• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.2
• /
• pp.129-136
• /
• 1970

As an attempt to determine if the morphological differences between the southern and western oysters are due simply to the local ecological factors or are based on their fundamental genetic nature, oyster seeds produced in 1968 at Tong-Young, Ye-Chun, and Ko-Hung on the south coast and at Kan-Wol-Do on the west coast were cross-transplanted during May of 1969 to compare their growth. The spats were placed in plastic baskets which permitted free water flow through and the baskets hung from a wooden rack located at a tidal zone of less than I hour exposure at a depth chosen to keep the baskets submerged in water at all times. Twice a month the growth of the spats were measured along with the air and water temperature and salinity. The early summer spats, which were $17-240\%$ larger, in size, than the late summer spats at the time of cross-transplantation, grew more slowly than the late summer spats when exposed to identical environmental conditions, shortening the initial gap to a $5-20\%$ level as the first year of the growth phase came to an end in December. The growth of the Kan-Wol-Do spats lagged considerably behind the southern spats at all localities tested, whereas there were no significant differences among the latter groups. This suggests that the morphological differences between southern and western Pacific oysters in Korea are a manifestation of genetic variety and that Pacific oysters cultured along the south coast are of an identical variety as they are commonly believed to be. The seasonal changes in temperature and salinity even during rainy season in both the southern and western coastal areas are well within the range suitable for successful spawning, and spat fall. However, since the results were based on twice-a-month measurements with no data covering the critical period before and after spawning, they can only serve to indicate at best the general pattern of changes in the environmental conditions of each growing area.

• Journal of Distribution Research
• /
• v.16 no.5
• /
• pp.193-209
• /
• 2011

The fast expansion of super supermarket(SSM) in Korean retail industries has attracted serious social attentions and some types of regulations to slow down its growth are prepared. However, the regulations are hardly justified because they attempt to establish entry barriers which are not recommendable economic policy. Accordingly, the regulations should be justified at least on the basis of social and political causes. The study interprets the social and political causes as the effects of entry of SSM on trading ares where SSM is located. The study is distinguished from the past studies which focused only on intertype and intratype competition between retailers Another goal of the study is to complement the weakness of past studies and provide additional information to settle the issues. More closely, the study investigates the relationships between the changes in sales of convenience stores, which may be a surrogate measure of the viability of a local economy, and the changes in the composition of business types within 500m radius of a SSM. Further, the study investigates the effects of the establishment of SSM and the retail sales index on the sales of convenience stores. The study analyzed the panel data and adopts Swamy's random coefficient models. The results show that the effects of the establishment of SSM on the sales of convenience stores are not statistically significant. The relationship between the change in the portion of restaurants among the local business and the change in the sales of convenience stores is positive. On the other hand the relationship between the change in the portion of retailers in the composition of local businesses and the change in the sales of convenience stores is negative. In conclusion, even though any negative effects of the establishments of SSM on local economies are expected, as long as other types business especially restaurant businesses fill the space left by retailers, the net effect on the local economy may not be signification or even positive.

