• Macromolecular Research
• /
• v.14 no.3
• /
• pp.300-305
• /
• 2006

The chemical structure of a semi-aromatic polyimide-I, which was prepared by the chemical imidization of cyclopentanetetracarboxylic dianhydride and 2,2-bis(4-aminophenyl)hexafluoropropane, was characterized by $^{13}C-NMR$ spectroscopy. The chemically imidized polyimide-I was used for the preparation of a photosensitive polyimide (PSPI) through the addition of benzophenone and benzophenone oxime hexamethylene diurethane (BOHD), a photobase generator containing oxime-urethane groups. The polyimide-I film containing benzophenone and BOHD was not soluble in 2.38 wt% tetrabutylammonium hydroxide solution in $H_2O$. However, it became soluble following irradiation with 310 nm UV light. A positive tone image with a resolution of $5{\mu}m$ was obtained with this PSPI, having sensitivity($D_c$) of $1.2J/cm^2$ and contrast(${\gamma}_p$) of 1.08. Thus, a polyimide, which is not intrinsically photosensitive, can become photosensitive through the addition of a photobase generator containing oxime-urethane groups as a photosensitive compound.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.1-10
• /
• 2005

Disperse dyes derived from heterocyclic compounds such as phenylindole, pyridone, diaminopyridine, and carbazole have been known to exhibit high light fastness and bathochromic shift compared to the coursponding aminoazobenzene. The synthetic method to obtain diaminopyridine derivatives, which can be used as coupling components, was chlorination of pyridone with phosphorous oxychloride, followed by substitution with various primary amines. Four azo disperse dyes were synthesized by coupling four diaminopyridines with 2-cyano-4-nitroaniline as a diazo component. Structures of these dyes were confirmed by $^1H$ NMR spectroscopy. The wavelengths of maximum absorption of the synthesized disperse dyes were in the range of $517\~528nm$, and molar extinction coefficients were $45,700\~50,100$. The dyeability of four disperse dyes toward PET fiber was generally good. Wash and rubbing fastnesses were excellent, while light and dry heat fastness were good.

• Journal of Dairy Science and Biotechnology
• /
• v.21 no.2
• /
• pp.138-147
• /
• 2003

We here analyzed and proposed the structures of the N-linked sugar chains of PAS-7 from bovine milk fat globule membrane. The N-linked sugar chains were liberated from PAS-7 by hydrazinolysis and, after modifying the reducing ends with 2-aminopyridine (PA), were separated into one neutral (7N,55%) and two acidic (7M mono-, 43%; 7D, di-, 2%) sugar chain roups. The latter were converted into neutral groups (7MN and 7DN) by sialidase digestion. The structure of each of these PA-neutral sugar chains was determined by sugar analysis, sequential exoglycosidase digestion, partial acetolysis, and 1H-NMR spectroscopy. The results show that the 10 sugar chains were of the biantennary complex type with and without fucose. The structure of 7N2A one of the major sugar chains, was proposed as; [structure: see text] A structural comparison between PAS-6 and -7 indicated that although they shared the same protein core, their sugar moiety was markedly different, involving the existence of a different pathway during the post-transcriptional modification.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.110-117
• /
• 2000

A series of new liquid crystalline dimesogenic compounds with chiral tails was synthesized, and their thermal and liquid crystalline properties were studied. The chain length of the central polymethylene spacers (x) was varied from dimethylene (2) to decamethylene (12). These compounds were characterized by elemental analysis, IR and NMR spectroscopy, differential scanning calorimetry (DSC), and cross-polarizing microscopy. All compounds were found to be enantiotropically liquid crystalline, and the values of melting ($T_m$) and isotropization temperature ($T_i$) as well as enthalpy change (Δ$H_i$) and entropy change for isotropization (Δ$S_i$) decreased in a zig-zag fashion revealing the so-called odd-even effect as x increases. Their mesomorphic properties fall into three categories depending upon x; (a) compounds with x=2 and 4 formed two different mesophases, smectic and cholesteric phases in that order on heating, and vice versa on cooling, (b) compounds with x=3, 7, 8, 10 and 11 reversibly formed only the cholesteric phase, and (c) compounds with x=5, 6, 9 and 12 exhibited only a cholesteric phase on heating, whereas on cooling they formed two different mesophases, cholesteric and smectic phases, sequentially.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1647-1652
• /
• 2012

