• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.957-966
• /
• 1994

The transformation of butanes and 1-butene into aromatic compounds was performed over HZSM-5 catalyst and its Ag ion-exchanged form. The yield of aromatic hydrocarbons appreciably increased by incorporating silver cations into HZSM-5. The silver cations serve as catalysts for dehydrogenation of the starting hydrocarbons. $Ag^+$ ions could be reduced to $Ag^0$ metals with resulting in the formation of acidic OH grops by hydrogen produced during the dehydrogenation of butanes and 1-butene. The reaction of 1-butene over ZSM-5 with different loading of Ag was carried out to investigate the effect of acidic properties of these catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.304-308
• /
• 1986

When the two conjugated poly-ynes, 1-phenyl-6-methyl- and 1,6-diphenyl-1,3,5-hexatriynes, were irradiated with UVA in deaerated 2,3-dimethyl-2-butene solution, 1:2 photoadducts, 1-(1'-phenylethynyl-2',2',3',3'-tetramethylcyclopr opyl)-2-(l",2",2",3",3"-pentamethylcyclopropyl) acetylene and 1-(1'-phenylethynyl-2',2',3',3'-tetramethylcyclopr opyl)-2-(1"-phenyl-2",2",3",3"-tetramethylcyclopropyl) acetylene, were obtained, respectively. No photoadduct was formed with aerated 2,3-dimethyl-2-butene, or deaerated solutions of dimethyl fumarate, methyl crotonate, dimethyl maleate, and trans-1,2-dichloroethylene. The results suggest that the reactions proceed from the triplet state only with electron rich olefins such as 2,3-dimethyl-2-butene.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.3
• /
• pp.153-157
• /
• 1985

A diacetylene compound, 1,4-diphenyl-1,3-butadiyne, was photolyzed with 2,3-dimethyl-2-butene, 1,4-cyclohexadiene, dimethyl fumarate, and methyl crotonate, as a model reaction of the phototoxic conjugated polyynes with DNA or RNA and [2 + 2] photocycloadducts were obtained except for 1,4-cyclohexadiene. In the photoreaction of 1,4-diphenyl-1,3-butadiyne with 2,3-dimethyl-2-butene, a [2 + 2 + 2] photoadduct was additionally obtained. The photolysis of 1,4-di-t-buyl-1,3-butadiyne with 2,3-dimethyl-2-butene also yielded a [2 + 2] photoadduct. Fluorescence was observed from all the photoadducts while the reactants did not show any fluorescence.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.128-132
• /
• 1963

A study has been made on the applicability of gas-liquid partition chromatography to the qualitative and quantitative analysis of complex mixture of gaseous hydrocarbons. While phthalate columns are widely used for this $purpose^9$, they separates neither saturated hydrocarbons from the unsaturated nor n-butane from isobutene or butene-1, therefore combined columns such as phthalate and dimethylsulfolane have been used for the perfect separation of gaseous hydrocarbons. It is shown by this study, however, that hydrocarbons having $C_1$ through $C_4$ can be separated with a 2-meters tetraethyleneglycol dimethylether column except ethane from ethylene, and trans-from cis-2-butene especially operated at $15^{\circ}C$$ using helium as the carrier gas. The column effluents were in order of methane, (ethane, ethylene), propane, propylene, isobutane, n-butane, isobutylene, butene-1, (trans-& cis-2-butene, isopentane), (butadiene-1, 3, n-pentane). Two kinds of liquified petroleum gases in market are analysed qualitatively and quantitatively. The results indicate that use of this 2-meters TEGDE column permits the separation and identification of all the commonly encountered aliphatic gaseous hydrocarbons.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.391-396
• /
• 2015

To investigate the effect of the catalyst synthesis method on the oxidative dehydrogenation (ODH) of nbutenes, $BiFe_{0.65}MoP_{0.1}$ oxide catalysts were prepared with various synthesis methods such as co-precipitation, citric acid method, hydrothermal method, and surfactant templated method. The catalysts were characterized by X-ray Diffraction (XRD), $N_2$ sorption, and $NH_3/1$-butene-temperature programmed desorption ($NH_3/1$-butene-TPD) to correlate with catalytic activity in ODH reaction. Among the catalysts studied here, $BiFe_{0.65}MoP_{0.1}$ oxide catalyst prepared with co-precipitation method marked the highest activity showing 1-butene conversion, 79.5%, butadiene selectivity, 85.1% and yield, 67.7% after reaction for 14 h. From the result of $NH_3$-TPD, the catalytic activity is closely related to the acidity of the $BiFe_{0.65}MoP_{0.1}$-x oxide catalyst and acidity of the $BiFe_{0.65}MoP_{0.1}$ oxde catalyst prepared with co-precipitation method was higher than that of other catalysts. In addition, combined with the 1-butene TPD, the higher catalytic activity is closely related to the amount of weakly adsorbed intermediate (< $200^{\circ}C$) and the desorbing temperature of strongly adsorbed intermediates (> $200^{\circ}C$).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.109-117
• /
• 2004

