• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.538-542
• /
• 2005

The structural and microwave dielectric properties of $0.7Mg_4Ta_2O_9-0.3SrTiO_3$ ceramics with sintering temperature were investigated. All the sample of the $0.7Mg_4Ta_2O_9-0.3SrTiO_3$ ceramics were prepared by conventional miked oxide method and the sintering temperature was $1425\~1500^{\circ}C$. The hexagonal phase of $Mg_4Ta_2O_9$ and the cubic phase of $SrTiO_3$ were coexisted. The porosity of $0.7Mg_4Ta_2O_9-0.3SrTiO_3$ ceramics were reduced with increasing sintering temperature. In the case of $0.7Mg_4Ta_2O_9-0.3SrTiO_3$ ceramics sintered at $1475^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency were 14.51, 82,596 GHz and $-3.14\;ppm/^{\circ}C$, respectively.

• 한국통신학회논문지
• /
• 제18권8호
• /
• pp.1169-1175
• /
• 1993

레이다의 추적 및 탐색으로 부터 비행 물체를 보호하기 위한 목적으로, 알루미늄 합금표면에 페라이트-탄화규소 복합물인 마이크로파 흡수층을 플라즈마 용사방식으로 제작하였다. 본 논문에서는 페라이트-탄화규소층(I) 제조시 사용했던 탄화규소 입자의 평균크기인 34[rm]대신에15[rm]가 사용되었으며, 플라즈마 용사변수들 중에서 분말의 공급비율은 70[Kg/h]대신에 50[Kg/h] 그리고, 용사거리는 80[mm[ 대신에 100[mm]가 사용 되었다. X-band(8~12.4(GHz)레이다용 페라이트-탄화규소 전자파 흡수체를 실험적으로 설계하고 시험제작하여 전기적 특성을 평가한 결과, -lOdB의 반사량을 허용한도로 했을 때 약 2.8%의 대역폭이 얻어졌으며, 최대 흡수두께는 0.5(mm)로 매우 양호한 박층형 전자파 흡수체가 얻어졌다.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.289-294
• /
• 2010

For the aim of low-temperature co-fired ceramic microwave components, sintering behavior and microwave properties (dielectric constant ${\varepsilon}_r$, quality factor Q, and temperature coefficient of resonant frequency ${\tau}_f$) are investigated in $Bi_{18}O(Ca_{0.725}Zn_{0.275})_8Nb_{12}O_{65}$ [BCZN] ceramics with addition of $V_2O_5$. The specimens are prepared by conventional ceramic processing technique. As the main result, it is demonstrated that the additives ($V_2O_5$) show the effect of lowering of sintering temperature and improvement of microwave properties at the optimum additive content. The addition of 0.25 wt% $V_2O_5$ lowers the sintering temperature to $890^{\circ}C$ utilizing liquidphase sintering and show the microwave dielectric properties (dielectric constant ${\varepsilon}_r$ = 75, quality factor $Q{\times}f$ = 572 GHz, temperature coefficient of resonance frequency ${\tau}_f\;=\;-10\;ppm/^{\circ}C$). The estimated microwave dielectric properties with $V_2O_5$ addition (increase of ${\varepsilon}_r$, decrease of $Q{\times}f$, shift of ${\tau}_f$ to negative values) can be explained by the observed microstrucure (sintered density, abnormal grain structure) and possibly high-permittivity $Bi_{18}Zn_8Nb_{12}O_{65}$ (BZN) phase determined by X-ray diffraction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.101-103
• /
• 2003

The $ZnNb_2O_6$ ceramics with 5wt% CuO and $B_2O_3$(1,3,5wt%) were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $950^{\circ}C{\sim}1025^{\circ}C$ for 3hr. in air. The structural properties were investigated with sintering temperature and $B_2O_3$ addition by XRD and SEM. Also, the microwave dielectric properties were investigated with sintering temperature and $B_2O_3$ addition. Increasing the sintering temperature, the peak of second phase ($Cu_3Nb_2O_6$) was increased. But no significant difference was observed as the $B_2O_3$ addition, In the $ZnNb_2O_6$ ceramics with 5wt% CuO and 5wt% $B_2O_3$ sintered at $975^{\circ}C$ for 3hr, the dielectric constant, quality factor, temperature coefficient of the resonant frequency were 19.30, 14,662GHz, $+4.18ppm/^{\circ}C$, respectively.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.69-75
• /
• 1999

Intending to develop a new rubber curing process using only microwave, the both the characteristics of cure and the mechanical properties of rubbers for the tire tread, for which a green styrene-butadiene compounds had been cured with 2.45 GHz microwave, have been compared with those of the custom thermal cured rubber. The unintentional hot spot formation in the compound during the microwave curing has not found where the compound has a microwave absorbing ceramic powders in 4.18 weight percents and the supplying voltage has been adjusted to 90 volts. The new microwave process accomplished preheating to 418K in a quarter of the thermal cure time. The average tensile strength of the microwave-cured rubber indicating $190kg/cm^3$ was compatible to that of the thermal cure. In conclusion, the new microwave cure had approved to be applicable in a commercial plant.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.476-479
• /
• 2001