• Journal of Nutrition and Health
• /
• v.3 no.3
• /
• pp.129-135
• /
• 1970

From the previous studies, F-P-4 formula was found to be comparable to full fat dry milk in its nutritive value and feeding performance. However, an attempt was made in order to make sure whether or not any possibility might exist, by which further improvement of nutritive quality and simultaneous reduction of product costs may be achieved. Using F-P-4 as a control, modifications were made in new formulas, F-P-5, F-P-6 and F-P-7 by reducing FPC, eliminating yeast from the mixture, and by enriching with methionine as needed. In particular, F-P-7 is completely free of FPC, hydrogenated oil and yeast. Yet, levels of total protein and fat were kept equal to those of F-P-4 in all formulas. An animal feeding test for all formulas using 10 female rats per group for 8 weeks and an infant feeding trial for F-P-5 and F-P-6 with 5 of each female infants under age of one for one month were conducted along with F-P-4 as a control. Almost the same results were obtained with F-P-4, 5 and 6, but F-P-7 showed the lowest body weight gain. FER of F-P-5 and 6 was 0.20 as was with F-P-4, while that of F-P-7 was 0.16. Acceptability to infants was excellent; growth, appearance and biochemical data were normal. As an example F-P-4 packed in 0.04mm polyethylene bags was used for storage study at $25^{\circ}C$ and relative humidity of $65{\sim}85%$ for 8 months. Although viable bacterial counts and vitamin C contents were reduced, peroxide and TBA values were increased gradually during such storage. Since there are also significant changes in color and organoleptic quality, the expected shelf life under the given conditions is considered to be about 2 months and thus further works are needed both on the product and packaging in order to improve the storage stability. Either elimination of yeast form F-P-4, that is F-P-5, or partial replacement of FPC with methionine, that is F-P-6 may well reduce material costs about 10%. Considering blending process of ingredients, F-P-5 is thus found to be the best formula developed. While F-P-7 free of FPC is inferior in its nutritive quality than that of others, but significantly superior than of rice. Furthermore, the material cost of the product can be reduced about 20% from that of F-P-4. And thus this vegetable blend is considered to be useful as a low cost supplementary food mixture for growing children.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.103-126
• /
• 2010

The development of an industry including distribution sector is influenced by not only government policy but the related firms' behaviors. Recently the large-scale retailers have had more enormous channel power than any other distributors including monopolistic makers. Now is the time for government to prepare some policies against the unfair transaction behaviors by large-scale retailers. In this paper I tried to inquire into the distribution competition policy from a political correspondent point of view related with the transition of distribution system. For the purpose of this article I compared the case of Korea with Japan. According to the results so far inquired, there are some commons and differences in the cases of the two. Some suggestions are as follows. Considering the predominant position the concept of large-scale retailers is to be extended from a single store to numerous chain stores in the political level. Government needs to examine the standard propriety for large-scale retailer; the size of selling area and amount of sales a year. When a large-scale retailer store is to be established, it need to be taken a permit or a pre-inspection. The Fair Trade Commission have to secure the neutrality from Government's strategies. And government should find out the examples of unfair transaction behavior types and prepare some proper guidelines continually. For the last time statistical data by distributors are to be fitted out and the actual investigations for estimating the effects of government policies need to be enforced.

• The Mathematical Education
• /
• v.30 no.1
• /
• pp.1-19
• /
• 1991

This study intends to provide some desirable suggestions for the development of application oriented mathematics curriculum. More specific objects of this study is: 1. To identify the meaning of application and modelling in mathematics curriculm. 2. To illuminate the historical background of and trends in application and modelling in the mathematics curricula. 3. To consider the reasons for including application and modelling in the mathematics curriculum. 4. To find out some implication for developing application oriented mathematics curriculum. The meaning of application and modelling is clarified as follows: If an arbitrary area of extra-mathematical reality is submitted to any kind of treatment which invovles mathematical concepts, methods, results, topics, we shall speak of the process of applying mathemtaics to that area. For the result of the process we shall use the term an application of mathematics. Certain objects, relations between them, and structures belonging to the area under consideration are selected and translated into mathemtaical objects, relation and structures, which are said to represent the original ones. Now, the concept of mathematical model is defined as the collection of mathematical objcets, . relations, structures, and so on, irrespective of what area is being represented by the model and how. And the full process of constructing a mathematical model of a given area is called as modelling, or model-building. During the last few decades an enormous extension of the use of mathemtaics in other disciplines has occurred. Nowadays the concept of a mathematical model is often used and interest has turned to the dynamic interaction between the real world and mathematics, to the process translating a real situation into a mathematical model and vice versa. The continued growing importance of mathematics in everyday practice has not been reflected to the same extent in the teaching and learning of mathematics in school. In particular the world-wide 'New Maths Movement' of the 19608 actually caused a reduction of the importance of application and modelling in mathematics teaching. Eventually, in the 1970s, there was a reaction to the excessive formallism of 'New Maths', and a return in many countries to the importance of application and connections to the reality in mathematics teaching. However, the main emphasis was put on mathematical models. Applicaton and modelling should be part of the mathematics curriculum in order to: 1. Convince students, who lacks visible relevance to their present and future lives, that mathematical activities are worthwhile, and motivate their studies. 2. Assist the acqusition and understanding of mathematical ideas, concepts, methods, theories and provide illustrations and interpretations of them. 3. Prepare students for being able to practice application and modelling as private individuals or as citizens, at present or in the future. 4. Foster in students the ability to utilise mathematics in complex situations. Of these four reasons the first is rather defensive, serving to protect or strengthen the position of mathematics, whereas the last three imply a positive interest in application and modelling for their own sake or for their capacity to improve mathematics teaching. Suggestions, recomendations and implications for developing application oriented mathematics curriculum were made as follows: 1. Many applications and modelling case studies suitable for various levels should be investigated and published for the teacher. 2. Mathematics education both for general and vocational students should encompass application and modelling activities, of a constructive as well as analytical and critical nature. 3. Application and modelling activities should. be introduced in mathematics curriculum through the interdisciplinary integrated approach. 4. What are the central ideas of, and what are less-important topics of application-oriented curriculum should be studied and selected. 5. For any mathematics teacher, application and modelling should form part of pre- and in-service education.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.1-27
• /
• 1970

