• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4773-4779
• /
• 2012

In this paper we propose two types of reconfigurable 3-D beam steering antenna for intelligent or smart antenna system. Proposed antennas are composed of triangular(structure1.) or circuler(structure2.) loop structure and bended dipole antenna structure. This antenna can steer beam pattern of 6 direction at xy-plane state (0, 1, 2) and xz-plane state (3, 4, 5) by 4 switch motion with one antenna element. Antenna structure1. is symmetric equilibrium structures based on feeding point. There is no grounding point. As a result, designed antenna's gain is similar to dipole antenna. Also, As unbalanced structure by using CPWG in the form of a semicircular, structure2. is enhanced directivity. The operation frequency of antenna are 2.5 GHz(Structure1.) and 2.55 GHz(Structure2.), maximum gain is 1.04 ~ 2.06 dBi(Structure1. : Omni-directional beam), 1.6 ~ 4 dBi(structure2. : Directional beam). The overall HPBW is about over $160^{\circ}$ in the both of the xy-plane and xz-plane at structure1. and over $125^{\circ}$ at structure2.

• Journal of the Korean Magnetic Resonance Society
• /
• v.17 no.1
• /
• pp.59-66
• /
• 2013

BldD, a developmental transcription factor from Streptomyces coelicolor, is a homodimeric, DNA-binding protein with 167 amino acids in each subunit. Each monomer consists of two structurally distinct domains, the N-terminal domain (BldD-NTD) responsible for DNA-binding and dimerization and the C-terminal domain (BldD-CTD). In contrast to the BldD-NTD, of which crystal structure has been solved, the BldD-CTD has been characterized neither in structure nor in function. Thus, in terms of structural genomics, structural study of the BldD-CTD has been conducted in solution, and in the present work, mainchain NMR assignments of the recombinant BldD-CTD (residues 80-167 of BldD) could be achieved by a series of heteronuclear multidimensional NMR experiments on a [$^{13}C/^{15}N$]-enriched protein sample. Finally, the secondary structure prediction by CSI and TALOS+ analysis using the assigned chemical shifts data identified a ${\beta}-{\alpha}-{\alpha}-{\beta}-{\alpha}-{\alpha}-{\alpha}$ topology of the domain. The results will provide the most fundamental data for more detailed approach to the atomic structure of the BldD-CTD, which would be essential for entire understanding of the molecular function of BldD.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.33-37
• /
• 2003

A low-power $1{\times}2$ polymeric thermo-optic switch with a trench structure is proposed and fabricated. The trench structure in the optimized region slows down the heat flow from the electrodes, which contributes to the reduction of power consumption. The temperature distribution in the polymer layers has been adjusted to increase the temperature gradient between the two arms of the Y-branch. For comparison, a $1{\times}2$ polymeric thermo-optic switch with no trench structure is fabricated together on the same substrate. In the device with a trench structure, the measured crosstalk is less than -17.0 dB for TE polarization.-15.0 dB for TM polarization. The power consumption is about 66 mW, which is 25% less than that of the device with no trench structure.

• Journal of Species Research
• /
• v.12 no.1
• /
• pp.38-47
• /
• 2023

Seven new species of genus Dysidea (Demospongiae: Dictyoceratida: Dysideidae) are described from Jejudo Island and Geomundo Island, Korea. These new species are compared with other reported species in fibre structure and arrangement, and cored detritus. Dysidea reticulum n. sp. is similar to D. glavea in skeletal structure but differ in sponge shape. Dysidea simplex n. sp. is close to D. glavea with loosely arranged skeletal structure but fibres in this new species are not cored with large sands. Dysidea pyeongdaensis n. sp. is characterized by tube-like surface oscules open toward the sandy bottom. Dysidea capillus n. sp. is similar to D. dokdoensis in skeletal structure, but differs in long surface conules. Dysidea mukriensis n. sp. is close to D. corallina in distinct dense surface conules, but differs in sponge shape and skeletal structure. Dysidea membrana n. sp. is similar to D. sabulum in primary fibres cored with numerous large sands, but differs in sponge surface conules and secondary fibres. Dysidea chujaensis n. sp. is unique in the sponge shape and skeletal structure.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.238-242
• /
• 2020

This paper presents a technique using a multilayered dielectric coating to reduce the radar cross section (RCS) value of an integrated mast mounted in a destroyer. The proposed multilayer structure has the advantage of being easy to fabricate because the dielectric constant is defined so that a general dielectric that does not contain a magnetic component that requires high dielectric constant or is frequently used for blocking electromagnetic wave absorption can be used. After applying the proposed multi-layer dielectric structure to the integrated mast shape, the simulation results show that the RCS reduction performance is 10.9dB at 6GHz, 11.95dB at 12GHz, and 11.63dB at 18GHz compared to the structure without the multilayer structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1152-1155
• /
• 2007

