• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2013

The objective of this research was to evaluate the suitability of sigmoidal and firstorder kinetic equations for simulating the methane production from solid wastes. The sigmoidal kinetic equations used were modified Gompertz and Logistic equations. Statistical criteria used to evaluate equation performance were analysis of goodness-of-fit (Residual sum of squares, Root mean squared error and Akaike's Information Criterion). Akaike's Information Criterion (AIC) was employed to compare goodness-of-fit of equations with same and different numbers of parameters. RSS and RMSE were decreased for first-order kinetic equation with lag-phase time, compared to the first-order kinetic equation without lag-phase time. However, first-order kinetic equations had relatively higher AIC than the sigmoidal kinetic equations. It seemed that the sigmoidal kinetic equations had better goodness-of-fit than the first-order kinetic equations in order to simulate the methane production.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.213-218
• /
• 2008

The present study was to investigate the continuous production of alcohol using immobilized carrier manufactured by polymeric materials. Fermentation runs with a crushed rice, with constituents recovered from batch culture and with ones from continuous culture were thus compared. The performances of immobilized carrier were governed by sandwitched synthetic polymers, the evolution of the continuous culture was steadily governed by the production of alcohol in the lag time of batch culture. The main focus was set on the enhancement of the alcohol production by an newly-developed polymeric forms. This polymeric form led to a drastic increase of the microorganism and the production cost in the continuous reactor was thereby reduced. The sandwitched polymeric-formed carrier, which was resistant to external environments, serves as an interesting alternative to maintain the stability of biological process. These whole results were discussed with the aim to better understand the continuous process implied in the microorganism's build-up during cultivation of fermentation broth.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.469-472
• /
• 2006

BI 및 ETABr의 농도변화에 따른 속도상수의 변화는 이 반응이 단순한 1차 및 2차 반응 속도식에 맞지 않는다. 이와 같은 현상은 용액 속에서 두 반응 시약인 p-NPDPIN 및 BI와 상전이촉매인 ETABr 사이에 많은 수의 작은 응집된 입자(aggregates)을 형성함을 의미한다. 수용액 속에서는 불용성인 p-NPDPIN과 수용성인 BI가 충돌하여 반응할 기회가 적은데 반하여 ETABr은 이 두 시약을 함께 수용하여 세 분자 사이에 응집현상이 일어남으로 p-NPDPIN과 BI가 반응하기에 충분한 거리 내에 있게 된다. 바꾸어 말하면, 이 두 반응물질이 1:1 adducts로 반응하기보다는 여러 ETABr과 함께 많은 수의 반응분자들이 회합(응집) 되어 있음을 뜻한다.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.566-570
• /
• 2005

The study on the hydrogenation and isomerization of unsaturated bicyclic hydrcarbon compounds using methylcyclopentadiene dimer (MCPD) was carried out. Exo compound was prepared through isomerization reaction after two hydrogenation reaction steps. In the first hydrogenation reaction which needs one mole of hydrogen, the formation rate of monomer was increased as dimer was decomposed at reaction temperature above $100^{\circ}C$. At first hydrogenation, DHDMCPD [dihydrodi(methylcyclopentadiene)] was formed and second hydrogenation was proceeded to produce THDMCPD [tetrahydrodi(methylcyclopentadiene)], the ratio of exo to endo THDMCPD was varied by the control of 2nd hydrogenation temperature. To improve the process, continuous 1st and 2nd hydrogenation conditions were established by using the 2nd stage heat controllable reactor. Also, catalytic activities were compared by the use of halogenized aluminum, metal halides and solid acids catalysts on the isomerization reaction from endo to exo THDMCPD.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.117-121
• /
• 2003

SBR과 SBBR 모두 대부분의 유기물은 포기기간에 소모되었으며, SBBR의 경우 부족한 유기물 조건에서도 원활한 탈질화 반응이 일어난 것을 볼 때, 유기물 농도가 낮은 우리나라의 하수에 적합한 공정으로 생각된다. 질산화 속도에 있어서는 유기물과 용존산소의 접촉기회에 있어 유리한 조건을 가진 SBR이 더 크게 나타났다. 그러나 탈질화 반응에 있어서는 SBBR이 더 높은 것으로 나타났다. SBR의 경우 높은 $NO_3$의 존재로 인해 1차 비포기 기간중 인의 방출은 거의 발생하지 않았으나, SBBR의 경우 1차 비포기 기간에 인 방출과 1차 포기기간에 인 섭취가 일어났다.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.60-67
• /
• 2016

This study was conducted to establish the adsorption-desorption mechanism and the optimum condition of chromatographic operation for separations of heavy rare earth elements (Gd, Tb, Dy) using a p507-containing resin. By employing Langmuir and Freundlich isotherm together with pseudo first and second order kinetics, absorption-desorption reaction mechanism was investigated. Langmuir and Freundlich isotherm was applied under assumption that adsorption reaction occurs in form of monolayer, and because the result was identical to the assumption, now we know adsorption of heavy rare earth elements occurs in form of monolayer. Concerning the pseudo first and second order kinetic, the pseudo second order seemed to be more suitable to represent heavy rare earth element adsorption mechanism. By using the extraction chromatography to separate heavy rare earth elements, ${\alpha}^{Tb}_{Gd}=1.24$, and ${\alpha}^{Dy}_{Tb}=1.03$ were confirmed in eluent HCl 0.25 M which indicates almost perfect separations of three elements. Furthermore, as concentrations of eluent became higher, the resolution value decreased and the elution area got shortened.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.111-118
• /
• 1991