The process of the forced aging of flue-cured tobacco leaves were studied extensively from various scientific points of view. The Flue-cured tobacco leaves were inoculated and fermented with nicotine resistant Hansenula yeast, or the leaves were subjected under simple forced aging. The above two processes of forced aging were studied from the summarized points of microbiology, physics, chemistry, and biochemistry, and the resulted products ware compared in their physical, chemical and biochemical quality determining factors with that of raw material tobacco leaves (dried-tobacco leaves) and 2 years aged high quality tobacco leaves. The summary results were as follows. 1) The Korean flue-cured tobacco leaves, were forcedly aged under the basic optimum aging condition, temperature $40^{\circ}C$, moisture contents 18%, relative humidity 74%. It was found that this aging condition was the best in bringing the quality of forcedly aged tobacco leaves to the utmost state. 2) Under this optimum temperature and moisture condition of forced aging in about 20 days the forcedly aged tobacco leaves both with yeast inoculation and without yeast inoculation showed the equivalent tobacco qualities comparable with that of more than 2 years aged tobacco leaves. 3) The forcedly aged tobacco leaves both with and without yeast inoculation under $40^{\circ}C$ temperature and $74^{\circ}C$ relative humidity achieved the necessary quality determining physical and chemical changes in about 20 days. 4) The microbial changes during the forced aging were as follows. The population of yeasts and bacteria increased until to 15 days of aging, then decreased thereafter. Whereas the molds grew continously until the end of fermentation. 5) The tobacco quality determing physico-chemico-properties of yeast inoculated aged and simple forcedly aged tobacco leaves, progressed as the follows in time. As the forced aging progresses, swelling and combustibility properties were improved. The pH, total reducing materials, total sugars, alkaloids contents decreased. The contents of organic and ether extractable materials increased. The total nitrogen, protein, crude fiber, ash contents showed no changes. The color properties, excitation purity, luminance, main wave length, showed equivalent changes comparable with that of 2 years aged tobacco leaves. 6) The changes in chemical components in yeast treated and simple forcedly aged tobacco leaves during $15{\sim}20{\;}days$ of forced aging were as follows. The following chemical components decreased as the aging. Sugars-sucrose. rhamnose, glucose. Pigments-chlorophyll, carotenes, xanthophyll and violax anthine. Polyphenols-rutin, chlorogenic and, coffeic acid. Organic acids-iso-butylic, crotonic, caprylic, galacturonic, tartaric, succinic, citric acid. Alkaloids-nicotine, nornicotine. The following components increased as the forced aging progressed. Sugars-frutose, maltose, raffinose. Amino acids-proline, cystine. Organic acids-formic, acetic, propionic, n-butyric, iso-valeric, n-valeric, malic, oxalic, malonic, ${\alpha}-ketoglutaric$, fumaric, glutaric acid. 7) During the forced aging of tobacco Leaves the oxygen-uptake decreased gradually. The enzyme activities of polyphenol oxidase, ${\beta}-amylase$ ${\alpha}-amylase$ decreased gradually. The activities of the enzymes, catalase, and invertase increased once then decreased at the later stage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.1-4
• /
• 1970

