• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.80-80
• /
• 2000

Surface acoustic wave (SAW) devices have become more important as mobile telecommunication systems need h호-frrequency, low-loss, and down-sized components. Higher-frequency SAW divices can be more sasily realized by developing new h호-SAW-velocity materials. The ZnO/diamond/Si multilasyer structure is one of the most promising material components for GHz-band SAW filters because of its SAW velocity above 10,000 m/sec. Silicon carbide is also a potential candidate material for high frequency, high power and radiation resistive electronic devices due to its superior mechanical, thermal and electronic properties. However, high price of commercialized 6- or 4H-SiC single crystalline wafer is an obstacle to apply SiC to high frequency SAW devices. In this study, single crystalline 3C-SiC thin films were grown on Si (100) by MOCVD using bis-trimethylsilymethane (BTMSM, C7H20Si7) organosilicon precursor. The 3C-SiC film properties were investigated using SEM, TEM, and high resolution XRD. The FWHM of 3C-SiC (200) peak was obtained 0.37 degree. To investigate the SAW propagation characteristics of the 3C-SiC films, SAW filters were fabricated using interdigital transducer electrodes on the top of ZnO/3C-SiC/Si(100), which were used to excite surface acoustic waves. SAW velocities were calculated from the frequency-response measurements of SAW filters. A generalized SAW mode. The hard 3C-SiC thin films stiffened Si substrate so that the velocities of fundamental and the 1st mode increased up to 5,100 m/s and 9,140 m/s, respectively.

• Journal of Veterinary Clinics
• /
• v.34 no.2
• /
• pp.126-131
• /
• 2017

This study investigated the incidence rate of umbilical hernia (UH) in pig farms and examined the effect of using them as breeding pigs on reproductive traits. The occurrence of UH ranged from 0.1% to 3.0% in pig farms investigated. UH pigs were found in almost all farms except for a single farm in Jeju Island. Spontaneously occurring UH pigs were selected and used for cross breeding tests. UH-related crosses and their progeny showed significant (P < 0.05) differences in gestation period, the numbers of piglets born and alive, and body weights at birth and $21^{st}$ day comparing to those of the control population. UH-related crosses showed longer gestation period, reduced numbers of piglets, and lighter body weights than those from the control population. Interestingly, reduced number of piglets was about one fourth, suggesting that UH inheritance might play a critical role as a lethal gene during embryogenesis. In addition, UH incidence rate in UH-related crosses was significantly (P < 0.05) higher than that in the control except for UH-cross3. However, in the progeny of control cross, a pig also had UH appearance, indicating that porcine UH might be inherited in recessive inheritance mode. Taken together, the results of this study indicate that UH is one of recessively inherited genetic defect that occurs at ordinary times in pig farms, suggesting that the use of UH animals as sire and/or dam may lead to economic losses due to increased gestation period, reduced numbers of piglets born and alive, and lower growth rates after birth of pigs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3834-3857
• /
• 2021

The design of cluster-based routing protocols is necessary for Wireless Sensor Networks (WSN). But, due to the lack of features, the traditional methods face issues, especially on unbalanced energy consumption of routing protocol. This work focuses on enhancing the security and energy efficiency of the system by proposing Energy Efficient Based Secure Routing Protocol (EESRP) which integrates trust management, optimization algorithm and key management. Initially, the locations of the deployed nodes are calculated along with their trust values. Here, packet transfer is maintained securely by compiling a Digital Signature Algorithm (DSA) and Elliptic Curve Cryptography (ECC) approach. Finally, trust, key, location and energy parameters are incorporated in Particle Swarm Optimization (PSO) and meta-heuristic based Harmony Search (HS) method to find the secure shortest path. Our results show that the energy consumption of the proposed approach is 1.06mJ during the transmission mode, and 8.69 mJ during the receive mode which is lower than the existing approaches. The average throughput and the average PDR for the attacks are also high with 72 and 62.5 respectively. The significance of the research is its ability to improve the performance metrics of existing work by combining the advantages of different approaches. After simulating the model, the results have been validated with conventional methods with respect to the number of live nodes, energy efficiency, network lifetime, packet loss rate, scalability, and energy consumption of routing protocol.

