• The Journal of Korean Physical Therapy
• /
• v.29 no.5
• /
• pp.255-258
• /
• 2017

Purpose: This study aimed to investigate the effects of compelled weight shift in paretic lower limb training on balance ability in patients with stroke. Methods: Thirty-six individuals with hemiparesis, who were randomly assigned to a 10CWST (10 mm constrained -weight shift training) group, a 5CWST (5 mm constrained-weight shift training) group, and a control group participated in this study. Compelled weight shift training was performed in 3 sets of 5 min with a rest period of 1 min between sets. Both the 5CWST and 10CWST groups performed 5 times per week for 4 weeks. Static (mediolateral and anteroposterior sway velocities) and dynamic balance (mediolateral and anteroposterior distances) was assessed using the Good Balance system. Results: Significant differences were found in the M-L and A-P sway velocities, and the M-L sway distance. The M-L and A-P sway velocities, and M-L sway distance showed significantly large group effects (p<0.05), time effects (p<0.05), and group-by-time interaction (p<0.05). The post hoc analyses indicated that, following intervention, the 10CWST group showed more significant changes in the M-L and A-P sway velocities, and the M-L sway distance than the control group. Conclusion: These results suggest that the use of compelled weight shift in paretic lower limb training may be an effective method to improve balance ability in patients with stroke.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.111-122
• /
• 2013

This study was carried out to reduce patient dose through focus-detector distance, kilovoltage, and a combination of copper filters. In the C, L-spine lateral, Skull AP views were obtained by making changes of 60-100 kV in tube voltage and of 100-200 cm in focus-detector distance and by adding a copper filter when using an auto exposure control device in the digital radiography equipment. The incident dose showed 90 kV, 0.3 mmCu in C-spine lateral with 0.06 mGy under the condition of 200 cm; 100 kV, 0.3 mmCu with 0.40 mGy under the condition of 200 cm and 90 kV 0.3 mmCu in Skull AP with the lowest value of 0.24 mGy under the condition of 140 cm. It was observed that entrance surface dose decreased the most when was increased by 150 cm, 70 kV (C-spine lateral), 81 kV (L-spine lateral). It was also found out that as the between the focus-detector increased in the expansion of the video decreased but the difference was not significant when the distance was 180 cm or more. Skull AP showed the most reduction in the entrance surface dose when the tube voltage was changed by 80 kV, 0.1 mmCu, and 120 cm. Therefore, when using the automatic exposure control device, it is recommended to use the highest tube voltage if possible and to increase focus-detector distance at least by 150~200 cm in wall and 120~140 cm in table in consideration of the radiotechnologist's physical conditions, and to combine 0.1~0.3 mmCu and higher filters. It is thus expected to reduce patient dose by avoiding distortion of images and reducing the entrance surface dose.

• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.51-58
• /
• 2012

The purposes of the study were to examine the changes in carcass traits and surface meat color, and cortisol concentration by different altitudes and shipping distances for steer and cow. The experimental animals were shipped from Kangwondo, Kyunggido, Choongchungdo, and Kyungsangdo to Wonju LPC. The animals were examined for yield traits, quality traits, carcass grade, lightness, redness, yellowness, croma value, and cortisol concentration by different altitudes and shipping distances. The results showed that the carcass traits of steer like back fat thickness were not different by shipping distances of 100 km, 150 km, and 200 km. However, the fat thickness was higher in steers shipped from 250 km than 100 km, 150 km, and 200 km distance. Ribeye area was reduced significantly in 200 km and 250 km than 50 km. Yield index and yield grade were significantly low in 250 km than 50-200 km. However, meat color, fat color, texture, mature, and quality grade had no differences between shipping distances. Marbling score was not different in 50-200 km. However, the marbling score in 250 km was significantly lower than that of 50 km. In case of surface meat color by shipping distance, redness, yellowness, chroma value, and hue-angle were not different in shipping distance of 250 km. The lightness had similar result in 50-200 km. However, in case of 250 km the lightness was significantly low. The REA of cow carcass by shipping distance had no differences by shipping distance. The BET had similar results in 50-150 km. However, it had significantly thick in 200 km. The yield index and yield grade had no differences in 50-150 km. However, yield index and grade were significantly low in 200 km. The carcass trait of cow had no differences in all items by shipping distance. Although the carcass traits and the BET for steer by altitude had no differences between 100, 200, 300 and 500 m, but those were significantly thick in 400 m. And the yield index and the yield grade at altitude 400 m were lower than that of other altitudes. The quality traits and the quality grade had no differences between 100, 200, 300, 400, and 500 m altitudes. The yield traits, quality traits, yield grade, and quality grade had no significant differences by altitudes. In case of yield index of cow for 300 m was low than the cases of 100 m and 200 m. The surface meat color for steer and cow had no differences by altitudes. However, the lightness of cow had positive result in 100 m than 200 m and 300 m. In case of steer and cow the cortisol concentration by shipping distance was high as the shipping distances were longer. However, the cortisol concentrations of steer and cow by altitudes were decreased as the altitudes were increased. From the above results carcass traits and carcass grade were decreased and the cortisol concentration was increased as the altitudes were decreased for steer and cow.

