• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.159-166
• /
• 2009

In this paper, we analyse the noise robustness of MLPs(Multilayer perceptrons) through deriving the probability density function(p.d.f.) of output nodes with additive input noises and the misclassification ratio with the integral form of the p.d.f. functions. Also, we propose linear preprocessing methods to improve the noise robustness. As a preprocessing stage of MLPs, we consider ICA(independent component analysis) and PCA(principle component analysis). After analyzing the noise reduction effect using PCA or ICA in the viewpoints of SNR(Singal-to-Noise Ratio), we verify the preprocessing effects through the simulations of handwritten-digit recognition problems.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.28.1-28.1
• /
• 2008

Detection of spectral bio-signatures from extra terrestrial planets has received an increasing attention from the astronomy and space science communities in recent years. In an attempt to better-understand disk averaged spectra of the only know terrestrial planet i.e. Earth, we are constructing a scale-able 3D earth model with surface reflectance and scattering properties. The USGS coastal line data were used to form coastal line segments and they were then stitched to generate continuous coastal lines to represent major continents and large islands. As the first stage of model verification, wavelength dependent ocean and land reflectance data and scattering characteristics were defined over the land and sea surfaces respectively. We then performed ray tracing based imaging and radiometric transfer simulations using a hypothetical optical payload receiving the reflected and scattered sun lights from the earth. The model concept, computational details, the simulation results are discussed as well as the future development plan.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.389-393
• /
• 2010

The Objective of this study was to develop a system for visualizing inundation area by using 1-D numerical model analyzing damage information such as inundation area, facilities, land usages, population, building, loads. In this study, we have reviewed hydraulic models to select a flood model for simulation of discharges, water depths and velocities. The study area is Namhan River from Youngwol to Paldang Dam which had a flood damage on upper and below regions of Chungju Dam by a storm event in 2006. At the first, we developed the DB system base on GIS thematic map, ortho images, cadastral maps to analyze flood damages and support decisions making. Changing the boundary conditions such as discharge at the gauging stations, flood simulations were performed and then damages were extracted from the databases information support system based on 1-D numerical hydraulic model, it is expected to be able to analyze flood damages and support a decision making for reduce flood relate damages. In the future, the system developed in this study could be applied for flood forecasting system of small scaled streams.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2007

In this paper, we propose an unmanned patient monitoring system design and performance of a motion capture and sound detection. Unmanned patient monitoring system can be used in the greek koma and meaning deep sleep patient to need 24 hour surveillance. To monitoring, we used laptop, CCTV camera (or PC camera), A/D converter, microphone and detection program. The detection program based on the frame difference method and sound level meter. It had several functions such as data collecting and storing. All of this system was tested in several the simulations of emergency situations. It can be expected that an unmanned patient monitoring system can be used in emergency situation and patient care.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.301-307
• /
• 2002

A multilayer ceramic chip antenna with helical structure is analyzed to enhance the narrow bandwidth of conventional ceramic chip antennas. The simulations are performed by HFSS to verify the effects of structural parameters on impedance bandwidth. The multilayer ceramic chip antennas consist of a rectangular-parallelepiped ceramic body$({\varepsilon}_r=7.8,\; tan\; {\delta}=0.0043)$ and helical conductor patterns are embedded in the ceramic body using LTCC-MLC technology. 3D structure design of the multilayer ceramic chip antenna suitable for IMT-2000 (1,920~2,170 MHz) handset has been implemented, and experimental results are presented and discussed.

• Smart Structures and Systems
• /
• v.1 no.3
• /
• pp.267-282
• /
• 2005

This work describes ongoing development of an embedded sensor system for the early detection and prevention of deterioration of reinforcing steel tendons within reinforced concrete. These devices will evaluate the condition of the steel tendon using ultrasonic techniques and then wirelessly transmit this data to the outside world without human intervention. The ultrasonic transducers and the interpretation of the sensed signals that allow detection and prognosis of tendon condition are detailed. Electrical characterization of concrete mixtures used in bridge construction is conducted and a wideband microstrip antenna is designed and fabricated to operate between 2.4 and 2.5 GHz when embedded in such a medium. Simulations and measurements of the embedded antenna element are presented. Transceiver selection and implementation are discussed as well as future work in operational protocols, sensor networking, and power sources. By implementing commercially available off-the-shelf components whenever possible, these devices have the potential to save millions of dollars a year in evaluation, repair and replacement of reinforced concrete.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.62-68
• /
• 2014

Coptis chinensis 3'-hydroxy-N-methylcoclaurine 4'-O-methyltransferase (HOMT), an essential enzyme in the berberine biosynthetic pathway, catalyzes the methylation of 3'-hydroxy-N-methylcoclaurine (HMC) producing reticuline. A 3D model of HOMT was constructed by homology modeling and further subjected to docking with its ligands and molecular dynamics simulations. The 3D structure of HOMT revealed unique structural features which permitted the methylation of HMC. The methylation of HMC was proposed to proceed by deprotonation of the 4'-hydroxyl group via His257 and Asp258 of HOMT, followed by a nucleophilic attack on the SAM-methyl group resulting in reticuline. HOMT showed high substrate specificity for methylation of HMC. The study evidenced that Gly117, Thr312 and Asp258 in HOMT might be the key residues for orienting substrate for specific catalysis.

• Journal of the Optical Society of Korea
• /
• v.9 no.1
• /
• pp.26-31
• /
• 2005

We describe the design and the implementation of video-rate reflection confocal scanning microscopy (CSM) using an acousto-optical deflector (AOD) for the fast horizontal scan and a galvanometer mirror (GM) for the slow vertical scan. Design parameters of the optical system are determined for optimal resolution and contrast. The OSLO simulations show that the performances of CSM are not changed with deflection angle and the wavefront errors of the system are less than 0.012λ. To evaluate the performances of designed CSM, we do a series of tests, measuring lateral and axial resolution, real time image acquisition. Due to a higher axial resolution compared with conventional microscopy, CSM can detect the surface of sub-micrometer features. We detect 138㎚ line shape pattern with a video-rate (30 frm/sec). And 10㎚ axial resolution is archived. The lateral resolution of the topographic images will be further enhanced by differential confocal microscopy (DCM) method and computational algorithms.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.195-200
• /
• 2012

We present a new algorithm which can improve the tracking performance of the double-talk robust algorithm. A detection method of the echo path change and a modification method for the update equation of the conventional adaptive filter are proposed. A duration of the high error signal to scale parameter ratio varies according to the call status and this property is used to detect the echo path change. The proposed update equation of the adaptive filter improves the tracking performance by prohibiting wrong selection of the error signal. Simulations using real speech signals and echo paths of the ITU-T G.168 standard confirmed that as compared to the conventional algorithm, the proposed algorithm improved the tracking performance by more than 4 dB.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.355-360
• /
• 2011

In this paper, the performance of OFDM (Orthogonal Frequency Division Multiplexing) was assessed by using computer simulations performed using Matlab. We analyzed channel estimation algorithm for adaptive modulation techniques and effect of system using designed simulator in Multimedia wireless communication multipath fading channel environment. Also, we analyzed performance of adaptive OFDM systems that apply adaptive equalizer using guided result through BER. In result, in case of adaptive modulation OFDM systems that modulation mode changes according to channel state, we knew that adaptive modulation OFDM systems have gains of about 7dB performance than general system (BER=$10^{-1}$). Thus we know that adaptive OFDM propose systems is required for efficient transmission in the high speed Multimedia wireless communication channel environment.