To study the varital response of grain, protein and oil yield to different sowing dates and calcium levels in soybean, the most important crop as a protein source in Korea, this experiment was conducted in 1969. Three leading soybean varieties (Choongbukbaek, Ryooku＃3 and Changdanbaekmok) were sown at May 22,, June 11 and July 1 under 3 different calcium levels, 0.50 and 100kg per 10a respectively. The results are summarized as follows: 1. Ryonku ＃3 showed the highest grain yield because of the highest number of pods per hill. In order of protein content, and oil content of grain, Choongbukbaek>Ryooku＃3>Changdanbaekmok and Changdanbaekmok>Choogbukbaek>Ryooku＃3 were found. Ryooku＃3 also showed the highest protein and oil production per unit area owing to the highest grain yield. However. varietal differences of the grain yield the protein and the oil production per unit area varied along the different sowing dates. Interactions between varieties and sowing date on the grain yield should be considered in practice. 2. No difference in the grain yield was found between the first sowing date (May22) and the second (June11) on average. The grain yield in the plot of the third sowing date (July l)was strikingly decreased mainly by the smaller number of pods per hill. The protein and the oil content were not varied significantly by the different sowing dates. The protein and oil production per unit area were lowest in the plot of the third sowing date owing to the decreased grain yield. 3. More calcium application increased the number of branches per hill, the number of pods per hill, and the grain yield. The highest grain yield was found in the plot received 100 kg of calcium hydroxide per 10are. Protein content increased in higher calcium level, but oil content was highest in the plot of noncalcium. More protein production per unit area was gotten by more calcium application because of higher grain yield and protein content. all production increased in higher calcium level by the increased grain yield. 4. High plus (+) correlation was found between stem length and stem weight per hill stem length and grain weight, stem length and grain yield, stem weight per hill and number of pods per hill and grain weight, number of branches per hill and grain weight, number of pods per hill and grain yield, and grain weight and protein content of grain. Minus(-) correlation was recognized between number of pods per hill and grain weight.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.47-50
• /
• 1970

There are many factors affecting the development of sericultural industry in Korea. The setting of a rational pricing system for sericultural products is one of important activities of the Korean Government to improve the incentives to producers. The determination o： the prices for many years were based on the production costs including a certain level of profits. Some of cost items are in conflict both in cocoon producers and silk-reeling industries. Government officials have to evaluate these conflicting problems and estimate the consequences of their decisions. In this situation the final decision often became political decisions. This analysis is aimed at providing an alternative method of setting the prices of sericultural products. The criteria of the equilibrium employed in this analysis are based on economic principle which equilibrium condition is determined by the relationships between the marginal productivity of input factors and factor prices. In order to obtain the related information Cobb-Douglas'functions were fitted using KIST computer and data were obtained mostly from the Bank of Korea and the Ministry of Agriculture and Forestru, An important assumption is that "Opportunity Costs" of factors input in both cocoon production and silk-Peeling industries are same, The major finding s obtained are as followings. 1) The sum of coefficient of production elastisity in silk-reeling industries is greater than one. Silk-reeling industries are operating under the situation of increasing return to scale and it is, therefore, expected to develop the industries as the capital-intensive large scale. 2) The cocoon producing farmers are under the situations of the decreasing return to scale and it is expected to continue their cocoon farming as the labor-intensive small scale, assuming the present level of production technology. As the development of commercial farming, the resources input in cocoon production will be shifted to the production for higher profitable crops, 3) The price elastisity of production is higher in cocoon production than in silk-reeling industries. It is expected that the price changing effects on domestic production will be resulted from cocoon producers. 4) Based on analysis results of marginal productivities and the opportunity costs of resources, cocoon price for meeting equilibrium price condition is to be increased by 8-16 percent or standard price level of silk increased by 6-8 percent. There were the possibilities of over evaluation on opportunity cost of resources input in silk-reeling industries, or income transfered from the farmers to the industries. It is recommended that the prices for meeting equilibrium price conditions are to be determined by 72 percent for cocoon and 28 percent for silk-reeling costs, based on standard level of the exporting prices.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.21-36
• /
• 1970

