• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2009

By the advent of the high resolution satellite imagery, a ground-coverage included by a single satellite image is decreased. By the reason, there are increasing needs in image mosaicking technology to use images to various GIS fields. This paper describes an edge-based seamline extraction algorithm using edge information such as rivers, roads, buildings for image mosaicking. For this, we developed a method to track and link discontinuous edges extracted by edge detection operator. To estimate the effectiveness of the proposed algorithm, we applied the algorithm to IKONOS, KOMPSAT-1 and SPOT-5 satellite images. The experimental results showed that the algorithm successfully dealts with discontinuities caused by geometric differences in two images.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.95-99
• /
• 1999

돼지 심장의 해부학적 구조에 대해서는 많은 연구가 보고되어 있으나 흉골 정중선 절개와 방정중선 절개 후 절개선에 나타나는 돼지 심장 대혈관들의 외과적 해부구조에 대한 보고는 아직 없고 심장적출 및 수술에 외과적 해부구조의 숙지가 필수적이므로, 체중 15kg - 25kg의 돼지 12마리를 4마리씩 3군, 즉 정중선절개군, 우측방정중선절개군, 좌측방정중선절개군으로 나누어 흉골열개 후 나타난 심장 대혈관들의 육안적 외과구조를 보고하고 심장적출술을 시도해 각 수술절개 접근법에 따른 수술의 용이성을 관찰하여 더 나은 수술접근법을 선택하는데 필요한 정보를 제공하고자 본 실험을 실시하였다. 그 결과, 우측과 좌측 방정중선절개법에 의해 흉골을 완전 열개시에는 제 1흉골과 갑상연골 부위에서 정중선으로 접근하는 초승달형 절개를 통해 internal mammary artery의 절개 위험성을 피할 수 있음을 발견하였고 흉골정중선절개에서는 상행대동맥의 정 중앙부에 aortic cannula를 쉽게 장착할 수 있었고 특히 비숙련자에게 더 적절한 수술 방법임을 알 수 있었다. 한편 숙련자가 심장적출이 아닌 동맥관개존증등과 같은 심장수술의 경우에는 방 정중선절개로써 환축의 수술 후 통증을 감소시키고 조기치유가 가능하다면, 초승달형 절개법을 응용한 방정중선 절개를 권할 수 있고 이에 따른 임상적 관찰이 요구되는 바이다.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.161-166
• /
• 2003

To evaluate the performance of cadmium sulfide as a multi-function X-ray dosimeter, we made an X-ray detector that was based on cadmium sulfide using evaporation technology, and measured its response to X-ray exposure. The voltages of cadmium sulfide were measured on the various X-ray tube potentials, X-ray tube currents and exposure times. The regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0995x-0.1146 ($R^2$=0.9595, $\sigma$=0.08, standard error=2%) and the regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0439x+1.1891 ($R^2$=0.9021, $\sigma$=0.04, standard error=1.8%) The regression analysis of the voltage response of CdS on the X-ray exposure time variation was y=8.2853+5.5878 ($R^2$=0.7287, $\sigma$=0.06, standard error=1.9%). In conclusion, cadmium sulfide responded linearly to the variation X-ray conditions, suggesting cadmium sulfide to be a feasible X-ray sensor of multi-function dosimeter related instruments.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.237-242
• /
• 2013

When abdomen and pelvic were scanned with 128 channel MDCT, the gonadal exposure dose was measured with and without gonadal shield and the obtained images were evaluated. As a result, during abdominal MDCT scan, the gonadal exposure dose was measured $16.5{\pm}0.5$ mGy when the gonad shield was not used, and it was $7.5{\pm}0.3$ mGy when the large gonad shield($650m^2$) was used, which showed the effect of reduction in the gonadal exposure dose by 54%. During pelvic MDCT scan, the gonadal exposure dose was $9.5{\pm}0.3$ mGy when the gonad shield was not used, and it was $2.8{\pm}0.2$ mGy when the large gonard shield($650m^2$) was used, which showed the effect of reduction in the gonadal exposure dose by 70%. The images were obtained when using the gonad shield and when not using it during MDCT scan, and as a result of analyzing them with 5-point Likert scale, in the abdominal image, it was 4.1 points irrespective of whether using the gonad shield or not. And also, in pelvic scan, it was 1.2 points when the gonad shield was used, and 4.1 points when it was not used. With the results above, it is considered that during the abdominal 128-MDCT scan, by using the gonad shield, the images should be obtained without being degraded and the exposure dose must be reduced.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.255-260
• /
• 2012

This study aims to examine the generation of scatter rays by dividing it into the presence of the subject at the chest X-ray examination, the X-ray tube and detector in the X-ray room, the front of the patient window, the outside of the entrance door of the patient waiting room, opening of the entrance door, the outside of the radiological technologist's entrance door, and the opening of the radiological technologist's entrance door, etc. When there is a subject, as the subject is thicker, more scatter rays occur at each of the spots for measurement. And when the entrance door is closed at the measurement, fewer scatter rays are generated.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.71-78
• /
• 2017

