• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.75-80
• /
• 2009

유한요소법을 이용한 3차원 모델링은 모형에 대한 기하학적 유연성에도 불구하고 대형 연립방정식에 대한 계산이 필요하여 실용성에는 많은 제약이 있었다. 본 연구에서는 최근 컴퓨터와 수치해석기술을 바탕으로 직접해법과 반복해법을 선택적으로 사용한 효율적인 유한요소 3차원 모델링을 구현하였다. 직접해법인 PARDISO는 멀티코어 계산환경에서 병렬 연산을 이용하여 계산속도를 현저히 감소시킬 수 있었고 특히 단딜 주파수 다중 송신의 계산에서 최대의 계산효율을 보였다. 소규모 메모리 환경에서는 BiCGSTAB(1)이 다른 반복해법들에 비해 빠르고 안정적으로 수치해를 계산하였다. 효율적인 3차원 모델링은 주어진 문제와 상황에 적합한 해법을 선택적으로 사용함으로써 가능하다. 모델링에는 다양한 형태의 인공송신원이 고려되어 있으며 향후 3차원 역산의 효율적인 엔진으로 활용할 수 있다.

• 농업과학연구
• /
• 제48권3호
• /
• pp.515-526
• /
• 2021

The frequency of typhoons and torrential rainfalls has increased due to climate change, and the concurrent risk of breakage of dams and reservoirs has increased due to structural aging. To cope with the risk of dam breakage, a more accurate emergency action plan (EAP) must be established, and more advanced technology must be developed for the prediction of flooding. Hence, the present study proposes a method for establishing a more effective EAP by performing flood and inundation analyses using one- and two-dimensional models. The probable maximum flood (PMF) under the condition of probable maximum precipitation (PMP) was calculated for the target area, namely the Gyeong-cheon reservoir watershed. The breakage scenario of the Gyeong-cheon reservoir was then built up, and breakage simulations were conducted using the dam-break flood forecasting (DAMBRK) model. The results of the outflow analysis at the main locations were used as the basis for the one-dimensional (1D) and two-dimensional (2D) flood inundation analyses using the watershed modeling system (WMS) and the FLUvial Modeling ENgine (FLUMEN), respectively. The maximum inundation area between the Daehari-cheon confluence and the Naeseong-cheon location was compared for each model. The 1D flood inundation analysis gave an area of 21.3 km², and the 2D flood inundation analysis gave an area of 21.9 km². Although these results indicate an insignificant difference of 0.6 km² in the inundation area between the two models, it should be noted that one of the main locations (namely, the Yonggung-myeon Administrative and Welfare Center) was not inundated in the 1D (WMS) model but inundated in the 2D (FLUMEN) model.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.180-183
• /
• 2004

This paper presents a description of the point collocation method and its application to the electromagnetic field computation. The interpolation scheme is based on the fast moving least square reproducing kernel approximation. In the method, the integration cell is not required and the essential boundary conditions can be enforced directly. Numerical simulations on 1-D and 2-D problems are carried out to validate the method. It is found that computational efficiency is higher than the general mesh-free methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.51-54
• /
• 2004

In this paper, we analyze the performance of LDPC decoder for DVB-S2 system. The performance analysis is performed by computer simulations based on AWGN channel and high order modulation technique including 16APSK and 32APSK. For normal frame codeword length N = 64800, the performance of LDPC decoder is only away 0.7dB to 1dB from Shannon limit with respect to each modulation. The constructions and encoding process of LDPC codes which are used for DVB-S2 system are also presented and described.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.175-178
• /
• 2014

The flame cell dynamics in 2-D opposed nonpremixed tubular configuration was investigated using high-fidelity numerical simulations. The diffusive-thermal instability occurs as the $Damk{\ddot{o}}hler$ number, Da, approaches the 1-D extinction limit of the tubular flames and several flame cells are generated depending on Da, and flame radius. In general, the number of flame cells are found close to the largest wave number from the linear stability analysis. It was also found from the displacement speed analysis that during the local flame extinction and cell formation, negative edge flame speed is observed due to small gain from reaction compared to large loss from diffusion.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.429-438
• /
• 2017