• Journal of Korean Public Health Nursing
• /
• v.11 no.1
• /
• pp.128-137
• /
• 1997

This study was designed to get basic data about AIDS educational program development of Adults. The objective of this study was to identify the level of AIDS relatied Knowledge and Attitude of Adults. The subject for this study consisted of 327 men and women who were living in chonbuk province. Data was colledted by self-reporting questionaire consist of 61 items during the period from 1st. December to 20th, December, 1996. The results were us follow ; 1. AIDS related knowledge ranged from 6 to 32(M;23.13, SD:5.86). Percentage of correctly answered respondents to each catagories ; Risk factors : $\cdot$ Infection through needle : $93.9\%$ $\cdot$ Infection through blood transfusion : $92.4\%$ $\cdot$ Infection of multi-sexuals : $90.5\%$ $\cdot$ Infection of hemophillias patients : $39.4\%$ $\cdot$ Infection of hemosexuals : $23.2\%$ Mode of transmission : $\cdot$ Infection through pubic rest room : $56.3\%$ $\cdot$ Infection through personal materials: $65.1\%$ $\cdot$ Infection through food: $67.6\%$ 2. The relationship between AIDS related knowledge and each of those general characteristics, AIDS related knowledge showed significant difference with age(p=0.0293), marital status(p=0.003). sexual experience(p=0.020) and used contraceptive(p=0.0l5). 3. Among the items regarding attitudes, what has highed level was preventional education of National policy about AIDS$(94.5\%)$. What has lowest level of Attitides was that AIDS carrier could go to school with noncarrier children$(39.1\%)$. 4. The relationship between attitude of AIDS and each of these general characteristics over 30 age group, married women, sexual experience and used contraceptive were higher than others.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.102-107
• /
• 2003

This study puts focus on the optimization of growth temperature of CIGS absorber layer which affects severely the performance of solar cells. The CIGS absorber layers were prepared by three-stage co-evaporation of metal elements in the order of In-Ga-Se. The effect of the growth temperature of 1st stage was found not to be so important, and 350$^{\circ}C$ to be the lowest optimum temperature. In the case of growth temperature at 2nd/3rd stage, the optimum temperature was revealed to be 550$^{\circ}C$. The XRD results of CIGS films showed a strong (112) preferred orientation and the Raman spectra of CIGS films showed only the Al mode peak at 173cm$\^$-1/. Scanning electron microscopy results revealed very small grains at 2nd/3rd stage growth temperature of 480$^{\circ}C$. At higher temperatures, the grain size increased together with a reduction in the number of the voids. The optimization of experimental parameters above mentioned, through the repeated fabrication and characterization of unit layers and devices, led to the highest conversion efficiency of 15.4% from CIGS-based thin film solar cell with a structure of Al/ZnO/CdS/CIGS/Mo/glass.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.133-140
• /
• 2019

The effects of thermal cycle conditions on the bonding strength and crack propagation behaviors in electroplated Cr/electroplated Ni-P coatings were systematically evaluated. 1^st heat treatment was performed at 500℃ for 3 hours after electroplating Ni-P, and then, 2^nd heat treatment was performed at 750℃ for 6 hours after electroplating Cr. The measured bonding strength by ASTM C633 were around 25.6 MPa before thermal cycling, while it increased to 47.6 MPa, after 1,000 cycles. Increasing thermal cycles led to dominant fail mode with cohesive failure inside adhesive, which seemed to be closely related to the increasing bonding strength possibly not only due to higher Cr surface roughness, but also to penetrated channeling crack density. Also, increasing density of penetrated channeling cracks in electroplating Cr layer led to slightly stronger bonding strength due to mechanical interlocking effects of adhesive inside channeling cracks.

