• Environmental Engineering Research
• /
• v.17 no.4
• /
• pp.217-225
• /
• 2012

In this study, the treatability of two target contaminants during the Fenton reaction, n-hexadecane and 1-methylnaphthalene, was evaluated as a function of the amounts of $FeCl_2$ and $H_2O_2$ injected into open and closed reaction systems. In the Fenton reaction of n-hexadecane and 1-methylnaphthalene, the mass recovery of the target contaminants was above 95% in the closed system. However, when the Fenton reaction was performed with high amounts of $H_2O_2$ and $FeCl_2$ injected in the open system, a reduction of approximately 40% of the initial mass of 1-methylnaphthalene was observed. This trend may be explained by the unique physical properties of 1-methylnaphthalene, which has higher volatility than n-hexadecane. Further, this trend was well correlated with the rise in high temperature at the initial reaction stage. Considering the mass recovery of the two target contaminants, the reaction temperature, and the residual concentration of $H_2O_2$ at different amounts of $FeCl_2$ and $H_2O_2$ injected, it can be suggested that the Fenton reaction should be performed with controlled conditions that can provide a suitable reaction environment between oxidant and contaminants.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.560-565
• /
• 2005

Catalytic performances of zeolite catalysts such as H-mordenite(HM), H-Beta$(H{\beta})$, H-USY(HUSY) for the transmethylation between 1-methylnaphthalene(1-MN) and 2-methylnaphthalene(2-MN) were investigated in a fixed-bed flow reactor. $H{\beta}$ showed higher and more stable conversion than others to exhibit a high and stable 2-MN/1-MN ratio of 2.3 and 2,6-DMN/2,7-DMN ratio of 1.3 at the $1^{st}$ hour of time on stream under the reaction conditions as follows: reaction temperature of $350^{\circ}C$, reaction pressure of 1.5 MPa, WHSV of $2.7g_{feed}/g_{cat}{\cdot}h$ and the molar ratio of 1-MN and 2-MN of 1:1. The catalytic behavior has been discussed in relation with the catalyst pore structure and acidity.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.431-435
• /
• 2022

The reduction of nitrogen-containing compounds (NC) containing the model crude methylnaphthalene oil (CMNO) of 5 compounds system was experimentally studied by solvent extraction. The model CMNO consisting of 3 kinds of NC including quinolone (QU), iso-quinoline (IQU), indole(IN) and 2 kinds of bicyclic aromatic compounds such as 1-methylnaphthalene (1MNA), 2-methylnaphthalene (2MNA) as raw materials, as well as the aqueous solution of formamide as a solvent, were used. The increase in the volume fraction of water to the solvent at the initial state (y_w,0) sharply decreased, but the distribution coefficient and the yield of NC conversely increased the selectivity of NC based on 2MNA, and an increase in the volume fraction of solvent to feed (S/F) simultaneously increased the distribution coefficient, yield and selectivity of NC. The yields of QU, IQU and IN under constant conditions (y_w,0 = 0.1, S/F = 1, equilibrium temperature 303 K) were 30%, 31% and 10%, respectively, and selectivity was 15, 15 and 20, respectively. From the excellent yield and selectivity of NC, the formamide extraction method of this study was expected as a method for reducing the NC contained in the model CMNO.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.272-277
• /
• 2013

In this study, the tar compounds derived from the plant cell cultures of Taxus chinensis were first identified and then quantified via gas chromatography/mass spectrometry (GC/MS) and gas chromatography (GC). 2-Picoline, 2,5-xylenol, acenaphthene, 1-methylnaphthalene and o-xylene were found to be the major tar compounds by biomass. These compounds were identified and confirmed by comparing their retention times with those of authentic compounds. Each compound also spiked with the pure standard. The contents of 2-picoline, 2,5-xylenol, acenaphthene, 1-methylnaphthalene, and o-xylene in biomass were 0.2512, 0.1586, 0.1240, 0.0942 and 0.0525 wt%, respectively. Liquid-liquid extraction and adsorbent treatment were able to remove 42% and 94% of the tars from biomass, respectivly. After hexane precipitation, all of the tars were perfectly removed.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.728-732
• /
• 1998

The purpose of this study was to identify off-flavor compounds in sea mustard and rice syrup sold in the markets. Naphthalenes such as naphthalene, 2-methylnaphthalene, 1-methylnaphthalene, 2,6-dimethylnaphthalene, 1,5-dimethylnaphthalene, 1,8-dimethylnaphthalene, 2,7-dimethylnaphthalene, 1,4,6-trimethylnaphthalene, 2,3,6-trimethylnaphthalene etc., were present in sea mustard, while free fatty acids such as butanoic acid, hexanoic acid, heptanoic acid, octanoic acid, nonanoic acid, decanoic acid, dodecanoic acid, tetradecanoic acid and 2-furanmethanol, 2-furancarboxaldehyde etc. in rice syrup. The former (naphthalenes) have been supposed to be contaminents from paint of ship and the latter (free fatty acids) derived from deteriorated rice for saccharification. From the results of the samples studied, formation of their off-flavor compounds seems to be related with the condition of storage, the process of production and circulation in the markets.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.72-78
• /
• 2007