With the objective to design and synthesis of Schiff's base symmetrical liquid crystal dimmers and to study the effect of molecular structure variation ($o-ortho$, $m-meta$, $p-para$) and change in alkoxy terminal chain length on mesomorphic properties of liquid crystals, We have synthesized Schiff base dimers from dialdehyde derivative containing 2-hydroxy-1,3-dioxypropylene as short spacer with aniline derivatives having different lengths of terminal alkoxy chains ($n$ = 5, 7, 9). The chemical structure of the final products was characterized by proton nuclear magnetic resonance ($^1H$ NMR) spectroscopy and fourier transform infrared (FT-IR) spectroscopy. The mesomorphic properties and optical textures of the resultant dimers were characterized by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The existence of smectic A phase transition was confirmed by the observation of batonnets and fan shaped textures in optical microscopy when compound were heated from crystalline phase. All of the dimers of this series, with the exception of $\mathbf{2S_5}$ -ortho, -meta, -para, were thermotropic liquid crystal. The compound $\mathbf{2S_9}$ -meta was monotropic, while the rest were enantiotropic. It was found that the change in terminal alkoxy chain length has pronounced effect on the mesomorphic properties. The temperature range of smectic A phase window widens with increasing alkoxy chain length.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.7
• /
• pp.1061-1068
• /
• 2010

The biological synthesis of nanoparticles has gained considerable attention in view of their excellent biocompatibility and low toxicity. We isolated and purified rhamnolipids from Pseudomonas aeruginosa strain BS-161R, and these purified rhamnolipids were used to synthesize silver nanoparticles. The purified rhamnolipids were further characterized and the structure was elucidated based on one- and two-dimensional $^1H$ and $^{13}C$ NMR, FT-IR, and HR-MS spectral data. Purified rhamnolipids in a pseudoternary system of n-heptane and water system along with n-butanol as a cosurfactant were added to the aqueous solutions of silver nitrate and sodium borohydride to form reverse micelles. When these micelles were mixed, they resulted in the rapid formation of silver nanoparticles. The synthesized nanoparticles were characterized by UV-Visible spectroscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy (EDS). The nanoparticles formed had a sharp adsorption peak at 410 nm, which is characteristic of surface plasmon resonance of the silver nanoparticles. The nanoparticles were monodispersed, with an average particle size of 15.1 nm (${\sigma}={\pm}5.82$ nm), and spherical in shape. The EDS analysis revealed the presence of elemental silver signal in the synthesized nanoparticles. The formed silver nanoparticles exhibited good antibiotic activity against both Grampositive and Gram-negative pathogens and Candida albicans, suggesting their broad-spectrum antimicrobial activity.

• Macromolecular Research
• /
• v.9 no.2
• /
• pp.116-121
• /
• 2001

A series of poly(1,4-phenylenevinylene-alt-3-alkyl-2,5-thienylenevinylene)s (alkyl = hexyl [PPV-alt-6-TV] and octyl (PPV-alt-8-TV] group) have been synthesized by the Heck coupling reaction. These polymers were characterized using $^1$H-NMR, FT-IR spectroscopy, and thermogravimetric analysis (TCA). They are solvent processible and have obviously copolymeric structure. The photophysical properties of the polymers were investigated using UV-visible and steady-state photoluminescence(PL) spectroscopy. We studied the change of light-emitting properties by incorporating the thiophene group into the PPV polymer backbone using alternating copolymer system. The properties of two synthesized polymers are very similar, but they exhibited apparent changes of light-emitting properties compared with other PPV backbone based polymers. The broad absorption bands from 350 to 570 nm are due to $\pi$-$\pi$* transitions of the polyconjugated systems. The absorption maxima of the two polymers were found at about 452 and 448 nm for PPV-alt-6-TV and PPV-alt-8-TV, respectively. The copolymers showed broad PL spectra between 550 and 700 nm without vibronic bands and PL emission maxima of PPV-alt-6-TV and PPV-alt-8-TV are about 620 and 605 nm, respectively. The copolymers exhibited the red emission (PPValt-6-TV), but more red shifted emissions are needed to obtain real red color.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.148-155
• /
• 2018

