• Journal of Korean Association for Spatial Structures
• /
• v.14 no.1
• /
• pp.77-84
• /
• 2014

Simple 3, 10, and 30-story buildings with a nonstructural element which is located at roof or near the middle of the building height are selected. Based on 2009 Korean Building Code, the seismic design force applied at the nonstructural element is evaluated. Response spectrum analysis is conducted with the design response acceleration spectrum of 2009 Korean Building Code and the analytical response is compared with the seismic design force from the Code. Furthermore, an artificial earthquake based on Korean design response acceleration spectrum and the 50% intensity of El Centro earthquake, which can be considered as the maximum future earthquake possibly occurring in Korea, are selected to conduct time history analysis. When the period of the nonstructural element is shorter than 0.06 second or longer than that of the 1st period of each building, the Code equations of seismic design force for nonstructural element seems to be appropriate. However, the period of the nonstructural element is close to the one of the building's higher mode periods including the 1st period, seismic force of the nonstructural element might exceed the Code specified seismic design force.

• Composites Research
• /
• v.16 no.5
• /
• pp.45-53
• /
• 2003

The experimental and numerical investigations on the failure characteristics of the secondary bonded composite single-lap joints were performed. The initiations and growths of cracks were observed using CCD camera and acoustic emission sensor during the tension tests of the joint specimens. The structural behaviors of the specimens were predicted by the geometric nonlinear two-dimensional finite element analysis. The three types of observed initial cracks were included in each finite element models and the strain energy release rates of each specimen models were calculated by VCCT(Virtual Crack Closure Technique) technique. The tension tests showed that the initial cracks occurred in the 60∼90% of final failure loads and the major failure modes of the specimens were adhesive failure and the delamination between the 1st and 2nd ply of laminate. The specimens with the thicker bondline had earlier crack initiation loads but higher crack propagation resistance and eventually better loading capability. The delaminations were mostly observed in the thicker bondline specimens. The mode I values of calculated strain energy release rates were higher than the mode II values in the all specimen models considering the three types of initial cracks. The mode I and total strain energy release rates were calculated as higher values in the order of initial crack in the edge interface, comer interface and delamination between the plies of laminate.

• Journal of Korea Water Resources Association
• /
• v.39 no.11 s.172
• /
• pp.961-968
• /
• 2006

Since a small harbor is often located near surf zone areas which have great influences of sediment transport, there is a great possibility that the sediment will be deposited inside of the harbor. The sediment transport occurring around the harbor entrance can't be explained by the wind wave and wave induced current. In this study, it was investigated the mechanism of the entrainment of sediment into a small harbor with permeable breakwater using hydraulic experiments in 3D wave basin. It is found out that the significant sediment entrainment produced when the mode of oscillation in the harbor became the 1st mode. In the case where the incident wave period was shorter than the period that caused higher mode oscillation in harbor, only a little amount of sediment entrainment took place. The vortex shedding from the top of secondary breakwater played very important roll in the entrainment of sediment into the harbor. It is also found that the small jetty attached at the top of secondary breakwater could effectively prevent the entrainment of sediment into the harbor.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.69-75
• /
• 2014

Accurate analysis of fly ash particles is not trivial because of complex nature in physical and chemical properties. SPLITT fractionation (SF) was employed to fractionate the fly ash particles into subpopulations in large quantities. Then the SF-fractions were analyzed by the steric mode of sedimentation field-flow fractionation (Sd/StFFF) for size analysis. The SF-fractions were also analyzed by ICP-OES. The results showed that the fly ash is mainly composed of Fe, Ca, Mg and Mn. No particular trends were observed between the particle size and the concentrations of Fe, Ca, Mg, while Mn, Cu and Zn were in higher concentrations in smaller particles. Sample preparation procedures were established, where the fly ash particles were sieved to remove large contaminants, and then washed with acetone to remove organics on the surface of particles. The sample preparation and analysis methods developed in this study could be applied to other environmental particles.