As a basic research fur the separation of effective components included in pyrolysis gas oil, the crystallization on each system of naphthalene with 2-methylnaphthalene, indene and 1-methylnaphthalene as impurity has been carried out in column and cold-finger type crystallizer, respectively. In crystallization operation, the purity of naphthalene has been a tendency of increase with decreasing of cooling rate and in the presence of impurity with lower melting point. In comparison of crystallizer types, naphthalene purity in column type crystallizer was a higher value than that in cold-finger type due to effective sweating operation after crystallization.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.168-172
• /
• 2007

The separation of indole from a model mixture comprising four kinds of nitrogen heterocyclic compounds [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compounds [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN)], biphenyl (Bp) and phenyl ether (Pe) was examined by batch cocurrent 4 stages equilibrium extraction. The model mixture used as a raw material in this work was prepared according to the components and compositions contained in coal tar fraction (the temperature ranges of fraction: $240{\sim}265^{\circ}C$). An aqueous solution of formamide was used as a solvent. Indole was recovered more than 99% through 4 stages of the equilibrium extraction. The range of selectivity of indole in reference to DMN obtained through the 5 stages equilibrium extraction was found to be 63~118. The process for separation and recovery of indole contained in coal tar was studied by using the experimental results obtained from this work and the previous work.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.477-481
• /
• 2022

As a part of improving the quality of crude methylnaphthalene (CMNO), this study was experimentally examined the reduction of nitrogen-containing compounds (NC) present in the CMNO by solvent extraction. The CMNO was composed of three kinds of NC [quinolone (QU), iso-quinoline (IQU), indole (IN)], three kinds of bicyclic aromatic compound [BAC; naphthalene (NA), 1-methylnaphthalene (1MNA), 2-methylnaphthalene (2MNA)] and biphenyl (BP) etc., in addition to an aqueous formamide solution, which were used as raw materials and a solvent, respectively. The increase in the volume fraction of water to the solvent in the initial state (y_w,0) caused a sharp decrease in the distribution coefficient and the yield of NC, but conversely raised the increased selectivity of NC based on 2MNA. The compositions of QU, IQU and IN in the raffinate oil recovered through the equilibrium extraction of batch co-current 5-stage under constant conditions [y_w,0 = 0.1, volume fraction of solvent to feed (CMNO) at the initial state = 1, operating temperature = 303 K, liquid-liquid contacting time = 72 h] were reduced by about 51.5%, 55.2%, and 71.8%, respectively, when compared to those of CMNO. From the excellent reduction rate of NC, the formamide extraction method suggested in this study can be expected to be a useful reduction method for NC contained in the CMNO.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.238-241
• /
• 2010

The purification of indole from 54.3wt% indole fraction (temperature range of distillate: $250{\sim}255^{\circ}C$) recovered by extraction-distillation combination of coal tar fraction (temperature range of distillate: $240{\sim}265^{\circ}C$) was examined by solute crystallization. The feed consists of eight components such as quinoline, iso-quinoline, indole, quinaldine, 1-methylnaphthalene, 2-methylnaphthalene, biphenyl and phenyl ether. Hexane and an aqueous solution of methanol (50 : 50 vol%) were used as the crystallization solvent and the coolant, respectively. A batch stirred tank of glass material was used as a crystallization apparatus. By increasing the operation temperature and the volume ratio of solvent to feed at initial, the purity of indole increas ed, but yields of indole showed a decreasing tendency. Solute crystallization method using hexane as a solvent was excellent because the purity of 99.3 wt% indole was recovered at the yield of 50% without washing operation.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.2
• /
• pp.149-153
• /
• 2004

This study was carried out to compare the major volatile components in essential oil from different origin of Atractylodes spp. which is being traded as a crude herbal drug in Korean herbal markets. From the two Atractylodes of major volatile components were similarly detected such as the ${\beta}-selinene,\;{\beta}-sesquiphellandrene$, germacrene B, 2,7-dimethoxy-2-methylnaphthalene and 9-methoxy-2,3-dihydrofuro{3,2-q}coumarin. Among the volatile components, the major components were 2,7-dimethoxy-2-methylnaphthalene (40.98%), 9-methoxy-2,3-dihydrofuro {3,2-q} coumarin (15.74%), and ${\beta}-sesquiphellandrene$ (1.98%) in both Atractylodes. As a results, It was found that the two Atractylodes were the same species which was being traded in the Korean herbal markets as the A. japonica. not to different species of A. japonica and A. macrocephalla, respectively.