The microwave dielectric properties of $[(Pb_{1-x}Ba_{x})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ ceramics were investigated. When $[(Pb_{0.9}Ba_{0.1})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ ceramics were sintered at $1250^{\circ}C$ and $1350^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon_{r}=64\sim80$, $Q{\times}f=11,800\sim18,000$. As a result, $[(Pb_{0.9}Ba_{0.1})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ having $\varepsilon_{r}=80$, $Q{\times}f=11,800$ (at 4 GHz) was developed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.476-479
• /
• 2001

The microwave dielectric properties of [(Pb$_{1-x}$ Ba$_{x}$)$_{1}$2/La$_{1}$2/](Mg$_{1}$2/Nb$_{1}$2/)O$_3$ ceramics were investigated. When [(Pb$_{0.9}$Ba$_{0.1}$)$_{1}$2/La$_{1}$2/](Mg$_{1}$2/Nb$_{1}$2/)O$_3$ ceramics were sintered at 125$0^{\circ}C$ and 135$0^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon$$_{r}$=64~80, Qxf=11,800~18,000. As a result, [(Pb$_{0.9}$Ba$_{0.1}$)$_{1}$2/La$_{1}$2/](Mg$_{1}$2/Nb$_{1}$2/)O$_3$ having $\varepsilon$$_{r}$=80, Qxf=11,800 (at 4 GHz) was developed.ed.eveloped.ed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.94-96
• /
• 2002

The $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%) were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by XRD and SEM. According to the X-ray diffraction patterns of the $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), the ilmenite $MgTiO_3$ and perovskite $SrTiO_3$ structures were coexisted and secondary phase $MgTi_2O_5$ were appeared. Increasing the sintering temperature. the grain size was increased. In the case of $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), dielectric constant, quality factor and temperature coefficient of resonant frequency were $13.52{\sim}18.13,\;32750{\sim}51736GHz$, $-15.78{\sim}25.64ppm/^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.995-1004
• /
• 1994

Phase relation and microwave dielectric properties of the system BaO.(Nd1-xSmx)2O3.TiO2 (n=4, 5) were studied. With n=5 (1 : 1 : 5), Ba2Ti9O20 and TiO2 formed in case of X$\leq$0.7, and Ba2Ti9O20 and Sm2Ti2O7 formed at X=1.0 as the second phases dispersed in fine-grained orthorhombic matrix phase. With n=4 (1 : 1 : 4). on the contrary, only fine grains of an ortho-rhombic phase were observed irrespective of Nd/Sm ratio. The compositions of these two stable orthorombic phases having distinct lattic constants even with the same Nd/Sm ratio were estimated as 4BaO.5(Nd1-xSmx)2O3.18TiO2 and BaO.(Nd1-xSmx)2O3.4TiO2 with n=5 and n=4 in the system BaO.(Nd1-xSmx)2O3.TiO2, respectively. Consequently the composition BaO.(Nd1-xSmx)2O3.5TiO2 lies in the compatible triangle of 4BaO.5(Nd1-xSmx)2O3.18TiO2 and the second phases mentioned above. The microwave dielectric properties (~4 GHz) of BaO.(Nd1-xSmx)2O3.5TiO2 can be controlled effectively by adjusting Sm content : with increasing X from 0 to 0.7, both dielectric constant and the temperature coefficient of resonant frequency decreased monotonically from 82 to 65 and from 91 (ppm/$^{\circ}C$) to -19(ppm/$^{\circ}C$), respectively, while unloaded Q(Qo) remained constant at about 2,600.

• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.11-18
• /
• 2021

(1-x)BaWO₄-xBaV₂O₆(x=0.54~0.85) 조성의 새로운 초저온 동시 소성 세라믹(ULTCC)용 마이크로파 유전체 복합 재료를 BaWO₄와 BaV₂O₆의 혼합물을 소성하여 제조되었다. 수축 시험은 세라믹 복합재가 BaV₂O₆의 영향으로 500℃의 낮은 온도에서 치밀화가 시작되며, 650℃에서 상대밀도 98%로 소결될 수 있음을 보였다. X-선 회절 분석은 복합체는 BaWO₄와 BaV₂O₆이 공존하고 소결체에서 2차상이 검출되지 않음을 보였다. 이는 두 상이 서로 우수한 화학적 안정성이 있음을 의미하였다. 거의 0에 가까운 공진 주파수 온도계수(𝛕_f)는 복합체에 존재하는 두 상의 𝛕_f 값이 각각 양(+) 및 음(-)의 값임에 따라 두 상의 상대적 함량을 조절하여 얻을 수 있었다. BaV₂O₆의 함량이 x=0.53에서 0.85로 증가함에 따라 복합 재료의 𝛕_f 값은 7.54에서 14.49 ppm/℃로 증가하였고 ε_r은 10.08에서 11.17로 증가했으며 Q×f값은 47,661에서 37,131 GHz로 감소하였다. 최고의 마이크로파 유전 특성은 BaV₂O₆의 함량이 x=0.6 일 때, ε_r=10.4, Q×f=44,090 GHz 및 𝛕_f=-2.38 ppm/℃값을 얻을 수 있었다. 화학적 호환성 실험은 개발된 복합 재료가 동시 소성 과정에서 알루미늄 전극과 반응성이 없음을 보여주었다.