The kinetic of the gas phase reactions of ozone(0.5 torr) with sulfur dioxide was studied. The SO2 reaction was conducted in the 7∼22 torr range at 90∼155$^{\circ}$C. The reaction rate was faster than the reaction rate of O$_3$ in the presence of CO$_2$ alone. The reaction of O$_3$ with SO$_2$ follows the rate law: -d(O$_3)/dt=k_0(SO_2)(M)(O_3)+2k _1(SO_2)(O_3$). The first term of this rate law arises from a third order molecular reaction predominating in the lower temperature range and gave a rate constant k$_0$ = (9.35 $\pm$ 8.6) ${\times}$ 10$^9$e$^{-(11.05{\pm}2.04)kcal/RT}(M^{-2}s^{-1}$). The second term of the above rate law derived from a second order thermal decomposition reaction which was the major part of the reaction and gave a rate constant k$_0 =(9.35{\pm}8.6){\times}10^9e^{-(11.05{\pm}2.04)kcal/RT}(M^{-2}s^{-1}$). The overall reaction proceeds with kinetics of complex order composed mainly of second order and third order components.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.804-811
• /
• 2011

The aim of this study is to evaluate the applicability of adsorption models for understanding adsorption properties of adsorbents. For this study, the adsorption charateristics of $NO_3^-$ by commercial anion exchange resin, PA-308, were investigated in bach process. The adsorption kinetic data for $NO_3^-$ by anion exchange resin showed two stage process comprising a fast initial adsorption process and a slower second adsorption process. Both the pseudo-first-order kinetic model and the pseudo-second-order kinetic model could not be used to predict the adsorption kinetics of $NO_3^-$ onto anion exchange resin for the entire sorption period. Only the fast initial portion ($t{\leq}20min$) of adsorption kinetics was found to follow pseudo-first-order kinetic model and controlled mainly by external diffusion that is very fast and high, whereas, the slower second portion (t > 20 min) of adsorption kinetics seems to be controlled by a second-order chemical reaction and by intraparticle diffusion.

• Membrane Journal
• /
• v.10 no.2
• /
• pp.83-91
• /
• 2000

In order to improve functional properties, enzymatic hydrolysis of FPC (fish protein concentration) was achieved in ultrafiltration membrane reactor (MWCO 5,000). First, insoluble FPC was hydrolyzed by pepsin in batch reactor to decrease the fouling in ultrafiltration membrane reactor, and second hydrolysis was achieved by pronase E in ultrafiltration membrane reactor The optimum operating conditions in batch reactor using pepsin were at temperature 45$^{\circ}C$, pH 2.0 and the ratio of substrate to pepsin, 150 (w/w) After operating for 5hrs under optimum conditions, 89％ of total amount of initial FPC was hydrolyzed. The rate constants, $K_{m}$ and V$_{max}$, were 1.25％ and 0.89 mg/$m\ell$/min, respectively, and substrate inhibition was occured above 1.5％. The ultrafiltration membrane reactor was operated with recycling rate of 474 $m\ell$/min and transmembrane pressure of 15 psi. The permeate flux was increased by temperature, transmembrane pressure, but the permeate flux was fixed by pH. The optimum ratio of substrate to pronase E was 200(w/w) and the productivity of ultrafiltration membarane reactor was 702 mg/mg -enzyme, that of batch reactor was 51mg/mg-enzyme. Molecular weight distributions tot first and second hydrolysates were from 2,500 Da to 20,000 Da and from 700 Da to 10,000 Da, respectivelyly.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2017

In order to improve the anaerobic digestion efficiency of the sewage sludge, the methane potential of the hydrolysate generated from the hydro-thermal reaction at 170, 180, 190, 200, 210, $220^{\circ}C$ was analyzed and the constitutional characteristics of the organic materials were estimated by dividing organic materials of hydro-thermal hydrolysate into easily biodegradable, decomposition resistant, and non-biodegradable organic materials applying the parallel first order kinetics model. The ultimate methane potential of sewage sludge hydro-thermal hydrolysate increased to 0.39, 0.39, 0.40, 0.44, 0.45, and $0.46Nm^3/kg-VS_{added}$ as hydro-thermal reaction temperature increased from 170, 180, 190, 200, 210, $220^{\circ}C$. It has been shown that the organic matter of sewage sludge is solubilized to increase the content of biodegradable organic material($VS_B$). The easily degradable organic matter($VS_e$) content was highest at hydro-thermal reaction temperature of 200 and $210^{\circ}C$, and optimum hydro-thermal reaction temperature for organic matter solubilization of sewage sludge was in the range of $200{\sim}210^{\circ}C$. In addition, the amount of biodegradable organic material($VS_B$) and easily biodegradable organic matter ($VS_e$) in the hydrolysate of sewage sludge was the highest at hydro-thermal reaction temperature of $200^{\circ}C$.