• Journal of Korea Planning Association
• /
• v.53 no.7
• /
• pp.39-48
• /
• 2018

The purpose of this study is to verify the stable flight conditions of drones within a limited urban area by using the ICAO(International Civil Aviation Organization) reich model which is using to evaluate civil aircraft stability. The results of the study are summarized as follows. First, in order for the drones flying stably, the horizontal safety separation distance between a drone and another should be at least 1,852M. Second, assuming that no obstacles within 1,852M of horizontal space, two drones can be fly into upper and lower spaces. However there are obstacles such as buildings, it is impossible to secure a 1,852M distance between drones. Third, sensitivity analysis point out that the separation interval($s_x$) of drone aviation has the greatest influence on the TLS(Target Level of Safety). If future research is conducted to lower the numerical values, the safety distance between a drone and another drone will be drastically reduced, allowing more detailed urban space division, and will be presented as a scientific numerical value for establishing a dedicated path for the drones.

• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.58-66
• /
• 2011

This study presents the behavior characteristics of buried three-layered pipeline subjected to pile driving loads. The analysis considered the driving energy caused by 7 tonf of ram weight and 1.2m of stroke. Also the distance from vibration resource to pipeline varies in 5m to 30m. The vibration velocity and stress are investigated at the center of pipeline in longitudinal direction. In the same cover depth, attenuation ratio of vibration velocity and von Mises stresses for distance increment has shown a decreasing trend. The maximum stress occurs at the top and bottom for the inner pipe, however, an irregular stress distribution is found for the outer pipe.

• Physical Therapy Korea
• /
• v.24 no.3
• /
• pp.1-9
• /
• 2017

Background: The method of measuring the walking function of patients with chronic stroke differs depending on patients walking capability and environmental conditions. Objects: This study aimed to demonstrate the influences of walking capacity and environmental conditions on the results of short- and long-distance walk tests in patients with chronic stroke. Methods: Forty patients with chronic stroke volunteered for this study, and allocated to group-1 (<.4m/s, household walking, $n_1=13$), group-2 (.4~.8m/s, limited community ambulation, $n_2=16$), and group-3 (>.8m/s, community ambulation, $n_3=11$) according to their walking capacity. The 10-meter walk test (10MWT) and 6-min walk tests, (6MWT) were used to compare the short- and long-distance walk tests results, which were randomly performed under indoor and outdoor environmental conditions. Results: The comparison of the results obtained under the indoor and outdoor conditions revealed statistically significant differences between the groups in the 6MWT and 10MWT (p<.05). Post-hoc tests' results showed significant differences between groups-1 and -2 and between groups-1 and -3 in the 10MWT, and between group-1 and -3 in the 6MWT. Furthermore, in group-2 the 10MWT and 6MWT results significantly differed between the indoor and outdoor conditions, and the values measured under the indoor and outdoor conditions significantly differed between 10MWT and 6MWT (p<.05). Group-3 showed a significant difference in 10MWT results between the indoor and outdoor conditions (p<.05). Conclusion: These findings suggest that the results of the short- and long-distance walk tests may differ depending on the walking capacity of patients with chronic stroke and the environmental condition under which the measurement is made, and these effects were greatest for the patients with the limited community ambulation capacity.