Lately concerns about structure have been increased by advantages of floor impact noise, poilitical induction and changeability. Hence, Flat Plate Structure has been constructed increasingly. This study shows the comparison of the performance of sound insulation of Flat Plate Structure System and the existing Wall Structure. For this study, taking the same level organization of Daelim Architectural Environmental Research Center, I found the performance of sound insulation between the upper and lower floors about Wall Structure and Flat Plate Structure. Consequently, the performance of sound insulation between upper and lower floors of Flat Plate Structure was 3-5dB higher was approximately 3-5dB higher than one of Wall Structure. Especially, the performance of sound insulation on the upper floor was 1-3dB higher than on the lower floor. In addition, as the result of comparing radiation sound which radiates from the wall of lower floors with each structure system, Flat Plate Structure was about 4dB higher with Rw than Wall Structure. As we see totally, the performance of sound insulation of Flat Plate Structure is highter than one of the Wall Structure. It is 3-5dB higher and the main reason for this result depends on the existence of the wall which can radiate sound and nonexistence.

• Journal of Fashion Business
• /
• v.23 no.3
• /
• pp.67-84
• /
• 2019

Since the early 2000s, various fashion design products that use 3D printing technology have constantly been introduced to the fashion industry. However, given the nature of 3D printing technology, the flexible characteristics of material of textile fabrics is yet to be achieved. The aim of this study is to develop the optimal design conditions for production of flexible and elastic 3D printing fabric structure based on plain weave, which is the basic structure in fabric weaving using SLS 3D printing technology. As a the result this study aims to utilize appropriate design conditions as basic data for future study of flexible fashion product design such as textile material. Weaving structural design using 3D printing is based on the basic plain weave, and the warp & weft thickness of 4mm, 3mm, 2mm, 1.5mm, 1mm, and 0.7mm as expressed in Rhino 6.0 CAD software program for making a 3D model of size $1800mm{\times}180mm$ each. The completed 3D digital design work was then applied to the EOS SLS Machine through Maker ware, a program for 3D printer output, using polyamide 12 material which has a rigid durability strength, and the final results obtained through bending flexibility tests. In conclusion, when designing the fabric structure design in 3D printing using SLS method through application of polyamide 12 material, the thickness of 1 mm presented the optimal condition in order to design a durable digital textile structure with flexibility and elasticity of the 3D printing result.

• Journal of Integrative Natural Science
• /
• v.4 no.3
• /
• pp.202-209
• /
• 2011

Tuberculosis is a major health problem in humans because of its multidrug resistance and discovering new treatments for this disease is urgently required. The synthesis of isoprenoids in Mycobacterium tuberculosis has been reported as an interesting pathway to target. In this context, 2C-methyl-D-erythritol 4-phosphate (MEP) pathway of M. tuberculosis has drawn attention. The MEP pathway begins with the condensation of glyceraldehyde 3-phosphate and pyruvate forming 1-deoxy-D-xylulose 5-phosphate (DXP) which is catalyzed by 1-deoxy-D-xylulose 5-phosphate synthase (DXS). As there is no X-ray structure was reported for this target, comparative modeling was used to generate the three dimensional structure. The structure was further validated by PROCHECK, VERIFY-3D, PROSA, ERRAT and WHATIF. Molecular docking studies was performed with the substrate (Thiamine pyrophosphate) and the reported inhibitor 2-methyl-3-(4-fluorophenyl)-5-(4-methoxy-phenyl)-4H-pyrazolol[1,5-a]pyrimidin-7-one) against the developed model to identify the crucial residues in the active site. This study may further be useful to provide structure based drug design.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.136-145
• /
• 2002

In this paper, we facilitate the analysis of 1D PBG structure using a ABCD matrix formulation after converting field parameters into circuit parameters. Dispersion diagrams for an infinite 1D PBG structure are derived and compared with the frequency responses for a finite structure (N=10). When the proposed method is adopted, the analysis and synthesis of 1D PBG structures become very convenient.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.1-13
• /
• 2018

3D printing technology, which is expected to play a leading role within the Fourth Industrial Revolution, is becoming distinguished not only in the space, automotive, medical and engineering industries, but also in the area of design. The fashion and textile structures created by 3D printing technology were classified into three types - basic structure, unified structure, and a new physical structure. When traditional weaving, knitting, and stitching was reinterpreted through 3D printing, there were apparent limitations in reproducing the characteristics of fabric structures due to differences in the materials and structures of traditional textiles. New physical structures are being developed to break away from merely reproducing traditional textile structures, and to bring out the characteristics of 3D printing technology. As examples of new physical structures, there are the kinematics structure which utilizes the hinge method, mesostructure cellular material, and the N12 disk structure. Such techniques potentially open a new paradigm of fashion and textile structures. Some innovative aspects of 3D printing technology may result in changes in the methods of collaboration, manufacturing, and distribution. Designers are receiving help from specialists of various backgrounds to merge 3D printing technology to create original works. Also, 3D printing not only makes personalized custom designs available, but shortens the distribution channels, foretelling a change within the fashion and textile industry.