• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.564-567
• /
• 1997

This paper deals with the problem of extraction of voice signal embedded in 1/f noise. We propose the extraction method using wavelet. This method is based on Wornell's modelling which can construct 1/f process in terms of uncorrelated variables and is well suited on treating 1/f process. Finally, we show further describe our method through simulation.

• Clean Technology
• /
• v.9 no.3
• /
• pp.115-124
• /
• 2003

Bio industry had rapidly grown up to about 32% annualy mean since '90. To overcome a trade barrier related with environmental issues, which were needed to reduce and reuse pollutants generated from the manufacturing process of product to develop and apply cleaner technology. In this paper, the usefulness of membrane process were surveyed for economical and effective treatment of waste water which were discharged from the production of polymannuronic acid. Concentration efficiencies for U/F 10k, U/F 1k, and N/F were 40%, 60%, and 80% by batch operation. Concentration efficiencies for a combination process of U/F 1k and N/F were 90% by continuous operation. There were a lot of loss of product, which could improve 25% of productivity with recovering product by introducing membrane process.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.4
• /
• pp.475-482
• /
• 2005

As Korea has approached the aging society, older Koreans have become an important force in restaurant sales today. To succeed with this silver market, it is important for restaurant managers to know who they are and which factor influence the older Koreans' eating-out decision making process. The purpose of this study was to investigate the effect of the elderly consumers financial independency on restaurant selection process. Data were collected from 178 older consumers above 55 years old and analyzed using the descriptive statistic analysis, MANOVA, and one-way ANOVA. The results showed that the elderly consumers financial independency significantly influenced the decision making process in determining where they eat out Significant differences were found between high income group and low income group in the Problem Recognition Step(Wilks' Lambda=0.776, F=3.796), Information Search Step(Wilks' Lambda=0.779, F=2.959), Alternative Evaluation Step (I :Wilks' Lambda=0.835, F=1.748/ II :Wilks' Lambda=0.764, F=3.212), and Purchase Decision Step(Wilks' Lambda=0.849, F=2.412), except the Post-Purchase Behavior(Wilks' Lambda=0.933, F=1.179). The more financially independent older consumers were, the more directly they were involved in the eating out decision making process. Older consumers with higher income and more personal property were likely to 'propose to eat out by themselves'(F=10.986), to obtain restaurant information from the 'printed materials'(F=9.707), to consider 'convenient location' as most important factor when they eat out(F=5.594), and to go to 'family restaurant'(F=7.067), 'Japanese restaurant'(F=7.391) and 'fine dining restaurants'(F-=6.382). In conclusion, we found that the elderly consumers financial independency did influence the eating-out decision making process. Considering that older Korean will become a financially independent consumer and will be eating away from home more often, food service operations should actively position themselves for this market and develop the market-driven menus and services to meet their needs and expectations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.31-38
• /
• 2002

In order to improve the 0.35 $mutextrm{m}$-via hole etching process the etching characteristic of the gas $C_2F_{6}$ has been analyzed. The samples were triple-layer films(TEOS/SOG/TEOS) on 8-inch wafers and the orthogonal array matrix technique was used for the process. The equipment for etching was the transformer coupled plasma (TCP) source which is a type of high density plasma(HDP). This experiment showed the etching rate for $C_2F_{6}$ was 0.8 $mutextrm{m}$/min-1.1 $mutextrm{m}$/min and the measured uniformity was under $pm$6.9% in the matrix window. The CD skew comparison between pre and post-etching was under 10% which is an outstanding results in the window of profile in anisotropic etching. There was no problem in C2F6 with the flow rate of 20sccm, but when 14sccm of $C_2F_{6}$ was supplied there was a recess problem on the inner wall of SOG film. Consequently the etching characteristic of $C_2F_{6}$ shows a fast etching rate and a very wide process window in HDP TCP.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.505-508
• /
• 1989

A computer simulation code of UV preionized discharge KrF laser is developed, including time dependent circuit equations, boltzmann equations, and plasma kinetic equations for various atomic and molecular species. Rate constants for electron collision processes are calculated with a boltzmann equations as a function of E/N. In this study, we studied mainly the $KrF^*$ formation process, relaxation process, and the 248nm absorption process as a function of charging voltage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.536-541
• /
• 2003

