• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1107-1115
• /
• 2012

This paper presents the development processes of a microwave radiometer for remote sensing of water surface temperature. Achieving the measurement accuracy within $2^{\circ}C$ for water surface temperature of $5{\sim}30^{\circ}C$, the requirements and specifications of the microwave radiometer and its receiver are drawn. The receiver with high gain, high sensitivity is designed and implemented. The receiver has the bandwidth of 50 MHz, the system gain of 45.2 dB and the sensitivity of 0.56K at 5.02 GHz. The effectiveness of the developed microwave radiometer in the measurement of water surface temperature is demonstrated experimentally. The results show the microwave radiometer can detect water surface temperature for $7.5{\sim}18^{\circ}C$ within the accuracy of $0.45^{\circ}C$.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.224-227
• /
• 2007

마이크로파 센서 자료를 이용하여 태풍 강도를 산출하고자 TRMM TMI로부터 관측된 자료와 태풍 강도의 최대 상관성을 나타내는 지역올 찾고 최적의 상관 변수를 선정하였다. 분석기간은 2004년 6월부터 9월까지 발생된 태풍으로써 18개의 사례이다. TMI로부터 관측된 85 GHz 채널의 밝기온도，구름내 총 수증기량，얼음양，강우 강도，잠열방출양이 태풍 강도와의 상관성 분석을 위한 변수로 분석되었다. 태풍의 강도는 RSMC-Tokyo에서 발표된 Best track의 최대 풍속 자료를 이용하였다. 위성 관측 변수를 태풍 중심으로부터 공간 평균하였을 때 반경 2.0-2.5도 정도의 평균거리에서 최대의 상관성을 보였다. 위성 자료로부터 태풍 중심 풍속을 추정하기 위하여 회귀분석을 하였다. Best track과의 오차는 85 GHz 밝기온도와 수증기량을 이용한 다중 회귀 분석에서 오차가 최소를 보였다. 한편， 태풍강도 예측을 위한 통계모델에 마이크로파 위성 자료를 예측인자로 입력하여 태풍강도의 정확도가 3-6%정도 향상됨을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.998-1004
• /
• 2003

With starting materials of two different powder mixtures, $Al_2$(S $O_4$)$_3$+xNa$_2$B$_4$ $O_{7}$$.$10$H_2O$(㏖ ratio; x=0.1, 0.7) and ${\gamma}$-Al$_2$ $O_3$+xNa$_2$B$_4$ $O_{7}$$.$10$H_2O$(㏖ ratio; x=0.1, 0.7), whisker-type $Al_{18}$B$_4$ $O_{33}$ particles were synthesized by using conventional and microwave heat-treatment. The effects of microwave, amount of flux and temperature on the growth of whisker-type $Al_{18}$B$_4$ $O_{33}$ particles were investigated by using X-Ray Diffractometry (XRD) and Scanning Electron Microscopy (SEM). With increase of heat-treatment temperature and amount of flux, the size of whisker-type $Al_{18}$B$_4$ $O_{33}$ particles increased in both conventional and microwave heat-treated samples. However, compared to the conventional heat-treated samples, whisker-type $Al_{18}$B$_4$ $O_{33}$ particles were well grown for the microwave heat-treated samples.ted samples.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1142-1149
• /
• 2007

In this paper, the development of wideband MIMO channel sounder and a pilot measurement result is described for research on the multi antenna radio propagation characteristics considering urban environment at microwave frequencies. We developed $4{\times}4$ MIMO(BW:100 MHz) channel sounder using the high speed switching mechanism and periodic pseudo random binary signals method considering next generation mobile communication system. A pilot measurement campaign at the urban area of Bundang is presented for confirmation of system performance. From the analysis of measurement data, wideband path loss exponent of 3.7 and 8 GHz band is 1.79 and 1.76. Average RMS delay spread is 200 ns and 42 ns respectively. From the experiment results, operation of this measurement system is confirmed considering research for a coverage, SNR and channel capacity in urban environment at microwave frequencies.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.59-64
• /
• 2008

