• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.564-567
• /
• 1997

This paper deals with the problem of extraction of voice signal embedded in 1/f noise. We propose the extraction method using wavelet. This method is based on Wornell's modelling which can construct 1/f process in terms of uncorrelated variables and is well suited on treating 1/f process. Finally, we show further describe our method through simulation.

• 청정기술
• /
• 제9권3호
• /
• pp.115-124
• /
• 2003

생물산업(bio industry)은 90년대 이래로 연평균 32%의 고성장을 하고 있다. 환경문제와 연계한 무역장벽을 극복하기 위해서는 제품생산과정에서 발생되는 오염물을 최대한 감소시키고 재활용하는 등 기업에서의 청정생산기술의 개발 및 적용을 위한 노력이 절실히 필요한 때이다. 본 연구는 폴리만뉴로닉산 생산공정에서 발생하는 공정수에 대해 경제적이며 효율적인 처리수의 재이용 방안을 강구하기 위하여 분리막 시스템의 효용성을 검토하였다. 분리막공정의 개별 적용시 U/F 10k는 40%, U/F 1k는 60%, N/F는 80%의 농축이 가능하였고 U/F 1k와 N/F를 연속적용시 90%까지 농축 가능하였다. 탈수후 여액에서 폐기되는 제품의 손실량이 많았으나, 분리막 공정의 도입으로 인하여 폐액으로부터 제품의 회수를 통하여 약 25%의 생산수율을 향상할 수 있었다.

• 동아시아식생활학회지
• /
• 제15권4호
• /
• pp.475-482
• /
• 2005

As Korea has approached the aging society, older Koreans have become an important force in restaurant sales today. To succeed with this silver market, it is important for restaurant managers to know who they are and which factor influence the older Koreans' eating-out decision making process. The purpose of this study was to investigate the effect of the elderly consumers financial independency on restaurant selection process. Data were collected from 178 older consumers above 55 years old and analyzed using the descriptive statistic analysis, MANOVA, and one-way ANOVA. The results showed that the elderly consumers financial independency significantly influenced the decision making process in determining where they eat out Significant differences were found between high income group and low income group in the Problem Recognition Step(Wilks' Lambda=0.776, F=3.796), Information Search Step(Wilks' Lambda=0.779, F=2.959), Alternative Evaluation Step (I :Wilks' Lambda=0.835, F=1.748/ II :Wilks' Lambda=0.764, F=3.212), and Purchase Decision Step(Wilks' Lambda=0.849, F=2.412), except the Post-Purchase Behavior(Wilks' Lambda=0.933, F=1.179). The more financially independent older consumers were, the more directly they were involved in the eating out decision making process. Older consumers with higher income and more personal property were likely to 'propose to eat out by themselves'(F=10.986), to obtain restaurant information from the 'printed materials'(F=9.707), to consider 'convenient location' as most important factor when they eat out(F=5.594), and to go to 'family restaurant'(F=7.067), 'Japanese restaurant'(F=7.391) and 'fine dining restaurants'(F-=6.382). In conclusion, we found that the elderly consumers financial independency did influence the eating-out decision making process. Considering that older Korean will become a financially independent consumer and will be eating away from home more often, food service operations should actively position themselves for this market and develop the market-driven menus and services to meet their needs and expectations.

• 대한전자공학회논문지SD
• /
• 제39권1호
• /
• pp.31-38
• /
• 2002

0.35㎛-비아(via) 식각공정을 개선하기 위하여 C₂F/sub 6/가스의 식각특성을 분석하였다. 실험한 재료는 TEOS/SOG/TEOS 막을 올린 8인치 웨이퍼이며, 실험의 기법은 직교행열(Orthogonal array matrix) 실험 방식을 활용하였다. 산화막 식각에 이용된 장비는 transformer coupled plasma(TCP) source 방식이며 고밀도 플라즈마(HDP)장비이다. 실험의 결과는, 실험변수의 범위 내에서 C₂F/sub 6/는 0.8㎛/min-1.l㎛/min 범위의 식각속도를 보이며 균일도(Uniformity)는 ±6.9%미만으로 측정되었다. CD 변화(skew)는 식각 전과 후를 비교하여 10% 미만이었고 그 결과 비등방성(anisotropic) 식각의 특성이 우수하였다. C₂F/sub 6/를.20sccm 공급할 때 문제점이 발견되지 않았지만 14sccm을 공급하면 SOG 막의 내벽이 침식당하는 문제점이 있었다. 결과적으로 C₂F/sub 6/는 HDP TCP에서 빠른 식각비와 넓은 공정창(process window)을 가진 식각특성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.505-508
• /
• 1989

A computer simulation code of UV preionized discharge KrF laser is developed, including time dependent circuit equations, boltzmann equations, and plasma kinetic equations for various atomic and molecular species. Rate constants for electron collision processes are calculated with a boltzmann equations as a function of E/N. In this study, we studied mainly the $KrF^*$ formation process, relaxation process, and the 248nm absorption process as a function of charging voltage.