Cranke-Nicolson scheme in native OpenFOAM source libraries was not able to provide 2nd order temporal accuracy of velocity and pressure since the volume flux of convective nonlinear terms was 1st accurate in time. In the present study the simplest way of getting the volume flux with 2nd order accuracy was proposed by using old fluxes. A possible numerical instability originated from an explicit estimation of volume fluxes could be handled by introducing a weighting factor which was determined by observing the ratio of the finally corrected volume flux to the intermediate volume flux at the previous step. The new calculation of volume fluxes was able to provide temporally accurate velocity and pressure with 2nd order. The improvement of temporal accuracy was validated by performing numerical simulations of 2D Taylor-Green vortex of which an exact solution was known and 2D vortex shedding from a circular cylinder.

• 소성∙가공
• /
• 제4권1호
• /
• pp.79-91
• /
• 1995

Precision forming of electronic components has appeared to be competitive according to manufacturing cost and dimensional tolerances. Now domestic electronic companies have been involving in utilization of the finite element method in process design of precision forming. A forming process to produce an electronic component, aperture, has been inbestigated to find out forming defects during multi-operations. The applications of the commercial FEM software MARC show a possibility of defect in precision coining process among the whole multi-process. Thus the coining process of three-dimensional deformation is analyzed using DAMF-3D which has been developed in this lab with the rigid-plastic algorithm. The result f simulations by DAMF-3D provides clear description of the defect involved in the coining process.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권5호
• /
• pp.233-240
• /
• 2001

This paper presents a time series prediction method using a fuzzy rule-based system. Extracting fuzzy rules by performing a simple one-pass operation on the training data is quite attractive because it is easy to understand, verify, and extend. The simplest method is probably to relate an estimate, x(n+k), with past data such as x(n), x(n-1), ..x(n-m), where k and m are prefixed positive integers. The relation is represented by fuzzy if-then rules, where the past data stand for premise part and the predicted value for consequence part. However, a serious problem of the method is that it cannot handle nonstationary data whose long-term mean is varying. To cope with this, a new training method is proposed, which utilizes the difference of consecutive data in a time series. In this paper, typical previous works relating time series prediction are briefly surveyed and a new method is proposed to overcome the difficulty of prediction nonstationary data. Finally, computer simulations are illustrated to show the improved results for various time series.

• 한국군사과학기술학회지
• /
• 제5권4호
• /
• pp.88-96
• /
• 2002

The CSCM Upwind method and Material Transport Analysis(MTA) have been used to predict the thermal response and shape changes for charring/non-charring material which can be used as thermal protection material(TPM) on blunt-body nose tip. We performed intensive flight trajectory simulations to compare 1-D MTA results with those of 2-D/Axisymmetric MTA by using MTAs and Navier-Stokes code. Theheat-transfer rate and pressure distribution were predicted at selected altitudes and wall temperature along the flight trajectory and the shape changes of blunt-body nose tip were predicted subsequently by using current procedure.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.161-166
• /
• 2007

In this paper, two 4$\times$4 rectangular patch array antennas operating at 20 GHz are implemented for the satellite communication. The sixteen patch antennas and microstrip feeding line are printed on a single-layered substrate. The design goal is to achieve high directivity and gain by optimizing design parameters through permutations in element spacing. The spacing between the array elements is chosen to be 0.736$\lambda$. Numerical simulation results indicate that the HPBW(Half-Power Beam Width) of the 4$\times$4 patch array antenna is 18.78 degrees in the E-plane and 18.48 degrees in the H-plane with a gain of 17.18 dBi. Numerical simulations of a 4$\times$4 recessed patch array antenna yield a HPBW of 18.71 degrees in the E-plane and 17.82 degrees in the H-plane with a gain of 19.43 dBi.