This studies have been carried out to 3nd various causes of cleanness defects on raw silk which has been increased since 1967 in Korea, so that this treatise may be a guide inform action to improve such a defect in future. The cocoon treatment for the proposed work was carried starting with in worst condition to find the critical limit of degrading through such a work. And various analysis have been also worked out using the annual silk testing data past a few years. The results obtained are as follows. 1. There was a great relationship between cleanness and neatness result. 2. Cleanness result is greatly influenced by mounting conditions and handling of cocoons, which brought 40 percent lower as cleanness result than standard ones in which caused minor defects, especially loops and split ends, so the bad mounting conditions and handling of fresh cocoons degraded raw silk from 4A grade to E. 3. The use of good water quality brought the difference of 1.04 percent in cleanness result rather than the use of bad one. 4. Well technical work brought the difference of 0.86 percent in cleanness result rather than poor technical work. 5, Satisfactory cocoon drying installation brought the difference of 1.97 percent in cleanness result rather than insufficient one. 6. Automatic reeling machine marked lower 1,55 percent in cleanness result than multi-end reeling machine. 7. The degrading of cleanness result from 1965 year silk to 1969 year silk marked 1.99 percent, which almost responds to the degrading rate from good to poor cocoon drying installed cleanness results. In view of this result, nowadays, insufficient cocoon drying installation may be main factor to be worse cleanness result of Korean raw silk. 8. The factors of cleanness defect in raw silk once supplied with cocoon into factory are water quality, technique evaluation, cocoon drying capacity and s： reeling machine. The relationship between cleanness result and above factors are as follows. cleanness result＝neatness result＋1.6－1.04(1－a)－1.97(1－b)－0.86(1-c)＋1.55${\times}$d a： The successive we ratio of water quality (0\longrightarrowl) b： The successive ratio of satisfactory cocoon drying installation (0\longrightarrowl) c： The successive ratio of well technical work (0\longrightarrowl) d： 1 in case multi-end reeling machine o in case automatic reeling machine 9, It is not admitted that there is heavy relationship between cleanness occurrence and nonbreaking reel ability. That mal$.$ be sowed with silk reeling technique. 10. The bad mounting conditions caused the worse result on the cocoon quality as much as cleanness. 11. Besides mounting conditions, there may be another factors affecting on the low reel ability of cocoons in Korea.

• Journal of the Korean Geographical Society
• /
• v.31 no.4
• /
• pp.662-671
• /
• 1996

Since the world's economic and political structures have changed, the term 'globlization' has shown up as a dominant power and as a necessity for regional and national development. Each nation is responding to the globalization process economically and politically in various ways. In general, however, the economic response to the globalization is economic restructuring from the Fordist industries to 'flexible specialization'. And the political response to the globalization is 'global localization' as a new type of local politics(i.e., local policy activism or growth-enhancing local development policies). The crisis of Fordism shifted the role of local governments towards more involovement with local economic development. Local governments are mobilizing for loca economic development, they are taken into a process of institutional change that tends to redefine their responsibilities inside the state. Local governments thus tend to act as an entrepreneur in order to restructure theiir local economies and to compete with other national and international regions. State restructuring towards enerepreneurialism and efficient regional policy pursuing a pro-growth coalition trategy is chosen as a new mode of regulation for the post-Fordism at the local level. The flexible specialization as the post-Fordist economy and the local government as an entrepreneur are the global choice for globalization and a post-Fordist society. The paper focuses on the regulation theory which comprises the political economic perspective on resturcturing. Economic restructuring and state restructuring will be discussed in detail. And the paper tries to combine the economic globalization and the global localization as economic and political responses to globalization.