• 한국전자파학회논문지
• /
• 제14권5호
• /
• pp.536-541
• /
• 2003

본 논문에서는 다이아몬드 표면에의 산소흡착을 억제함으로써 양호한 전기적특성을 가지는 다이아몬드 MISFET를 제작하기 위해 초고진공 프로세스(ultrahigh vacuum process)에 의해 A1/Ca $F_2$/diamond MISFET를 제작하였다. 박막반도체 다이아몬드의 표면도전층으로서는 불소종단에 의해 형성되는 표면 도전층을 이용하였다. 초고진공 프로세스에 의해 제작된 A1/Ca $F_2$/diamond MISFET로부터 상용화된 실리콘 MOSFET와 동등한 레벨인~$10^{11}$ /$cm^2$ eV의 저농도의 표면준위밀도가 관측되었고, 유효이동도 $\mu$ $e_{ff}$ 는 이제까지 발표된 박막반도체 다이아몬드 FET중 최고치인 300 $cm^2$/Vs 이었다. 본 논문에서는 또한 초고진공 프로세스에 의해 제작된 Al/Ca $F_2$/diamond MISFET를 이용하여 인버터회로(inverter circuit)를 제작하였으며, 고온고주파 환경에서 양호한 전기적 특성을 관찰하였다. 본 논문의 특징은 초고진공 프로세스에 의해 제작된 불소화 다이아몬드 박막반도체 MISFET에 관한 최초의 보고이며, 또한 다이아몬드 박막반도체 MISFET의 인버터회로(inverter circuit)동작에 관한 최초의 보고이다.다.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2021

In this study, we investigate the injection molding of f-theta lens, an important element of the laser scanning unit of laser printers and scanning systems. The f-theta lens is an aspherical plastic lens that must be molded with a precision of seconds. An injection molding method is often used for mass producing aspherical plastic lenses at a low cost. In the injection molding process, costs related to forming and injection are included. Therefore, in this study, to determine the shrinkage and deformation of injection molded f-theta lens, we predict the pressure and temperature distributions. Further, based on the analysis of the predictions, we maximize the design efficiency and verify the cost and development period reduction.

• 성인간호학회지
• /
• 제15권3호
• /
• pp.483-492
• /
• 2003

Purpose: The study was performed to identify the process of change, decisional balance and self-efficacy corresponding to the stage of smoking cessation behavior based on Transtheoretical Model in industrial workers. Method: A convenience sample of 146 industrial workers except for the never smokers, were recruited at a H industry in Ulsan. Data were collected from February 1 to 28, 2002. The research instruments were Stages of Change of Smoking Cessation Measure(DiClemente et al, 1991), Process of change(Prochaska, 1988), Smoking Abstinence Self Efficacy (SASE: DiClemente et al, 1985) and Decisional balance(SDB; Kim, 1999). Result: The results of this study were as follows; 1. The subjects were distributed in each stage of smoking cessation change: There were 64 subjects (43.0%) in the precontemplation stage, 35 subjects(23.5%) in the contemplation stage, 28 subjects(18.8%) in the preparation stage, 14 subjects(10.1%) in the action stage and 7 subjects(4.7%) in the maintenance stage. 2. Analysis of variance showed that experiental process(F=2.808, p=.042), behavioral process (F=4.567, p=.004) self-efficacy(F=9.809, p=.000), pros(F=11.107, p=.000), cons(F=6.686, p=.000), pros- cons(F=3.446, p=.018) were significantly associated with the stages of smoking cessation change. 3. Through discriminant analysis, it was found that 'PROS' was the most influential variable in discriminating the four stages of change. Conclusion: This study can provide the basis of staged matching smoking cessation program using TTM for more effective and useful intervention.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.1-4
• /
• 2007

The total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcinations process and XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcinations was improved to be 2.8um by applying slot-die coating method. In particular, addition of Samarium shows critical current of $I_c=273A/cm-w(J_c=3.8MA/cm^2)$. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solution in MOD process.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.430-434
• /
• 2014

$SiC_f$/SiC composites were prepared using the hybrid process of chemical vapor infiltration (CVI) and polymer impregnation and pyrolysis (PIP). Before the application of PIP, partially matrix-filled preform composites with different densities were fabricated by control of chemical vapor infiltration time and temperature. The changes of the final density of the $SiC_f$/SiC composites had a tendency similar to that of preform composites partially filled by CVI. Composites with lower density after the CVI process had a larger increment of density during the PIP process. Three types of microstructures were observed on the fractured surface of the composite: 1) well pulled-out fibers and lower density, 2) slightly pulled-out fibers and higher density, and 3) only bulk SiC. The different fractions and distributions of the microstructures could have an effect on the mechanical properties of the composites. In this study, $SiC_f$/SiC composites prepared using a hybrid process of CVI and PIP had density values in the range of $1.05{\sim}1.44g/cm^3$, tensile strength values in the range of 76.4 ~ 130.7 MPa, and fracture toughness values in the range of $11.2{\sim}13.5MPa{\cdot}m^{1/2}$.