by outpatient setting nurse for outpatient setting visit before the operation, and after hospitalization the primary nurse monitored the execution degree on the every duty. After discharge this author surveyed the complication through phone visiting, and one month after discharge surveyed the patient's reaction about the offered service when outpatient setting visit and analyzed the result. The source for health care cost was obtained by the statistics about the hospital charge which was offered by the General Business Department. The results were as follows. 1. It was decided that the vertical line of the Critical Pathway was made up of eight items such as monitoring/assessment, treatment, line/drains, activity, medication, lab test, diet, patient teaching, and the horizontal line of the Critical Pathway was made up of from hospitalization to discharge. 2. After the analysis of service contents through reviewing the old chart, it was decided that the horizontal line of the preliminary Critical Pathway was made up of from hopitalization to fourth postoperative day, and the vertical line of it was divided into eight items which were the contents to occur with the time frame of the horizontal line. 3. After the verifying the validity of the expert group about the preliminary Critical Pathway, the horizontal line was amended from hopitalization to third postoperative day, and taking their consensus, some contents of the horizontal line was amended and deleted. 4. From March 1st to 15th, 1997, to confirm the clinical suitability, this author offered eight hysterectomy patients the medical service through the Critical Pathway. The result was that three of them could be discharged at the expected discharge day, and the others later than that day. Supplementing the preliminary Critical Pathway through analyzing the cause of that delay- case, this author developed the final Critical Pathway. 5. There were no significant differences between the experimental and the control group in the incidence of complication(P > 0.05). 6. The 92.4% of experimental group was satisfied with the Critical Pathway service. 7. The length of hospital stay of the experimental group offered with the Critical Pathway service was 4.6 days and there was a significant difference that it was 1.3 days shorter than that of the control group(t=-29.514, P=0.000). 8. There wsa a significant difference that the mean medical charge per one patient of the experimental group offered the Critical Pathway service was cheaper \124,150 than that of the control group(t=-9.826, P=0.000). 9. The result that the author assumed and analyzed hospital income with the rate of turning bed was assumed that the increase of hospital income was \63,245,072 for that study, and the income increase was expected with \68,704,864 for a year. The result that this author applied the Critical Pathway to the hysterectomy patient have no differences in the incidence of complication, high satisfaction with that service, and the length of hospital stay decreased in the experimental group, and the mean hospital charge per one patient decreased, but hospital income increased. Suggestions for further study and nursing practice are as follows. 1. The study to apply the Critical Pathway for a year, verify the validity, and measure the effect repeatedly is needed. 2. To apply and manage the Critical Pathway effectively, the study to computerize it is needed. 3. The study to develop hospital-based Critical Pathway about other diseases or procedure, and measure the effect is needed.