Scattered radiation is inherent phenomenon of x-ray, which occurs to the subject (or patient). Therefore it cannot be avoidable but also interacts as serious noise factor because the only meaningful information on x-ray radiography is primary x-ray photons. The purpose of this study was to quantify scattered radiation for various shooting parameters and to verify the effect of anti-scatter grid. We employed beam stopper method to characterize scatter to primary ratio. To evaluate effect on the projection images calculated contrast to noise ratio of given shooting parameters. From the experiments, we identified the scattered radiation increases in thicker patient and smaller air gap. Moreover, scattered radiation degraded contrast to noise ratio of the projection images. We find out that the anti-scatter grid rejected scattered radiation effectively, however there were not fewer than 100% of scatter to primary ratio in some shooting parameters. The results demonstrate that the scattered radiation was serious problem of medical x-ray system, we confirmed that the scattered radiation was not considerable factor of dig ital radiog raphy.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.47-54
• /
• 2017

This paper analyzed the motion characteristics of two ships according to the ship's dimension using Ship Handling Simulator. When the panamax container ship passes the smaller ship, peak point and patterns of interaction forces for the moored ship are noticeable. Accordingly, special attention should be paid to the movements of moored ship because surge force and yaw moment changes in the opposite direction before and after condition of ship's beam. However, when the container ship passes the larger moored ship in reverse, peak point stood out on the passing ship at the beginning of ship-to-ship interaction and attraction force on the passing ship occurred steadily during 1L(length overall of passing ship) interval at a point of beam. In addition, as the lateral distance between the hull of two ships decreases less than 2B(breadth of passing ship), interaction forces on the passing ship at the beginning are sharply increase.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2011

Power Line Communication (PLC) is a system for carrying data on a conductor used for electric power transmission. Recently, PLC has received much attention due to connection efficiency and possibility of extension. It can be used for not only alternative communication, in which communication line is not sufficient, but also for communication between home appliances. Korea Electronic Power Cooperation (KEPCO) is constructing the system, which automatically collects values of power consumption of every household. Due to the randomness and complicated physical characteristics of PLC protocol (KS X4600-1), it has been believed that the current PLC is secure in the sense that it is hard that an attacker guesses or modifies the value of power consumption. However, we show that the randomness of the protocol is closely related to state of the communication line and thus anyone can easily guess the randomness by checking the state of the communication line. In order to analyze the security of PLC, we study the protocol in detail and show some vulnerability. In addition, we suggest that PLC needs more secure protocol on higher layers. We expect that the study of PLC help in designing more secure protocol as well.

• Electronics and Telecommunications Trends
• /
• v.28 no.6
• /
• pp.1-12
• /
• 2013

미래 데이터 트래픽은 유선에서 무선으로 트래픽의 비중이 증가하고 있으며 데이터 트래픽의 규모도 급격히 증가될 것으로 예측되고 있다. 데이터 트래픽을 효과적으로 수용하기 위하여 단일한 전송 기술을 이용하는 방식 보다는 다양한 유무선 전송 기술을 기반으로 효과적으로 다양한 유무선 자원을 제어하고 상황에 따라 최적의 전송 기술을 적용함으로써 제한된 유무선 자원을 효율적으로 이용하는 기술이 필요하다. 미래 통신 네트워크는 다양한 액세스 망을 통합 관리함으로써 망구축 비용 및 운영비용을 절감하고 효과적으로 망 자원을 이용하며 새로운 요구사항을 가지는 신규 서비스에 적절히 대응하기 위하여 유연하고 지능화된 유무선 융합 네트워크 구조로 발전되어야 한다. 본 문서에서는 유무선 융합 네트워크 기술을 중심으로 지금까지 진행된 융합 기술에 대해 간단히 살펴보고 유럽을 중심으로 현재 연구되고 있는 유무선 융합 기술에 대하여 설명한다. 그리고, 2020년의 1,000배 트래픽을 수용하기 위한 5G 모바일 코어망의 요구사항에 대하여 살펴 본다.

• 전기의세계
• /
• v.45 no.1
• /
• pp.10-15
• /
• 1996

가공송전망 고전압화는 세계적으로는 1,000KV까지 검토되고 있으며 우리나라에서도 765KV를 시험 운전추진중에 있다. 송전선의 전류용량 증대방법으로서는 도체크기의 대형화, 다도체화 뿐만 아니라 경 알루미늄을 도체로 사용한 종래의 ACSR을 대체할 수 있는, 초내열 알루미늄선을 사용하여 허용전류를 증가시킨 STACIR의 채택이 확대되고 있다. 증용양화 송전선의 본격적 도입과 함께 송전선로 운영시에 발생하는 공해성, 환경저해성을 촤소화시키는 환경조화선로및 지역별 특성에 맞는 특수기능 전선에도 그 관심이 고조되고 있는바 도체재료와 구조에 대한 꾸준한 기술 개발로 송전선의 고신뢰화, 다기능화가 지속적으로 진행되고 있다. 우리나라의 경우도 1960년대에 ACRS이 가설된 이후 늘어나는 전력수요에 부응하기 위하여 1995년 STACIR의 154KV 의정부-동두천 송전선로 구간에 가설운전을 시작으로 신송전로의 시대에 진입했다고 볼 수 있다.