• Advances in Traditional Medicine
• /
• v.4 no.2
• /
• pp.120-123
• /
• 2004

To test preschool children's medium- long distance stereoscopic vision normal average value, and intermittent strabismus children,s medium-long distance stereoscopic vision acuteness is the goal of this study. The software of random stereoscopic vision and graph, which is developed by Hu-Chong etc has been used, to test 414 cases normal preschool children and 19 cases intermittent exotropia childrens medium-long distance (1-5 m) stereoscopic vision (before operation and after operation). The normal average value of preschool children's medium-long distance stereoscopic vision was achieved. Intermittent exotropia children's stereoscopic vision acuteness was declined with the increase of distance. This method can provide reference as screening abnormal stereoscopic vision during scientific research and clinical work.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.150-155
• /
• 2011

The aim of this study was investigated long distance export condition of paprika from Korea to Canada, and evaluated the effect of non-perforated breathable films on the storability of paprika during MA storage in the simulated long distance export condition. The long distance export condition of paprika from Korea to Canada was $7{\pm}1^{\circ}C$ and RH 90% during shipping for 20 days, and then the temperature of that was increased to $13^{\circ}C$ for 3 hours during transferring from refrigerated container to storage room in Canada, and decreased $3{\sim}4^{\circ}C$ for 3 days before distributing to local markets. The temperature and relative humidity of local markets was $16^{\circ}C$ and 60%, respectively. The packing material treatments were non-packing, as control, perforated film (6 mm diameter hole, $18holes/m^2$), and 3 kind of laser treated non-perforated films (oxygen transmission rate was 5,000, 20,000 and 100,000 $cc/m^2{\cdot}day{\cdot}atm$). Under the simulated long distance export condition; $7^{\circ}C$ and RH 90% for 15 days and then $20^{\circ}C$ and RH 55% for 7 days, the fresh weight loss of paprika was less than 1% in 3 kind of laser treated non-perforated film treatments but was more than 4% in control and perforated film treatment that showed severe deterioration of visual quality after 20 days of storage. The atmosphere of paprika packages was changed 5% oxygen and 15% carbon dioxide in 5,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment, and 16% oxygen and 4~5% carbon dioxide in 20,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment during room temperature storage after cold storage for 15 days. A carbon dioxide concentration of these 2 treatments was exceeded the optimal MA and CA condition. There was no significant difference in ethylene concentration among 3 kind of laser treated non-perforated film treatments. A paprika packed with 100,000 $cc/m^2{\cdot}day{\cdot}atm$ non-perforated film showed the highest visual quality under the simulated long distance export condition. However, the firmness and soluble solids did not show any significant difference among 3 kind of laser treated non-perforated film treatments. Therefore, we may suggest that 100,000 $cc/m^2{\cdot}day{\cdot}atm$ laser treated non-perforated film was the proper film for MAP of paprika under long distance export condition that was $7{\pm}1^{\circ}C$ and RH 90% for 15 days, and then $20^{\circ}C$ and RH 55% for 7 days.

• Korean Journal of Plant Resources
• /
• v.10 no.3
• /
• pp.241-246
• /
• 1997

Linkage maps based on molecular markers are valuable tools in plant breeding and genetic studies. A population of 76 RI lines from the mating of A3733 and PI437.088 was evaluated with Random Amplified Polymorphic DNA(RAPD) and Simple Sequence Repeats (SSR) markers to create soybean molecular linkage map, 302 RAPD and 21 SSR markers were genetically linked and formed forty linkage groups. These linkage groups spanned a genetic distance of 1,775 cM. The average distance between markers was 5.5 cM.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.95-101
• /
• 2015

To accurately extract absolute distance information from a self-mixing interferometry (SMI) signal, in this paper we propose an approach based on a particle swarm optimization (PSO) algorithm instead of frequency estimation for absolute distance. The algorithm is utilized to search for the global minimum of the fitness function that is established from the self-mixing signal to find out the actual distance. A resolution superior to $25{\mu}m$ in the range from 3 to 20 cm is obtained by experimental measurement, and the results demonstrate the superiority of the proposed approach in comparison with interpolated FFT. The influence of different external feedback strength parameters and different inertia weights in the algorithm is discussed as well.