• Journal of Environmental Science International
• /
• v.15 no.7
• /
• pp.669-676
• /
• 2006

PAHs are major pollutants that are widely distributed in soil and groundwater environment, so that may be regarded as carcinogens. We investigated the degradation kinetics of PAH in aqueous solution when low pressure UV energy and ultrasonic irradiation were applied. Phenanthrene and pyrene were used as model compounds. The degrees of degradation of these compounds with time were analyzed with a GC/MSD (SIM-mode). UV photolysis experiments showed that phenanthrene was reduced by 90 -67% at initial concentrations of 1 ppm to 8ppm whilst it decreased to 50% at 10 ppm. Under the same conditions pyrene was degraded up to about 75% at lower initial concentrations but the reduction efficiency dropped to a level of 34 to 29% at the higher concentrations above 8 ppm. The reaction orders for phenanthrene and pyrene were found to be zero-th and ca. -0.4th order, respectively, thus implying that the reported assumption of pseudo 1st order reaction for some PAHs would be no longer valid. PAH degradation was roughly proportional to the intensity of UV (number of lamps), exhibiting maximum 92.5% of the degradation efficiency. The solution pH was lowered to 4.4 from 6.4 during the experiments partially because the carbons decomposed by the energy reacted with oxygen radicals to produce carbon dioxides. Ultrasonic irradiation on phenanthrene solutions gave relatively poor results which matched to 50 to 70% of degradation efficiency even at 2 ppm of initial concentration. Phenanthrene was found to be degraded more efficiently than pyrene for the two energy sources. Ultrasound also followed the same reaction kinetics as UV energy on PAH degradation.

• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.247-252
• /
• 2006

For the spring ephemeral and myrmecochorous perennia, Corydalis filistipes Nakai (Fumariaceae), rare and narrow endemic to Ullung Island in Korea, genetic diversity and structure of 4 subpopulations of the species were investigated with allozyme markers. Levels of genetic diversity (A=1.73, $P_{95%}$=61..2%, Ho=0.201, He=0.167) were relatively lower than those of other endemic species with widespread distribution range, but considerably higher than other endemic species with similar life history traits isolated in island. The moderate level of genetic diversity within subpopulations in C. filistipes is characteristic of the species with predominantly outcrossing, myrmecochorous seed dispersal by dual function of the elaisome and mode of sexual and asexual reproduction by the cleistogamy. The analysis of fixation indices showed an overall excess of heterozygotes (mean $F_{IS}=-0.1889,\;F_{IT}=-0.1226$) relative to H-W expectations. About 5.6% of the total genetic variation was found among subpopulations ($F_{ST}$=0.0557). The strategies of reasonable conservation and management, and the maintenance mechanism of genetic diversity of Corydalis filistipes Nakai, endemic plant species in Korea were discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.27-37
• /
• 1983

A method of dynamic analysis is developed for torsional free vibrations of elliptical-box girder type or stiffening truss system suspension bridge. In this study, the method based on a finite element technique using a digital computer, is illustrated by two numerical examples, the Namhae Bridge which is located in Kyungsang nam-do opened on June, 1973, and the Mt. Chunma Bridge is simple span pedestrian's suspension bridge with lateral bracing system in Mt. Chunma, Kyungki-do, are used. In general, dynamic modes of complex suspension bridges are three-dimensional in form, i.e., coupling between vertical and torsional motions. However, introduced that amplitudes of oscillation are infinitesimal for coincidence with the purpose of it's use, thereupon, the torsional vibration analyses are treated without coupling terms. A sufficient number of natural frequencies and mode shapes for torsional free vibration are presented in this paper. In the case of Mt. Chunma Bridge, the natural frequencies and periods are computed with and without reinforcement, respectively, and compared their discrepancies. The influence of the auxiliary reinforcing cables is prevailing in the first few modes, namely, 1st and 2nd in symmetric and 1st, 2nd and 3rd in antisymmetric vibration, and conspicuous in the symmetric compared with the antisymmetric motion, but in the higher modes, this kind of simple accessory elucidates rether converse effects. In the Namhae Bridge, the results are compared with the Manual's obtained by wind tunnel test. It reveals commendable agreement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.