To get a better understanding of the effect of physicochemical properties and microstructure on $SO_2$ absorption behavior of DESs with different molar ratios of EmimCl and EG (from 2:1 to 1:2), densities (${\rho}$), viscosities (${\eta}$), speeds of sound (u), refractive indices ($n_D$), and thermal decomposition temperatures ($T_d$) of EmimCl-EG DESs were measured and used to obtain the other derived properties, such as thermal expansion coefficient (${\alpha}_p$) and activation energy for viscous flow ($E_{\eta}$). Moreover, FT-IR spectra and in situ variable-temperature NMR spectroscopy were employed to study the microstructures of DESs. Based on physicochemical and spectroscopic properties, the influence of the concentrations of EmimCl on the interactions in DESs was explored to be associated with their $SO_2$ absorption behavior. The results show that the interactions between $Emim^+$ and $Cl^-$ of EmimCl is gradually weakening with increasing the concentration of EG in DESs by forming of hydrogen bond interaction of $O-H{\cdots}Cl^-$, resulting in a decrease of ${\rho}$, ${\eta}$, u, $n_D$, and $T_d$ of DESs, and hindering the charge-transfer interaction of $SO_2$ with $Cl^-$ and deceasing $SO_2$ capture capacity. Moreover, the $SO_2$ absorption capacity of DESs is proportional to their ${\rho}$ and $E_{\eta}$, respectively.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.71-77
• /
• 2015

We synthesized a low band gap alternating copolymer containing electron-rich units (i.e. dithienosiloles and benzodithiophenes) and electron-deficient units (i.e. difluorobenzothiadiazoles) for high performance organic solar cells. The polymer was prepared by the Stille coupling reaction and characterized using $^1H$ NMR, GPC, TGA, UV-visible absorption spectroscopy, and cyclic voltammetry. Solar cells were fabricated in a structure of ITO/PEDOT:PSS/polymer: $PC_{70}BM/Al$ with five different blending ratios of polymer and $PC_{70}BM$ (1:1.5, 1:2, 1:3, 1:3.5 and 1:4 by weight ratio). The best efficiency was achieved from the 1:3 ratio of polymer and $PC_{70}BM$ in the photoactive layer, and TEM revealed that there is an optimal nanoscale phase separation between polymer and $PC_{70}BM$ in the 1:3 ratio blend film.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.391-398
• /
• 2013

Soil organic carbon (SOC) has the potential to promote the soil quality for sustainability and mitigation of global warming. There is little information on organic carbon composition despite of having resistance of carbon degradation in soil. In this study, to understand the effect of volcanic ash on organic carbon composition and quantity in soil, we investigated characteristics of volcanic soil and compared organic carbon composition of soil and humic extract by using $^{13}C$-CPMAS-NMR spectra under soil profiles of Namweon series in Jeju. SOC contents of inner soil profiles were 134.8, 101.3, and 27.4 g C $kg^{-1}$ at the layer of depth 10-20, 70-80 and 90-100 cm, respectively. These layers were significantly different to soil pH, oxalate Al contents, and soil moisture contents. Alkyl C/O-alkyl C ratio in soil was higher than that of humic extracts, which was decreased below soil depth. Aromaticity of soil and humic extract was ranged from 29-38 and 24-32%, which was highest at the humic extract of 70-80 cm in soil depth. These results indicate that the changes of SOC in volcanic ash soil resulted from alteration of organic composition by pyrolysis and stability of organic carbon by allophane in volcanic ash soil.