• Korean Journal of Health Education and Promotion
• /
• v.11 no.2
• /
• pp.33-47
• /
• 1994

AIDS preventional efforts need to be guided by well trained health care personnel especially by school nurses for the adolescents. This study was designed to get basic data about AIDS educational program development for school nurses. The objectives of this study were to 1) identify AIDS knowledg of school nurses 2) identify AIDS attitudes of school nurses and 3) identify association between AIDS knowledge and sociodemographic characteristics. Data were collected from 173 subjects in Chonbuk province. Self-reporting questionnaire were administered during the period from 1st of June to 30th of June, 1994. AIDS related knowledge was measured by using 44 questions on cause(3 items), testing(3 items), mode of transmission(15 items), clinical manifestations(5 items), treatment(3 items), prevention(5 items), complication(4 items), infection control(3 items) and Using resources(3 items). AIDS related attitudes were measured by five point Likert scales using 13 questions on perceived threats from AIDS crisis (4 items), perceived severity to AIDS(2 items), perceived needs about psychosocial care for HIV infected patients(3 items) and perceived educational needs of AIDS(4 items). The collected data were analyzed by SPSS/PC/sup +/, using percentages, Mean and S.D. descriptive purpose and t-test or F for comparing the variables. The major findings were as follows: 1. Respondents ranged in knowledge of AIDS between 0 and 44 with the 33.79 mean score. Percentage of correctly answered respondents to each categories - mode of transmission : 87.0% - clinical manifestation : 85.0% - cause : 82.5% - prevention : 81.5% - treatment : 76.1% - infection control : 72.8% - testing of HIV infection 71.8% - using community resourses : 50.9% - complication : 45.8% 2. The respondents' attitudes of AIDS The majority(70%) showed higher perceived threat The majority(91.3%) showed higher perceived severity to AIDS crisis As a whole, perceived needs about psychosocial care for HIV infected patients negative The majority (over 96.5%) showed highly perceived educational needs of AIDS. 3. The relationship between AIDS knowledge and each of those general character. AIDS knowledge shows significant difference with age(F=3.50, p<.016), years of professional experience(F=4.14, p<.007) and received lecture about AIDS(F=4.54, p<.000). There was no significant difference between AIDS knowledge and job satisfaction.

• Asian Journal for Public Opinion Research
• /
• v.9 no.4
• /
• pp.331-351
• /
• 2021

The unprecedented situation of COVID-19 caused the government of India to instruct educational institutions to switch to an online mode to mitigate the losses for students due to the pandemic. The present study attempts to explore the impact of online learning introduced as a stop-gap arrangement during the pandemic in India. A survey was conducted (N=289), via Facebook and WhatsApp, June 1-15, 2020 to understand the accessibility and effectiveness of online learning and constraints that students of higher education across the country faced during the peak times of the pandemic. The analysis and interpretation of the data revealed that the students acclimatized in a short span of time to online learning, with only 33.21% saying they were not satisfied with the online learning mode. However, the sudden shift to online education has presented more challenges for the socially and economically marginalized groups, including Scheduled Caste (SC), Scheduled Tribes (ST), Other Backward Class (OBC), females, and students in rural areas, due to factors like the price of high-speed Internet (78.20% identified it as a barrier to online learning), insufficient infrastructure (23.52% needed to share their device frequently or very frequently), poor Internet connectivity, etc. According to 76.47% of respondents, the future of learning will be in "blended mode." A total of 88.92% of the respondents suggested that the government should provide high-quality video conferencing facilities free to students to mitigate the division created by online education in an already divided society.