In this paper an adjustable linear gain equalizer which is operated from 6GHz to 18GHz in order to apply wideband RF circuit System is proposed and fabricated on $Al_2O_3$ substrate using thin film process. An adjustable linear gain equalizer is proposed to T type circuit and designed to aim on variable slope $-7dB{\sim}-13dB$ using the PIN Diode

• Composites Research
• /
• v.16 no.2
• /
• pp.48-53
• /
• 2003

This paper presents a study on the permittivities of the I-glass fabric/epoxy composite laminates containing carbon black dispersions at microwave frequency. Measurements were performed at the frequency band of 5 GHz∼18 GHz. The results showed that the complex permittivities of the composites depend strongly on the natures and concentrations of the carbon black dispersion. A new scheme is proposed to obtain a mixing law for the estimation of the complex permittivities of the composite laminates as a function of concentration of carbon black. Simultaneously, the complex permittivity of carbon black itself was also calculated by the scheme. The experimental values of the complex permittivities of the composites were compared to those calculated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1165-1171
• /
• 2020

In this study, we designed a single antenna taking into account the performance, such as return loss and radiation pattern, of 28 GHz and 38 GHz array antennas for 5G mobile devices. In millimeter wave band communication, high path loss occurs between transmission and reception, unlike in conventional microwave bands. In the design of array antennas for 5G millimeter wave terminals, antenna performance such as antenna gain, bandwidth, isolation between antenna elements, side-lobe level(SLL), etc. should be further considered. The performance of the designed array antennas was analyzed by spacing the antenna elements at half a wavelength. Our results proved the validity of the design and its suitability for applications in mm-Wave by showing that the 28 GHz and 39 GHz array antennas had antenna gains of 13.5 dBi and 11.3 dBi and return losses below -18.4 dB and -20 dB, correspondingly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.522-529
• /
• 2007

A semidynamic frequency divide-by-1.5 MMIC comprises a tunable polyphase filter, tunable image-rejection mixer, and a static divide-by-2 in the feedback path. Wideband suppression of unwanted tones is achieved by employing a tunable image-rejection mixer and a tunable single-stage polyphase filter. Implemented in GaInP/GaAs HBT technology, the divide-by-1.5 MMIC operates over the input frequency range of 4.5 to 9.2 GHz with better than -20 dBc suppressions of $1/3{\times}f_{in}\;and\;f_{in}$ tones, while dissipating 29 mA from 4.1 V supply.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.364-369
• /
• 2012

This paper presents an experimental study on the radio propagation characteristics in subway tunnel at 18GHz frequency band which has been assigned to video transmission between train and wayside. The radio propagation tests are carried out in the subway tunnel of Seoul Metro using the antenna and communication devices of the prototype video transmission system. The measurement results show that 18GHz radio propagation in subway tunnel has smaller path loss than that of general outdoor radio environment. It is also cleared that the arch-type tunnels have smaller radio propagation losses than rectangular tunnels, and single track tunnels have smaller pass loss than double track tunnels. From the measurements, the radio propagation coverage is worked out as 520 meters. The curved tunnels which cannot have LOS communication between transmitter and receiver have large pass losses and fluctuation profile along distance. The radio propagation coverage along curved tunnels is worked out as 300 meters. These investigation results can be used to design the 18GHz radio transmission system for subway tunnel by providing the optimized wayside transmitter locations and handover algorithm customized to the radio propagation characteristics in subway tunnels.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.6
• /
• pp.23-29
• /
• 1981

By using a slot-line in combination with microstrip lines, a coplanar wide-band balun is designed and fabricated. The slot-line of balun junction is compensated to be operated in C-band(4~8GHz), and therefore the results are agreement with theoritical prediction. Experimental data are given for a 3-section Chebyshev transformer-matched balun with a balanced-to-unbalanced line impedance ratio of 2 : 1. A bandwidth from 3.5GHz to 7.0GHz is obtained with V.S.W.R. of below 1.2 : 1. Maximum insertion loss is measured as 0.9dB, and the phase difference varies linearlly within 180$^{\circ}$$\pm$5$^{\circ}$.