In order to avoid oxygen contamination on the diamond surface as far as possible during the device process, the A1/Ca $F_2$/diamond MISFET(metal-insulator-semiconductor field-effect transistor) was prepared by ultrahigh vacuum process and its electrical properties were investigated. The surface conductive layer of fluorinated diamond surface was employed for the conducting channel of the MISFET. The observed effective mobility(${\mu}$e$\_$ff/) of the MISFET was 300 c $m^2$/Vs, which is the highest value obtained until now in the diamond FET. Besides, the measured surface state density of the device was ∼10$\^$11//c $m^2$ eV, which is comparable with conventional Si MOSFET$\_$s/(metal-oxide-semiconductor field-effect-transistors). This work is the first report of the fluorinated diamond MISFET prepared by ultrahigh vacuum process and its application to inverter circuit.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2021

In this study, we investigate the injection molding of f-theta lens, an important element of the laser scanning unit of laser printers and scanning systems. The f-theta lens is an aspherical plastic lens that must be molded with a precision of seconds. An injection molding method is often used for mass producing aspherical plastic lenses at a low cost. In the injection molding process, costs related to forming and injection are included. Therefore, in this study, to determine the shrinkage and deformation of injection molded f-theta lens, we predict the pressure and temperature distributions. Further, based on the analysis of the predictions, we maximize the design efficiency and verify the cost and development period reduction.

• Korean Journal of Adult Nursing
• /
• v.15 no.3
• /
• pp.483-492
• /
• 2003

Purpose: The study was performed to identify the process of change, decisional balance and self-efficacy corresponding to the stage of smoking cessation behavior based on Transtheoretical Model in industrial workers. Method: A convenience sample of 146 industrial workers except for the never smokers, were recruited at a H industry in Ulsan. Data were collected from February 1 to 28, 2002. The research instruments were Stages of Change of Smoking Cessation Measure(DiClemente et al, 1991), Process of change(Prochaska, 1988), Smoking Abstinence Self Efficacy (SASE: DiClemente et al, 1985) and Decisional balance(SDB; Kim, 1999). Result: The results of this study were as follows; 1. The subjects were distributed in each stage of smoking cessation change: There were 64 subjects (43.0%) in the precontemplation stage, 35 subjects(23.5%) in the contemplation stage, 28 subjects(18.8%) in the preparation stage, 14 subjects(10.1%) in the action stage and 7 subjects(4.7%) in the maintenance stage. 2. Analysis of variance showed that experiental process(F=2.808, p=.042), behavioral process (F=4.567, p=.004) self-efficacy(F=9.809, p=.000), pros(F=11.107, p=.000), cons(F=6.686, p=.000), pros- cons(F=3.446, p=.018) were significantly associated with the stages of smoking cessation change. 3. Through discriminant analysis, it was found that 'PROS' was the most influential variable in discriminating the four stages of change. Conclusion: This study can provide the basis of staged matching smoking cessation program using TTM for more effective and useful intervention.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.1-4
• /
• 2007

The total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcinations process and XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcinations was improved to be 2.8um by applying slot-die coating method. In particular, addition of Samarium shows critical current of $I_c=273A/cm-w(J_c=3.8MA/cm^2)$. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solution in MOD process.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.430-434
• /
• 2014

$SiC_f$/SiC composites were prepared using the hybrid process of chemical vapor infiltration (CVI) and polymer impregnation and pyrolysis (PIP). Before the application of PIP, partially matrix-filled preform composites with different densities were fabricated by control of chemical vapor infiltration time and temperature. The changes of the final density of the $SiC_f$/SiC composites had a tendency similar to that of preform composites partially filled by CVI. Composites with lower density after the CVI process had a larger increment of density during the PIP process. Three types of microstructures were observed on the fractured surface of the composite: 1) well pulled-out fibers and lower density, 2) slightly pulled-out fibers and higher density, and 3) only bulk SiC. The different fractions and distributions of the microstructures could have an effect on the mechanical properties of the composites. In this study, $SiC_f$/SiC composites prepared using a hybrid process of CVI and PIP had density values in the range of $1.05{\sim}1.44g/cm^3$, tensile strength values in the range of 76.4 ~ 130.7 MPa, and fracture toughness values in the range of $11.2{\sim}13.5MPa{\cdot}m^{1/2}$.