• Ocean Science Journal
• /
• v.42 no.1
• /
• pp.41-48
• /
• 2007

We investigated the temperature and salinity effects on the major fish species in the wintering grounds based on trawl surveys and oceanographic observations in the southwestern waters of Korea during March-early April in 2002-2003. The influence area of warm Kuroshio water was limited to the southwestern area of Korea in 2003 with a range of $7.7-16.3^{\circ}C$, 32.54-34.70 of salinity, wider than that of 2002. The number of fish species and density of major fish species in 2003 were higher than in 2002. Geographical estimation showed high proportions of species number and catches in the areas around Jeju Islands, southwestern waters and the southeastern coast of Korea. Five species; silver pomfret (Pam pus echinogaster), hairtail (Trichiurus lepturus), anchovy (Engraulis japonicus), Small yellow croaker (Larimichthys polyactis) and yellow goosefish (Lophius litulon) were most abundant, composing above 60% of the total catch in 2002 and 2003. More than 50% of catch in the major fish species were mostly distributed in the range of $9.5-11.0^{\circ}C$ of temperature and 33.1-33.9 of salinity. Non-parametric estimation for the major species showed the 1st mode around $10^{\circ}C$ and the 2nd mode at $8-9^{\circ}C$ in 2002 and $11-14^{\circ}C$ in 2003. Among major fish species, hairtail was principally composed of juveniles, and larger individuals were caught in southeastern waters. These results are considered to be helpful for the area-based fishery management strategy for the wintering grounds of the Yellow Sea and coastal waters of Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4776-4783
• /
• 2014

Many studies have examined the reduction of primary noise sources, but quality-related noise, such as BSR, is rarely studied. This study describes the quantitative BSR test method using a multi-axial simulator. The sine sweep test was conducted to detect the system resonance and its relation to BSR noise with high frequency. This method is applied to the seat frame with/without the vibration durability test. The results showed that the $1^{st}$ lateral resonance leads to higher BSR frequency noise. In addition, the reduction of the lateral mode system stiffness after the durability test results in a decrease in the BSR noise in sine sweep test mode.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1989

This study analyzes the interannual periodicity by using the statistical techniques of probability, spectral analysis, empirical orthogonal function analysis (EOF), and coherency analysis. The data base for this study is the time series of 1971-1985 temperature, salinity in the southern waters of the East Sea, 1960-1986 mean sea level at Pusan and Izuhara, and 1960-1986 sea level atmospheric pressure at Pusan. The appearances of anomalous temperatures higher and lower than 15-year mean monthly average with one standard deviation are about 30% of total data. The significant interannual period for temperature, salinity and sea level fluctuation is 36.6, and 23.3 months. The empirical orthogonal function analyses show that the 1st mode of the EOFs is responsible for more than 90% of total variance of the surface temperature variations, while in near-bottom waters, the relative importance of the higher EOF modes is much greater explaining more than 30% of total variance. The coherency between normalized temperatures and salinities is significant at the interannual period of 36.6 and 21.3 months.

• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.37-43
• /
• 2015

Characteristics of dissimilar metal welds between STS 316L and carbon steel ASTM A516 Gr.70 made with GTAW have been evaluated in terms of microstructure, ferrite content, chemical analysis, hardness and corrosion resistance. Three heat inputs of 9.00, 11.25, 13.00kJ/cm were employed to make joints of dissimilar metals with ER309 wire. Based on microstructural examination, the amount of vermicular type of ${\delta}$-ferrite was increased with increasing heat input due to the increase of Creq/Nieq in the second layer of welds. Based on the EDX analysis of weld metals, Cr and Ni content in the 2nd layer increased while those content in the first layer of welds decreased with heat inputs. Cellular solidification mode in the 1st layer and dendritic solidification mode in the 2nd layer due to different cooling rates were prevailed, respectively. Heat affected zone which formed hard microstructure showed higher hardness than the weld metal. The salt spray test of dissimilar metals weld joints showed that the carbon steel surfaces only corroded. The weight loss rate due to corrosion increased up to 100hours but it decreased above 100 hours. There was little difference in the weight loss caused by corrosion regardless of heat inputs.