We synthesized energetic prepolymer(2-nitrato ethyl oxirane, NEO) for plastic-bonded explosive and measured its thermodynamic parameters. 2-Nitrato ethyl oxirane(NEO) as a monomer was synthesized from 4-butene-ol, the first-step was preparation of 1-nitrate-3-butene and second-step was synthesized 2-nitrate-ethyl oxirane from 1nitrate-3-butene and then polymerized by cationic ring opening polymerization. The unreacted monomer concentration was measured by GC. The thermodynamic parameters were obtained from the ceiling temperature(Tc) values of 1 mole monomer at each reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of perpolymer(NEO). Number average molecular weight(Mn), polydispersity(PD), and glass transition temperature(Tg), viscosity of prepolymer(NEO) were 2000, 1.07, $-55^{\circ}C$ and 300 poise respectively.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.110-117
• /
• 1987

For the preparation of linear low density polyethylene (LLDPE), the copolymerization of ethylene and 1-butene was carried out with various catalysts of titanium alkoxidealkylaluminum compound in slurry phase. The effects of catalyst components, aging time, concentration of catalyst components, polymerization time and temperature on the catalytic activity and copolymer composition were examined. The properties of copolymer obtained were also considered with the correlation to the 1-butene contents. It has been found that the titanium tetra-n-butoxide-diethylaluminum chloride catalyst system was the most suitable for the production of LLDPE with higher catalytic activity, more 1-butene content and less soluble parts. The density, glass transition temperature, melting point and heat of fusion of copolymer were decreased with increasing 1-butene contents.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.378.2-378.2
• /
• 2002

Phellinus linteus has been used as anti-tumor and immuno stimulating agents in folk remedies. From precipitate of MeOH ex. by activited guided fractionation. 5.8-epidioxy ergosta-6.22-dien-3ol. palmitic acid. linoleic acid, and methyl linolate. 3.4-dihydroxybenzoic acid methylester and 4-(3'4'-Dihydroxyphenyl)-3-butene-2one were isolated. DPPH method was used to examine of antioxidative activity of the isolated compounds. As the result, 3.4-dihydroxybenzoic acid methylester, and phenolic compound. 4-(3'4'-Dihydroxyphenyl) -3-butene-2one were found to be a scavenger of 1,1-diphenyl-2-picrylhydrzyl radical. (omitted)

• Bulletin of the Korean Chemical Society
• /
• v.13 no.5
• /
• pp.556-559
• /
• 1992

Hydrocarbon solution of $(PPh_3)_2(CO)MOSO_2CF_3$ (M= Rh, Ir) reacts rapidly with 1,4-dicyanobenzene or 1,4-dicyano-2-butene to yield dinuclear metal complexes $[(PPh_3)_2(CO)M({\mu}-dicyanobenzene)M(CO)(PPh_3)_2](SO_3CF_3)_2$ (I: M = Rh; II: M = Ir) or $[(PPh_3)_2(CO)M({\mu}-dicyano-2-benzene)M(CO)(PPh_3)_2](SO_3CF_3)_2$ (III: M = Rh; IV: M = Ir), respectively. Compounds I, II, III, and IV were characterized by $^1H$-NMR, $^{31}P$-NMR, and infrared spectrum. Dichloromethane solution of II and IV reacts with $H_2\;and\;I_2$ to yield oxidative addition complexes $[(PPh_3)_2(CO)IrX_2({\mu}-E)X_2Ir(CO)(PPh_3)_2](SO_3CF_3)_2$ (V; E = 1,4-dicyanobenzene, $X_2$ = $H_2$; VI : E = 1,4-dicyano-2-butene, $X_2$ = $H_2$; VII; E = 1,4-dicyanobenzene, $X_2$ = $I_2$). All metal complexes are bridged by the cyanide groups. Compounds Ⅴ, Ⅵ, and Ⅶ are characterized by conventional methods.

• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.14-21
• /
• 2001

To increase the properties of EVA foam such as tensile strength, rebound resilience, and compression set, ethylene-1-butene copolymer (EtBC) was blended with EVA. After that crosslink characteristics of the blends and cell structures and mechanical properties of the foam were studied. As the amount of EtBC increased in EVA/EtBC blends, torque values of oscillating disc rheometer(ODR) increased and the foaming ratio decreased because the viscosity and crosslink density of EVA/EtBC blends increased. Foaming ratio and cell size of the foam increased by increasing the amount of foaming agent. When compared the mechanical properties of the foam which have same densities, tensile strength, rebound resilience, and compression set properties of the foam were improved by increasing the amount of EtBC in the EVA/EtBC blends.