• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1132-1140
• /
• 1996

In video coding systems, an effective rate control method is one of the most improtant issues for the good video quality. This paper presents an adaptive rate control scheme based on the buffer fullness, quantization, and buffer utilization for very low bit rate communication lines, such as 16kbit/s, 24bit/s, and so on. The strategy is implemented on H.263, whichis a vide coding algorithm for narrow band telecommunication channels up to 64kbit/s recommended by ITU-T SG15, to show the effectiveness. The simulation result shows that the suggested rate control scheme has better SNR performance and buffer utilization of source coder than those of linear and non-linear[9] buffer control strategies.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.671-672
• /
• 2006

Recently Communication with using IrDA is bing used in various fields. In this paper I designed a receiver by fabricating hardware that used to be fabricated through software, so anyone who don't have knowledge on IrDA can receive Ir Signal easily. This receiver can communicate with CPU through 8 bit data and 3 bit address. Also this receiver can use user-needed CLK because this receiver embodied 16 bit CLK Prescaler.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.41-48
• /
• 2001

The exact general bit error rate (TIER) expression of M-ary square quadrature amplitude modulation (QAM) for arbitrary M has not been derived so far. In this paper, a generalized closed-form expression for the BER performance of M-ary square QAM with Gray code bit mapping is derived and analyzed in the presence of additive white Gaussian noise (AWGN) channel. The derivation is based on the consistency of the format in signal constellation o[ Gray coding and it has been derived from the results for M-16, 64, and 256.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2020

IoT has been consistently used in various fields such as smart home, wearables, and healthcare. Since IoT devices are small terminals, relatively simple wireless communication protocols such as IEEE 802.15.4 and ISO 18000 series are used. In this paper, we designed the 802.15.4q 2.4 GHz TASK physical layer. Physical protocol data unit of TASK supports bit-level interleaving and shortened BCH encoding. It is spread by unique ternary sequences. There are four spreading factors to choose the data rate according to the communication channel environment. The TASK physical layer was designed using verilog-HDL and verified through the loop-back test of the transceiver. The designed TASK physical layer was implemented in a fpga and tested using MAXIM RFICs. The PER was about 0% at 10 dB SNR. It is expected to be used in small, low power IoT applications.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.31-40
• /
• 2016

In this paper, we propose a new anti-forensic method for hiding data in the timestamp of a file in the Windows NTFS filesystem. The main idea of the proposed method is to utilize the 16 least significant bits of the 64 bits in the timestamps. The 64-bit timestamp format represents a number of 100-nanosecond intervals, which are small enough to appear in less than a second, and are not commonly displayed with full precision in the Windows Explorer window or the file browsers of forensic tools. This allows them to be manipulated for other purposes. Every file has $STANDARD_INFORMATION and $FILE_NAME attributes, and each attribute has four timestamps respectively, so we can use 16 bytes to hide data. Without any changes in an original timestamp of "year-month-day hour:min:sec" format, we intentionally put manipulated data into the 16 least significant bits, making the existence of the hidden data in the timestamps difficult to uncover or detect. We demonstrated the applicability and feasibility of the proposed method with a test case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.246-252
• /
• 2012

STBC is a technique where a multiple antenna signals are transmitted. With this technique, antenna diversity can be achieved. The performance of STBC OFDM system using pilot symbol for the channel estimation is analyzed. IEEE 802.16e standards suggest that the BER performance of STBC system can be improved using channel state information. Pilot symbol is used for the channel estimation in OFDM systems. However, imperfect channel estimates in this systems degrade the performance. The performance of this STBC OFDM systems using channel state information, gauged by the average bit error rate, is analyzed considering the channel estimation error.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.855-865
• /
• 1999

This paper presents the improvement of BER performance using fading compensation method for 16 QAM-TCM to reduce the effects of multi-path fading in mobile radio environments. We propose the multi-pilot symbol aided fading compensation technique using Gausian interpolation method for inter-symbol interference or fading distortion occured in frequency selective fading channel. The proposed system is combined coding and modulation scheme for improving the reliability of a digital transmission system without increasing the transmitted power or the required bandwidth. In the fading compensation, the pilot symbols from a known sequence is multiplexed into the data symbols at regular intervals to from a frames for transmission. And we use a modified bit reversal block interleaver to randomize burst errors. The results show that significant improvements in the bit-error rate performances can be achieved by the proposed techniques.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1065-1074
• /
• 2008

T-DMB(Terrestrial Digital Multimedia Broadcasting) system, is based on the Eureka-147 standard, provides various multimedia data services. However T-DMB system needs upgrades for more various services and better services. Therefore, we proposed advanced T-DMB system using unequal error protection system and hierarchical modulation in this paper while maintaing backward compatibility. And we simulated various bit split methods and double binary turbo code of DVB-RCS standard as method of LP data stream for additional service of advanced T-DMB. As the simulation results, double binary turbo code of proposed advanced T-DMB system have each coding gain of over 2 dB compared to conventional T-DMB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.189-196
• /
• 2012

A WAVE(Wireless Access for Vehicular Environment) system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. However, the scrambler bit operation of WAVE system becomes less efficient in the organizations of software and hardware design because the parallel processing is impossible. Although scrambler algorithm proposed in this paper has different processing speed depending on input data 8 bit, 16 bit, 32 bit, and 64 bit. it improves the processing speed of the operation because it can make parallel processing possible depending on the input unit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.259-265
• /
• 2012

Recently, many research works are focusing on DVC (Distributed Video Coding) system for low complexity encoder. Most DVC systems need feedback channel for parity bit control to achieve the good RD performances, however, this causes the system to have high decoding latency and is considered as one of the most critical problems for real implementation. In order to overcome this problem, this paper proposes an effective distributed video decoding method using adaptive LDPCA frame-based parity bit request estimation. The proposed method applies for the pixel-domain Wyner-Ziv system and exploits the statistical characteristics between adjacent LDPCA frames to estimate adaptively the parity bit request. Through computer simulations, it is shown that the proposed method achieves about 80% of latency reduction compared to the conventional no-estimation DVC system.